Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Tools and Instruments

Displaying 1 - 25 of 32

Cabinet x-ray system

The Smiths Detection 6046si cabinet x-ray system was designed for security screening of bags, parcels and other objects of similar size. The system runs at 160

Differential Scanning Calorimeter

Differential Scanning Calorimetry, or DSC, is a classic thermoanalytical measurement performed on many different types of materials. In our laboratory, it is

Focused Ion Beam

The Nova NanoLab 600 (NNL600) is a Focused Ion Beam Scanning Electron Microscope equipped with spectroscopic detectors to allow elemental and phase measurements

Hysitron PI-85 Picoindentor

This in-situ indentation system can be integrated into electron microscopes as well as being run in other unusual setups. With a load capacity of 150 mN, this

Microcalorimeter Detector

The NIST transition edge sensor microcalorimeter is energy dispersive x-ray spectrometer capable of ~5 eV resolution over a range of energies from hundreds to

Nanocalorimeter Calibration System

The Nanocalorimeter Calibration System is used to calibrate each individual nanocalorimeter sensor chip used in the nanocalorimetry measurements project. The

Nanocalorimeter Measurement System

This Nanocalorimeter Measurement System is used for nanocalorimetry measurements at fast heating rates (100 °C/s to 100,000 °C/s) and measurements of samples

NCAL: Cruciform Test Machine

A cruciform test machine is available in the NIST Center for Automotive Lightweighting. This machine deforms a cross-shaped specimen with four specimen end tabs

NCAL: Forming Limit Press

A forming limit press is available in the NIST Center for Automotive Lightweighting. This machine has been designed based on a modified Marciniak punch

NCAL: Octostrain Test Machine

An octostrain (8 tensile arms) test machine is available in the NIST Center for Automotive Lightweighting. By increasing the number of arms from the four used

NCAL: Tension-Compression Test Machine

A uniaxial sheet tension-compression test machine is available in the NIST Center for Automotive Lightweighting. This machine provides additional constraints to

NCAL: Thermal Imaging Systems

Thermal imaging systems are available in the NIST Center for Automotive Lightweighting. These cameras can be used to measure adiabatic heating during mechanical

NCAL: Uniaxial Test Machines

A variety of uniaxial test machines are available in the NIST Center for Automotive Lightweighting. These include servo-hydraulic and screw-driven test frames

Rubber Process Analyzer

The TA Instruments RPA elite rubber process analyzer (RPA) is a strain-controlled rotational shear rheometer for the characterization of polymers, composites
Was this page helpful?