Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Projects/Programs

Keyword

Organizational Unit

Metrology for Emerging Integrated Systems

Ongoing

The Emerging Integrated Systems Metrology program supports measurements for advanced manufacturing and secure nano-manufacturing, novel devices and electronic materials. Specifically, the program aims to develop the metrology required to enable a quantitative assessment and physical understanding of...

Metrology for extreme ultraviolet lithography

Ongoing

Patterning with light 13 nm brings a host a new challenges Light at 13 nm is well within the vacuum ultraviolet, where radiation is strongly absorbed by all materials. This requires that the technology take place in vacuum and rely on mirrors rather than lenses. Moreover generating sufficient...

RF Metrology for High-Frequency Transistor Models

Ongoing

Due to the challenges of high-frequency measurements, that includes inaccuracy in on-wafer calibration and a lack of instrumentation for transistor characterization, models are currently extracted from low frequency measurements and extrapolated to higher frequencies. This methodology has been shown...

Metrology for Integration of New Magnetic Materials

Ongoing

Integration of magnetic materials remains a key challenge facing advanced packaging technologies. High power applications require voltage conversion at or near the die, and most practical power converters rely on inductors. Beyond power electronics, integration of magnetic components such as...

Photo of the magnetic moment and susceptibility SRMs - platinum cylinder, YIG sphere, Ni sphere, and Ni disk.

Metrology of Magnetic Materials

Ongoing

Currently, the bulk of this project is focused on three main pieces: Thermal MagIC: An SI-Traceable Method for 3D Thermal Magnetic Imaging and Control Magnetic Refrigeration Magnetic Standard Reference Materials (SRMs) Thermal MagIC (MAGnetic Imaging and Control) is focused on developing new...

Metrology of Materials, Surfaces, and Processes for Hybrid Advanced Packaging

Ongoing

The most important part of any bonding process is getting the surfaces to stick. While the physical properties of the films, surfaces, and interfaces in conjunction with the bonding process parameters (pressure, duration, temperature, and post bond anneal) all play important roles, altering the...

metRology for Microsoft Excel

Ongoing

DESCRIPTION: The current version of the metRology for Microsoft Excel add-in focuses on uncertainty analysis using the methods outlined in the JCGM Guide the Expression of Uncertainty in Measurement (often referred to as the GUM). These methods for uncertainty analysis are widely accepted and their...

Metrology for AM Model Validation

Ongoing

Objective To create and openly disseminate measurement datasets, using carefully calibrated, characterized, and newly developed measurement techniques designed for the development and validation of physics-based and data-driven computational AM models and simulations. Technical Idea The project will...

Metrology for Multi-Physics AM Model Validation

Completed

Objective To provide reference data for the validation of multi-physics models of metal additive manufacturing processes to enable improvement of AM process models and more rapid and predictable process development for AM production by manufacturers. What is the Technical Idea? The Metrology for...

Metrology for Nanoimprint Lithography

Completed

Nanoimprint Lithography (NIL) was originally perceived as a versatile, low-cost, and high-resolution patterning alternative for optical lithography in CMOS fabrication. However, it is becoming apparent that NIL has great potential for nanotechnology in general. It is capable of patterning sub-10 nm...

Metrology for Nanolithography

Ongoing

Small Angle Scattering techniques are employed to measure, with sub-nm precision, pattern shape, dimensions, and orientation for structures created in periodic arrays. Critical-Dimension Small Angle X-ray Scattering (CD-SAXS) utilizes the variable-angle transmission scattering from a small beam size...

Nanomaterial-containing Drug Classes graphic

Metrology for Nanomaterials in Medicine

Ongoing

Drug products that incorporate nanomaterials are defined by FDA as non-biological complex drugs (NBCDs). NBCDs are a class of medical products that cannot be defined nor fully identified as traditional small-molecule drugs. NBCDs consist of different components that form a complex hybrid structure...

Metrology of the Ohm

Ongoing

The Metrology of the Ohm Project has been a leader in providing internationally consistent resistance standards that are readily available to support the scientific and industrial foundations of the U.S. economy. Through this very broad customer base, the activities of the project enable cost...

