An official website of the United States government
Here’s how you know
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
At the end of this course, participants will be able to conduct an official inspection and test of vehicle-tank and loading-rack meters using the NIST Examination Procedure Outlines for these devices and the current edition of NIST Handbook 44. Students will participate in presentations regarding meter design, operation, and installation and will learn how to calculate and apply corrections to test results to account for the effects of temperature on metered product and proving equipment. This class includes a combination of classroom lecture, participant-centered exercises, and practical application of the material in a field exercise. This course requires that students participate in a webinar prior to the class on temperature corrections for large-meter testing. Students are also required to complete a self-study course on NIST Handbook 44 prior to attending the class and will be required to complete a one-hour pre-work assignment due on the first day of class. This course includes a written “pre-examination” and a written final examination. In order to be able to independently apply the material taught in this class and attain proficiency with the material, students must supplement this course with ongoing, practical experience under the close supervision of more experienced officials or service personnel until full competence is demonstrated.
As an IACET Accredited Provider, the NIST Office of Weights and Measures (OWM) Training Program offers IACET CEUs for its learning events that comply with the ANSI/IACET Continuing Education and Training Standard.
OWM is authorized to issue IACET CEUs for this ANSI/IACET Standard-compliant training event.
Course Info
After the completion of this course, using your references and notes, you will be able to:
DESCRIBE the requirements specified in NIST Handbook 44 for VTMs and LRMs;
DESCRIBE the components of an inspection of VTMs and LRMs;
DESCRIBE the major functional components of typical VTMs and LRMs;
DESCRIBE the operation of a positive-displacement metering system;
LIST three types of tolerances used when testing VTMs and LRMs.
APPLY the correct applicable tolerance to a VTM and an LRM under test;
DESCRIBE how to select the proper size test draft for a VTM and an LRM test;
NAME three items that will increase your safety when testing a VTM and an LRM;
LIST five items of basic equipment used when testing VTMs and LRMs;
DESCRIBE the proper procedures for setting up, reading, and draining provers;
LIST and DESCRIBE the minimum tests and examination procedures to be performed when testing VTMs and LRMs and describe the purpose of each type of test;
EXPLAIN and APPLY corrections to account for changes in temperature during testing of VTMs and LRMs;
IDENTIFY three key reasons why report forms are important;
LIST the three “categories of devices” relative to sealing and describe the corresponding required methods for sealing each category;
LIST the two basic types of metrological parameters that must be sealed; and
DESCRIBE the tasks that must be completed following the inspection and testing of VTMs and LRMs.
State weights and measures officials. Industry by invitation only.
This class requires attendance in an instructor-led webinar prior to class. Confirmed participants will be sent login instructions closer to the webinar date. Students are also required to complete a pre-work assignment, which will be distributed and reviewed during the webinar; this pre-work assignment is due on the first day of class and is expected to take 1.5 hours to complete.
Participants will be provided with a course manual and a copy of the current NIST Handbook 44.
Request a Scheduled Class –After creating an OWM Contacts System account, request a class in the OWM Contacts System or login to your existing account. View the videos below for detailed instructions.
Request an Unscheduled Course – To indicate your interest in an unscheduled course, visit the OWM Contacts System Menu to review “Courses,” select the Course title, and submit your interest. Unscheduled course requests are periodically reviewed by the instructor. Classes for a course may be scheduled based on the level of participant interest. OWM schedules classes when the minimum number of orders are received.
For additional information, please see the Training FAQs or OWM Contacts System Help, or email your questions to owm [at] nist.gov (owm[at]nist[dot]gov).
All in-person seminars will meet in the NIST Administration Building 101 (Room B11) located at 100 Bureau Drive, Gaithersburg, MD 20899 on the Gaithersburg, MD campus. Please see the NIST Campus Access, Security and Visitor Information page regarding visitor identification requirements, local transportation options, and other information regarding the NIST Gaithersburg, MD campus.
Metrology seminar attendees are required to provide safety-toed footwear complying with at least the I/C-75 rating of ANSI Z41.1 while working in the training laboratory.
Participants must have completed the NIST Handbook-44 Self Study course found at: NIST Handbook 44 (2009 ed) Self-Study Course and participated in the pre-class webinar and completed a prework assignment due on the first day of class.
Participants MUST bring a calculator with at least basic, 4-function capability. Cell phone calculators are not recommended. Participants may also bring laptops; however, laptops are not required for the class.
