Skip to main content

NOTICE: Due to a lapse in annual appropriations, most of this website is not being updated. Learn more.

Form submissions will still be accepted but will not receive responses at this time. Sections of this site for programs using non-appropriated funds (such as NVLAP) or those that are excepted from the shutdown (such as CHIPS and NVD) will continue to be updated.

U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

OC-50

50mm_OC_1

The 50mm Orange Cryostat is basically a 70mm with a smaller sample well diameter and a much smaller diameter tailset. This allows the 50mm to fit into almost all the instruments. Where as a 70mm bolts directly to the top of the Huber table a 50mm mounts to the same adapter plate as a CCR. There are two 50mm's available for use at the NCNR.

Useful Dimensions (approximate)
System 50mm
A 974
B 70
C 127
D 330
E 565
F 230
G 910
System Preparation
Pump out Vacuum Jacket > 2 hrs.
LHe Fill ~30 min. / ~30 L
Cooldown to Base Temp. ~4 hrs.
*Click Here for Sample Mounting Info*


Other Capabilities

The capabilities stated so far have been for operation in the standard setup. When using a special setup these capabilities may change, however, many special setups have been used with success. Some of these include: gas handling, transport measurements, high pressure, etc. Any special setups should be discussed with the sample environment staff before being scheduled.

More Information:

Contacts

Created November 21, 2017, Updated March 23, 2020
Was this page helpful?