Metrology for Printing and Graphic Arts Substrates

Ongoing

Paper is a complex, heterogeneous, multi-phased material. While there is a significant body of work related to the dielectric properties of cellulose, comparatively fewer studies have been done on printing and writing grades of paper. In our previous work, we have been able to differentiate between...

Metrology of Purity and Contaminants in Solid Materials

Ongoing

Purity evaluations of high-purity bulk materials used in chips manufacturing are calibrated against reference materials that are often not matrix-matched to the materials under test. In other words, differences in the compositions of the calibrants and the samples being analyzed can result in large...

Metrology for Real-Time Monitoring of Additive Manufacturing

Completed

Objective To develop and disseminate metrology methods, tools, data, and standards applied to in-situ monitoring of AM processes, such that manufacturers and their customers can accurately and precisely determine the quality of the fabrication process and resulting parts. What is the Technical Idea...

metRology Software Project

Ongoing

DESCRIPTION: The current version of the metRology package focuses on statistical functions for uncertainty analysis and for the analysis of interlaboratory studies and key comparisons. A number of the functions focus on uncertainty analysis using the methods outlined in the JCGM Guide to the...

Metrology and Standards for Canine Olfactory Detection of Explosives

Completed

Effective and accepted by the public, trained dogs are the most frequently deployed detection systems for identification of explosives threats in mobile applications. In addition to being highly sensitive, dogs can rapidly discriminate the unique profile of an explosive in a presence of a large...

MGI Code Catalog

Ongoing

The Materials Genome Initiative is fostering the acceleration of the discovery, design, development and deployment of new materials through the creation of a “Materials Innovation Infrastructure”. This infrastructure is comprised of computational tools, experimental tools, and digital data. In order...

A micromechanical bulk acoustic resonator that uses phononic crystal tethers to achieve a quality factor approaching the fundamental dissipation limit (fxQ can be as large as 1.2 x 1013 Hz)

Micro- and Nanoelectromechanical Systems

Completed

MEMS/NEMS are enabling technologies that bring new functionalities with the potential to radically transform markets ranging from consumer products to national defense. The meteoric rise of the smartphone is an excellent example, in which MEMS accelerometers, gyroscopes, microphones, displays, and...

Micro- and nano-optomechanical systems

Ongoing

Our primary current research direction involves the use of fabricated devices with sub-wavelength periodicity (photonic crystals) as optomechanical elements. Such structures enable a rich variety of devices, including mirrors, polarizers, and filters, in a configuration that couples naturally to...

Microbial Cell Quantification Methods – Toward Whole Cell Reference Materials

Ongoing

Bacterial disaggregation as a strategy to improve cell counting ( S. Servetas, S. Da Silva) Counting bacterial cells is challenging enough when they are single, individual cells. It can be further complicated by the various bacterial morphologies (e.g., chains, clusters, etc.), which interfere with...

Microbial Genomic Measurements

Completed

The RM 8375 is a stable and homogeneous material whose intended use is whole genome sequencing quality control and proficiency testing. The genomic DNA is intended to be analyzed in the same way as any other sample a laboratory would analyze extracted DNA, such as through the use of genome assembly...

Figure showing four components of metabolomics with samples and processing

Microbial Metabolomics

Ongoing

Mass spectrometry (MS) and nuclear magnetic resonance (NMR) spectroscopy are widely used and complementary analytical platforms for the characterization, identification, and quantification of a metabolome. MS techniques, typically coupled to chromatography, provide a chemical fingerprint of complex...

Microcalorimeter Spectrometers for X-ray and Gamma-ray Spectroscopy

Ongoing

The Quantum Calorimeters Project in the Quantum Sensors Group develops and applies sensors that detect the energy of single photons or particles. For example, Transition-Edge Sensors (TESs) are able to measure the energy of single x-ray and gamma-ray photons with a precision better than one part per...

Was this page helpful?

