Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Metric (SI) Prefixes

SI Prefixes banner
Credit: NIST

As of August 16, 2023 the physics.nist.gov historic SI Units site has permanently retired. This page and complete Metric (SI) Program contains current SI information. Contact TheSI [at] nist.gov (TheSI[at]nist[dot]gov) with comments, questions or concerns.

International System of Units Logo

A benefit of the SI (International System of Units) is that written technical information is effectively communicated, transcending the variations of language – including spelling and pronunciation. Values of quantities are expressed using Arabic symbols for numbers paired with a unit symbol, often with a prefix symbol that modifies unit magnitude.

In the SI, designations of multiples and subdivision of any unit may be arrived at by combining with the name of the unit the prefixes deka, hecto, and kilo meaning, respectively, 10, 100, and 1000, and deci, centi, and milli, meaning, respectively, one-tenth, one-hundredth, and one-thousandth. In certain cases, particularly in scientific usage, it becomes convenient to provide for multiples larger than 1000 and for subdivisions smaller than one-thousandth. The following table of 24 SI prefixes ranging from 1030 to 10−30 are currently recognized for use.

Prefixes

PurposeNameSymbolFactorName


larger quantities
or whole units
quettaQ1030nonillion
ronnaR1027octillion
yottaY1024septillion
zettaZ1021sextillion
exaE1018quintillion
petaP1015quadrillion
tera
Example: terahertz
T1012trillion
giga
Example: gigawatt
G109billion
megaM106million
kilo
Example: kiloliter
k103thousand
hecto
Example: hectare
h102hundred
deka
Example: dekameter
da101ten
   100one
smaller quantities
or sub units
deci
Example: decimeter
d10-1tenth
centi
Example: centigram
c10-2hundredth
milli
Example: milliliter
m10-3thousandth
micro
Example: microgram
μ10-6millionth
nano
Example: nanometer
n10-9billionth
pico
Example: picogram
p10-12trillionth
femto
Example: femtosecond
f10-15quadrillionth
attoa10-18quintillionth
zepto
Example: zeptosecond
z10-21sextillionth
yocto
Example: yoctosecond
y10-24septillionth
rontor10-27octillionth
quectoq10-30nonillionth


The simplified table below shows common metric prefixes and the relationship with their place values. Note that the recommended decimal sign or marker for use in the United States is the dot on the line, which is used to separate whole numbers from parts. Use a leading zero for numbers less than one. The convention of writing a zero before the decimal point is used to ensure that the quantity is appropriately interpreted.

Whole Units

Decimal Units

thousandshundredstensSI unit*tenthshundredthsthousandths
10001001010.10.010.001
kilo-hecto-deka-meter
gram
liter
deci-centi-milli

   * SI base or derived units with special names may be used


Prefix Progress. Since the first eight prefixes were adopted by the CGPM in 1889, there have been five subsequent prefix expansions. This chronological summary highlights these developments.    

Year

Description

Prefix Total

1795Eight original SI prefixes were officially adopted: deca, hecto, kilo, myria, deci, centi, milli, and myrio, derived from Greek and Latin numbers. Initially, all prefixes were represented by lowercase symbols.

8

1889The first General Conference on Weights and Measures (CGPM) approves the 8 prefixes for use.

8

1960Two prefixes were made obsolete:  myria and myrio. Six prefixes were added. Three for forming multiples:  mega, giga, and tera.  Three for forming submultiples: micro, nano, and pico.

12

1964Two prefixes for forming submultiples were added:  femto and atto.  This created an imbalanced situation, where there were more prefixes for small quantities.

14

1975Two prefixes for forming multiples were added:  peta and exa.

16

1991Four prefixes were added. Two for forming multiples:  zetta and yotta.  Two for forming submultiples: zepto and yocto.

20

2022Four prefixes were added.  Two for forming multiples:  ronna and quetta.  Two forming submultiples:  ronto and quecto.

24

Capitalization. SI prefixes for submultiples (smaller quantities or sub units) are formatted with all lowercase symbols while prefixes for multiples (larger quantities or whole units) use uppercase symbols with the exception of three: kilo (k), hecto (h) and deka (da). 

Historical Exception. For historical reasons, the name "kilogram" for the SI base unit of mass contains the name "kilo," the SI prefix for 103. Thus, because compound prefixes are unacceptable, symbols for decimal multiples and submultiples of the unit of mass are formed by attaching SI prefix symbols to g (gram). The names of such multiples and submultiples are formed by attaching SI prefix names to the name "gram." Example: 1 mg, NOT 1 μkg (1 microkilogram).

Spelling. It’s important to note that spelling in NIST publications are made in accordance with the United States Government Printing Office Style Manual, which follows American English writing practices found in Webster's Third New International Dictionary. For example, the prefix deka is used (American English spelling) but not deca (British English). Webster’s pronunciation guidance reflects contemporary American English.

Writing. Guidance is provided to aid general public use of the metric system. Writing with Metric Units discusses common best practices for effectively using SI practices in written communications and is based on NIST LC 1137, Metric Style Guide for the News Media.

SI (International System of Units) Logo
Credit: Pixabay

FAQ: How do I pronounce the prefix giga? The Merriam-Webster Collegiate Dictionary provides two common pronunciations for the scientific term gigawatt. The soft “g” pronunciation is listed first, followed by the hard "g" pronunciation. Prefix Etymology resources list both soft and hard “g” pronunciations. The official language of the BIPM SI Brochure is French and includes an English translation but provides no pronunciation guidance.

 

 

Colorful chart explaining the 7 base units of the SI (International System of Units) and prefix symbols, featuring the Measurement League: Guardians of the SI
Credit: NIST

NIST SI Measurement System Chart (2021) is a colorful chart explaining the 7 base units of the SI, prefix symbols, and features the Measurement League: Guardians of the SI. SI Prefix symbols are featured in the chart and used to represent smaller or larger units by factors that are powers of 10. Submit hard copy requests to TheSI [at] nist.gov (TheSI[at]nist[dot]gov). Chart dimensions: 216 mm by 279 mm (8.5 in by 11 in).

Resources

 

Contacts

Created January 13, 2010, Updated September 4, 2024