NIST Headquarters
-Creating Helpful Incentives to Produce Semiconductors for America (CHIPS)
--CHIPS Program Office
---CHIPS Program Headquarters
----CHIPS Program Headquarters - HQ
----Opportunity & Inclusion Group
---External & Government Affairs Division
----External & Government Affairs – HQ
---Investments Division
----Investments Division – HQ
---Operations Office
----Operations Office – HQ
---Risk Management Division
----Risk Management – HQ
---Strategy, Technology & Policy Division
----Strategy, Technology & Policy – HQ
--CHIPS Research & Development Program Office
---CHIPS Research & Development Program Headquarters Division
----CHIPS Research & Development Program Headquarters – HQ
----Integration & Policy Office
----Outreach & Partnerships Office
---External R&D Partnerships Division
----External R&D Partnerships – HQ
----National Advanced Packaging Manufacturing Program Group
----National Semiconductor Technology Center Group
---Industrial Advisory Committee
----Industrial Advisory Committee – HQ
---Semiconductor Manufacturing Institute Division
----Semiconductor Manufacturing Institute – HQ
---Semiconductor Metrology & Characterization Office
----Semiconductor Metrology & Characterization Office – HQ
-Management Resources
--Management Resources
---Associate Director for Management Resources
----Associate Director for Management Resources - HQ
---Business Operations Office
----Business Analytics Group
----Business Operations Office - HQ
----Customer Relationship Management Group
----Process Engineering Office
----Project Management Office
---Emergency Services Office
----Emergency Management, Preparedness and Coordination Group
----Emergency Services - HQ
----Fire Protection Group
----Security Systems and Access Control Group
---Equal Employment Opportunity and Accessibility Office
----Equal Employment Opportunity and Accessibility - HQ
---NIST Research Library and Museum
----NIST Research Library and Museum - HQ
---Fabrication Technology Office
----Fabrication Technology Office - HQ
--Office of Facilities and Property Management
---Boulder Design and Construction Division
----Boulder Design and Construction - HQ
----Facilities Improvement (Boulder) Group
----Reimbursable Work Group
----Facilities Modernization (Boulder) Group
---Gaithersburg Design and Construction Division
----Facilities Improvement (Gaithersburg) Group
----Reimbursable Work (Gaithersburg) Group
----Facilities Modernization (Gaithersburg) Group
----Gaithersburg Design and Construction - HQ
---Gaithersburg Facility Maintenance Division
----Building Management (Gaithersburg) Group
----Operations Engineering Group
----Gaithersburg Facility Maintenance - HQ
----Operations and Maintenance (Gaithersburg) Group
---Facilities Services Division
----Logistics Group
----Materials Management (Gaithersburg) Group
----Site Services Group
----Facilities Services Division - HQ
---Boulder Facilities Maintenance Division
----Site Support Group
----Boulder Facilities Maintenance- HQ
---Office of Facilities and Property Management
----Capital Asset Management and Facilities Planning Group
----OFPM Program Management Office
----Office of Facilities and Property Management - HQ
----Administrative Operations Group
----Safety, Health and Compliance Group
--Office of Acquisition and Agreements Management
---Office of Acquisition and Agreements Management
----Office of Acquisition and Agreements Management - HQ
---Financial Assistance Agreements Management Office
----Financial Assistance Agreements Management Office – HQ
---Acquisition Management Division
----Acquisition Management - HQ
----Acquisition Operations
----Acquisition Operations
----Acquisition Policy and Reimbursable Agreements
--Office of Information Systems Management
---Applications Systems Division
----Applications Systems - HQ
----Business Systems Group
----Custom Applications Development Group
----Data Management & Business Intelligence Group
----Database & Applications Infrastructure Group
----Drupal Development Group
----Identity & Access Management (IDAM) Group
----Institutional Systems Support Group
----OSHE Web Development Group
----Salesforce Development Group
----ServiceNow Development Group
---Research Services Office
----Lab Automation Group
----Research Services Office - HQ
----Scientific Systems Group
---Service Delivery Excellence Office
----Customer Relationship Management Group
----Project Management Group
----Salesforce DevOps Group
----Service Delivery Excellence Office
----ServiceNow DevOps Group
---Information Technology Security & Networking Division
----A&A Assessment Group
----A&A Infrastructure Group
----Assessment & Accreditation (A&A) Program
----Embedded IT Security Officer Group
----Information Technology Security & Networking - HQ
----Network Security Group
----Networking Group
----Privacy Group
----Security Implementation & Incident Response Group
----Telecommunications Group
---Customer Access and Support Division
----CASD Boulder Site Support Group
----Customer Access and Support - HQ
----Desktop Support Group
----Embedded Support Group A
----Embedded Support Group B
----Managed Endpoint for MAC & Mobile Group
----Managed Endpoint Windows Group
----Service Desk Operations Group
---Infrastructure Services Division
----Compute & Storage Group
----Computer Facilities Group
----Infrastructure Services Division - HQ
----Security & Monitoring Group
----Unix Hosting Group
----Windows Hosting Group
---Office of Information Systems Management
----Office of Information Systems Management - HQ
----Service & Project Management Group
---Platform Services Division
----Authentication & Directory Services Group
----Collaboration Services Group
----Enterprise Cloud Communications Group
----Enterprise Continuous Diagnostics and Monitoring Group
----Platform Management Group
----Platform Services Division - HQ
--Office of Human Resources Management
---Learning and Organizational Development Division
----Learning and Organizational Development – HQ
---Talent Acquisition Division
----Talent Acquisition – HQ
---Workforce Analytics and Technology Division
----Workforce Analytics and Technology – HQ
---Human Resources Management Office
----Human Resources Management Office - HQ
---Workforce Programs Division
----Workforce Programs – HQ
--Office of Safety, Health and Environment
---Fire Protection Authority Division
----Fire Protection Authority – HQ
---Office of Safety, Health and Environment
----Office of Safety, Health and Environment - HQ
---Gaithersburg Safety, Health and Environment Division
----Occupational Health Group
----Occupational Safety Group
----Gaithersburg Safety, Health and Environment - HQ
----Fire and Facilities Safety Group
----Environmental Management Group
---Radiation Safety Division
----Radiation Facilities Group
----Program Development and Compliance Group
----Radiation Safety - HQ
---Boulder Safety, Health and Environment Division
----Boulder Safety, Health and Environment - HQ
--Office of Financial Resource Management
---Financial Systems and Reporting Division
----CBS Core Support Group
----CBS Feeder System Support Group
----Financial Systems and Reporting Division - HQ
----Financial Statements Group
----Data Control Group
----Reconciliations Group
---Office of Financial Resource Management
----Office of Financial Resource Management - HQ
----Internal Controls Management & Evaluation Office
----Enterprise Risk Management Office
---Financial Operations Division
----Travel Group
----Agreements Group
----Accounts Receivable Group
----Financial Operations - HQ
----Accounts Payable Group
---Budget Division
----Technical and Extramural Programs Group
----Institutional Support and Facilities Group
----Budget - HQ
----Formulation and Financial Management Group
-Laboratory Programs
--Communications Technology Laboratory
---RF Technology Division
----High-Speed Waveform Metrology Group
----Superconductive Electronics Group
----Guided Wave Electromagnetics Group
----Electromagnetic Fields Group
----RF Technology Division - HQ
---Smart Connected Systems Division
----IoT Devices and Infrastructures Group
----Networked Control Systems Group
----Smart Connected Manufacturing Systems Group
----Smart Grid Group
----Transformational Networks and Services Group
---Spectrum Technology and Research Division
----Applied Systems Metrology Group
----Fiber Sources and Applications Group
----Shared Spectrum Metrology Group
----Spectrum Technology and Research – HQ
---Wireless Networks Division
----Internet Technologies Research Group
----Radio Access and Propagation Metrology Group
----Wireless Networks Division - HQ
----Wireless Systems Innovation and Performance Group
---Public Safety Communications Research Division
----Public Safety Communications Research Division - HQ
----Advanced Communications Research Group
----Network Operations Group
---Communications Technology Laboratory HQ
----Communications Technology Laboratory HQ Gp
----Boulder Laboratory Director Office
--Engineering Laboratory
---Building Energy and Environment Division
----Building Energy and Environment - HQ
----Mechanical Systems and Controls Group
----Indoor Air Quality and Ventilation Group
----HVAC&R Equipment Performance Group
----Heat Transfer and Alternative Energy Systems Group
---Intelligent Systems Division
----Intelligent Systems - HQ
----Manipulation and Mobility Systems Group
----Cognition and Collaboration Systems Group
----Production Systems Group
----Sensing and Perception Systems Group
---Materials and Structural Systems Division
----Earthquake Engineering Group
----Engineering Research Support Group
----Infrastructure Materials Group
----Community Resilience Group
----Materials and Structural Systems - HQ
----Structures Group
---Engineering Laboratory Office
----Applied Economics Office
----Disaster Impact Reduction Office
----Engineering Laboratory - HQ
----Engineering Laboratory Data, Security, Technology Group
---Fire Research Division
----National Fire Research Laboratory Group
----Wildland Urban Interface Fire Group
----Flammability Reduction Group
----Fire Research - HQ
----Engineered Fire Safety Group
----Fire Fighting Technology Group
---Systems Integration Division
----Life Cycle Engineering Group
----Process Engineering Group
----Information Modeling and Testing Group
----Systems Integration - HQ
--Information Technology Laboratory
---Applied Cybersecurity Division
----Applied Cybersecurity - HQ
----Cybersecurity and Privacy Applications Group
----National Cybersecurity Center of Excellence
----NICE
---Computer Security Division
----Computer Security - HQ
----Cryptographic Technology Group
----Secure Systems and Applications Group
----Security Components and Mechanisms Group
----Security Test, Validation and Measurement Group
----Security Engineering and Risk Management Group
---Applied and Computational Mathematics Division
----Mathematical Software Group
----Mathematical Analysis and Modeling Group
----Quantum Information Group
----High Performance Computing and Visualization Group
----Applied and Computational Mathematics - HQ
---Statistical Engineering Division
----Applied and Computational Statistics Group
----Statistical Design, Analysis, and Modeling Group
----Statistical Engineering - HQ
---Software and Systems Division
----Systems Interoperability Group
----Software Quality Group
----Software and Systems - HQ
----Cyber Infrastructure Group
----Information Systems Group
---Information Access Division
----Information Access - HQ
----Image Group
----Multimodal Information Group
----Retrieval Group
----Visualization and Usability Group
---Information Technology Laboratory Office
----Office of Computational Science for Metrology
----Office of Emerging Technologies
----Office of IT Standardization
----Office of Government and Industrial Liaison
----Information Technology Laboratory Office - HQ
----Office of Chief Cybersecurity Advisor
--Laboratory Programs
---Research Data and Computing Office
----Research Data and Computing Office – HQ
---Research Protections Office
----Research Protections Office - HQ
---Research Security and Safeguarding Science Office
----Research Security and Safeguarding Science - HQ
---Standards Coordination Office
----International Standards Policy and Coordination Group
----Standards and Conformity Assessment Services Group
----Standards Coordination Office - HQ
----National Voluntary Laboratory Accreditation Program (NVLAP)
---Special Programs Office
----Special Programs Office-HQ
---Associate Director for Laboratory Programs
----Associate Director for Laboratory Programs - HQ
--Material Measurement Laboratory
---Office of Reference Materials
----Business and Quality Management Group
----Business Application Development, Support, and Security Group
----Sales and Customer Services Group
----Publication and Web Services Group
----Office of Reference Materials - HQ
----Materials and Physical Services Group
---Office of Data and Informatics
----Office of Data and Informatics - HQ
----Data Services Group
----Data Sciences Group
---Biosystems and Biomaterials Division
----Biomarker and Genomic Sciences Group
----Cellular Engineering Group
----Biomaterials Group
----Complex Microbial Systems Group
----Cell Systems Science Group
----Biosystems and Biomaterials Division - HQ
---Chemical Sciences Division
----Biochemical and Exposure Science Group
----Chemical Informatics Group
----Optical Measurements Group
----Chemical Process and Nuclear Measurements Group
----Gas Sensing Metrology Group
----Inorganic Chemical Metrology Group
----Biospecimen Science Group
----Chemical Sciences Division - HQ
----Organic Chemical Metrology Group
---Biomolecular Measurement Division
----Biomolecular Structure and Function Group
----Mass Spectrometry Data Center Group
----Bioprocess Measurements Group
----Bioanalytical Science Group
----Biomolecular Measurement Division - HQ
----Applied Genetics Group
---Applied Chemicals and Materials Division
----Applied Chemicals and Materials Division - HQ
----Thermodynamics Research Center Group
----Thermophysical Properties of Fluids Group
----Nanoscale Reliability Group
----Fluid Characterization Group
----Fatigue and Fracture Group
---Materials Science and Engineering Division
----Thermodynamics and Kinetics Group
----Polymers Processing Group
----Mechanical Performance Group
----Polymers and Complex Fluids Group
----Materials Science and Engineering Division - HQ
----Functional Polymers Group
----Functional Nanostructured Materials Group
---Materials Measurement Science Division
----Security Technologies Group
----Surface and Trace Chemical Analysis Group
----Nanomechanical Properties Group
----Nano Materials Research Group
----Materials Structure and Data Group
----Microscopy and Microanalysis Research Group
----Synchrotron Science Group
----Materials Measurement Science Division - HQ
----Data and AI-Driven Materials Science Group
---Material Measurement Laboratory Office
----The Material Measurement Laboratory Office of Operations Group
----Material Measurement Laboratory - HQ
----Genome-Scale Measurement Group
--NIST Center for Neutron Research
---NIST Center for Neutron Research
----Research Facility Operations Group
----NIST Center for Neutron Research - HQ
----Reactor Operations and Engineering Group
----Neutron-Condensed Matter Science Group
--Physical Measurement Laboratory
---Microsystems and Nanotechnology Division
----Biophysical and Biomedical Measurement Group
----Microsystems and Nanotechnology - HQ
----Nanostructure Fabrication and Measurement Group
----Photonics and Optomechanics Group
---Time and Frequency Division
----Atomic Devices & Instrumentation Group
----Precision Photonic Synthesis Group
----Quantum & Nonlinear Nanophotonics Group
----Ion Storage Group
----Neutral Atom Optical Clocks Group
----Time Realization and Distribution Group
----Phase Noise Metrology Group
----Time and Frequency - HQ
---Quantum Physics Division
----Quantum Physics - HQ
---Radiation Physics Division
----Dosimetry Group
----Radioactivity Group
----Radiation Physics - HQ
----Neutron Physics Group
---Sensor Science Division
----Fundamental Thermodynamics Group
----Sensor Science - HQ
----Temperature & Humidity Group
----Remote Sensing Group
----Optical Radiation Group
----Fluid Metrology Group
----Surface and Interface Metrology Group
---Applied Physics Division
----Advanced Microwave Photonics Group
----Spin Electronics Group
----Applied Physics - HQ
----Faint Photonics Group
----Quantitative Nanostructure Characterization Group
----Molecular and Bio-Photonics Group
----Magnetic Imaging Group
----Quantum Nanophotonics Group
----Sources and Detectors Group
---Quantum Measurement Division
----Quantum Optics Group
----Mass and Force Group
----Quantum Measurement - HQ
----Laser Cooling and Trapping Group
----Fundamental Electrical Measurements Group
----Applied Electrical Metrology Group
----Atomic Spectroscopy Group
---Quantum Sensors Division
----Device Fabrication Group
----Long Wavelength Sensors and Applications Group
----Quantum Calorimeters Group
----Quantum Electronics Group
----Quantum Sensors – HQ
---Nanoscale Device Characterization Division
----Atom Scale Device Group
----Nanoscale Device Characterization Division - HQ
----Alternative Computing Group
----Nanoscale Spectroscopy Group
----Advanced Electronics Group
----Nanoscale Processes and Measurements Group
---Physical Measurement Laboratory Office
----Boulder Microfabrication Facility
----Physical Measurement Laboratory- HQ
----PML Information Office
----Center for Nanoscale Science and Technology
----Office of Weights and Measures
-Innovation & Industry Services
--Office of Advanced Manufacturing
---Microelectronics Manufacturing Division
----Microelectronics Manufacturing – HQ
----Microelectronics Strategy and Enterprise Group
----Semiconductor Coordination Group
----Semiconductor Operations Group
----Workforce and Equity Development Group
---Office of Advanced Manufacturing
----Office of Advanced Manufacturing - HQ
---Partnerships and Outreach Division
----Communications and Marketing Group
----Education and Workforce Development Group
----Partnership Engagement Group
----Partnerships and Outreach – HQ
----Technology Hubs Development Group
---Program Operations Division
----Competitions Group
----Institute and Program Management Group
----Performance Management Group
----Program Operations - HQ
---Strategy and Planning Division
----Analysis and Benchmarking Group
----Strategic Planning Group
----Strategy and Planning – HQ
--Baldrige Performance Excellence Program
---Baldrige Performance Excellence Program Office
----Award Process Group
----Director's Office, Baldrige Performance Excellence Program
----Administrative Support/Electronic Information Group
----Outreach and Communications Group
----Publications Management Group
----Workforce Development Group
--Innovation & Industry Services
---Associate Director for Innovation & Industry Services
----Associate Director for Innovation & Industry Services - HQ
---Technology Partnerships Office
----Technology Partnerships Office - HQ
--Hollings Manufacturing Extension Partnership Program
---National Platforms Division
----National Platforms – HQ
----Network Knowledge Management Group
----Supply Chain Group
---National Programs Division
----National Programs- HQ
---Outreach and External Affairs Division
----Outreach and External Affairs – HQ
---Performance Evaluation and Economic Impacts Division
----Performance Evaluation and Economic Impacts - HQ
----Performance Metrics and Evaluation Group
---Network Agreements Management Division
----Network Agreements Management - HQ
----Node B Group
----Node A Group
---Internal Operations Division
----Internal Operations – HQ
---Hollings Manufacturing Extension Partnership Program Office
----Hollings Manufacturing Extension Partnership Program - HQ
-Director's Office
--Director's Office
---Ombuds Office
----Ombuds Office - HQ
---Public Affairs Office
----Media Liaison Group
----Video and Digital Media Production Group
----Public Affairs Office - HQ
----Internal Communications and Inquiries Group
----Conference Program and Audiovisual Services Group
----Boulder Meetings Support and Services Group
----Web Content Development Group
---Program Coordination Office
----Program Coordination Office - HQ
---Director's Office
----Director's Office - HQ
---Congressional and Legislative Affairs Office
----Congressional and Legislative Affairs Office - HQ
---Management and Organization Office
----Management and Organization Office- HQ
---International and Academic Affairs Office
----International and Academic Affairs Office - HQ

Advanced communications
-Open Radio Access Network (Open-RAN)
-Quantum communications
-Spectrum sharing
-Wireless (RF)
Artificial intelligence
-AI measurement and evaluation
-Autonomous systems
--Automated vehicles
--Autonomous laboratories
-Applied AI
-Fundamental AI
-Hardware for AI
-Machine learning
-Trustworthy and responsible AI
Bioscience
-Bioeconomy
--Biological data
-Bioimaging
-Bioinformatics
-Biomanufacturing
-Biomaterials
-Biometrology
-Biosecurity
--Biosurveillance
--Genomic cybersecurity
--Nucleic acid sequence screening
-Cell measurements
-Engineering / synthetic biology
--Biofabrication
--Cell-free systems
--Genome engineering
--Protein engineering
-Gene delivery systems
-Genome editing
-Genomics
-Glycomics
-Metabolomics
-Microbial measurements
-Proteomics
Buildings and Construction
-Building codes and standards
-Building control systems
-Building damage and repair
-Building economics
-Building materials
-Energy efficiency
-Heating, ventilation and air conditioning equipment
-Indoor air quality
-Structural engineering
-Thermal comfort
Chemistry
-Analytical chemistry
-Chemical engineering and processing
-Chemical thermodynamics and chemical properties
-Molecular characterization
-Theoretical chemistry and modeling
-Thermochemical properties
Electronics
-Electromagnetics
-Flexible electronics
-Magnetoelectronics
-Optoelectronics
-Organic electronics
-Semiconductors
-Sensors
-Superconducting electronics
Energy
-Alternative energy
-Conventional energy
-Electric power / smart grid
-Fuels
Environment
-Air / water / soil quality
-Climate Measurements
-Environmental health
-Greenhouse gas measurements
-Marine science
-Sustainability
Fire
-Fire detection
-Fire dynamics and science
-Fire fighting
-Fire modeling
-Fire risk reduction
-Materials flammability
-Structural fire resistance
-Wildland urban interface fire
Forensic Science
-Digital evidence
-Drugs and toxicology
-Firearms and toolmarks
-Forensic biometrics
-Forensic genetics
-Trace evidence
Health
-Biopharmaceuticals
-Cell and gene therapy
-Clinical diagnostics
--Cancer
--Medical imaging
-Food and nutrition
-Human microbiome
-Precision medicine
-Regenerative medicine and advanced therapy
--Flow cytometry
Information technology
-Biometrics
-Cloud computing and virtualization
-Complex systems
-Computational science
-Conformance testing
-Cyber-physical systems
--Smart cities
-Cybersecurity and privacy
--Cryptography
--Cybersecurity education and workforce development
--Cybersecurity measurement
--Identity and access management
--Privacy engineering
--Risk management
--Securing emerging technologies
--Trustworthy networks
--Trustworthy platforms
-Data and informatics
--Human language technology
--Information retrieval
--Natural language processing
-Digital twins
-Federal information processing standards (FIPS)
-Health IT
-Internet of Things (IoT)
-Interoperability testing
-Location based services
-Mobile
-Networking
--Mobile and wireless networking
--Network management and monitoring
--Network modeling and analysis
--Network security and robustness
--Network test and measurement
--Next generation networks
--Protocol design and standardization
--Software defined and virtual networks
-Software research
--Software testing
-Usability and human factors
--Accessibility
-Video analytics
-Virtual / augmented reality
-Visualization research
-Voting systems
Infrastructure
Manufacturing
-Additive manufacturing
-Factory communications
-Factory operations planning and control
-Interoperability in manufacturing
-Machining
-Manufacturing economics
-Manufacturing quality assurance
-Manufacturing systems design and analysis
-Monitoring, diagnostics and prognostics
-Process improvement
-Process measurement and control
-Product data
-Robotics
--Agility and adaptability
--Collaborative robots
--Dexterous grasping
--Manipulation
--Mobility and industrial autonomous vehicles
--Navigation / actuation / control
--Sensing and perception
-Supply chain
-Sustainable manufacturing
-Systems engineering
-Systems integration
-Technology commercialization
Materials
-Ceramics
-Composites
-Concrete / cement
-Materials characterization
--Composition and structure
--Mechanical properties
--Thermal properties
-Metals
-Modeling and computational material science
-Polymers
-Superconductors
Mathematics and statistics
-Experiment design
-Image and signal processing
-Modeling and simulation research
-Numerical methods and software
-Statistical analysis
-Uncertainty quantification
Metrology
-Amount of substance
-Dimensional metrology
-Electrical / electromagnetic metrology
-Flow metrology and rheology
-Force metrology
-Humidity metrology
-Ionizing radiation metrology
-Mass metrology
-Metric
-Optical / photometry / laser metrology
-Pressure and vacuum metrology
-Thermometry metrology
-Time and frequency metrology
-Weights and measures
Nanotechnology
-Nanobiotechnology
-Nanochemistry
-Nanoelectronics
-Nanofabrication / manufacturing
--Lithography
--Self-assembly
-Nanofluidics
-Nanomagnetics
-Nanomaterials
-Nanomechanics
-Nanometrology
-Nanophotonics
-Nanophysics
-Nanoplasmonics
Neutron research
Performance excellence
-Assessment tools and services
-Baldrige award
-Baldrige examiners
-Baldrige Framework and Criteria
-Best practices
-Leadership development
Physics
-Atomic / molecular / quantum
-Biological physics
-Condensed matter
-Electron physics
-Magnetics
-Nuclear physics
-Optical physics and communications
-Quantum information science
-Radiation
-Spectroscopy
-Thermodynamics
-Time and frequency
Public safety
-Chemical / Biological / Radiological / Nuclear / Explosives (CBRNE)
-First responder preparedness
-Law enforcement
-Public safety communications research
-Response robots
Resilience
-Community resilience
--Recovery
--Resilience metrics
-Disaster and failure studies
-Earthquake risk reduction
-Resilience economics
-Resilient materials
-Windstorm impact reduction
Standards
-Accreditation
-Calibration services
-Conformity assessment
-Documentary standards
-Frameworks
-Quality assurance
-Reference data
-Reference instruments
-Reference materials
-Standards education
Technology transfer
Transportation
-Aerospace
-Automotive