NOTICE: Due to a lapse in annual appropriations, most of this website is not being updated. Learn more.

Form submissions will still be accepted but will not receive responses at this time. Sections of this site for programs using non-appropriated funds (such as NVLAP) or those that are excepted from the shutdown (such as CHIPS and NVD) will continue to be updated.

U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Search Publications

NIST Authors in Bold

Displaying 126 - 150 of 1580

G-band Reflectivity Results of Conical Blackbody for Radiometer Calibration

January 14, 2018
Author(s)
Derek A. Houtz, Dazhen Gu
Two hollow conical cavities have been developed and built for the National Institute of Standards and Technology (NIST) for use as radiometric brightness temperature sources, or blackbodies. According to Kirchoff's reciprocity relation, a good absorber is

On the Susceptibility of Coded OFDM to Interference: A Simulation Study

January 3, 2018
Author(s)
Jason Coder, Yao Ma
The susceptibility of broadband wireless communications signals (e.g., LTE, IEEE 802.11) to interference has been a topic of significant research. In this paper, we implement a simulation-based study on the impact interference can have on the bit error

The Multi-Robot Large Antenna Positioning System for Over-The-Air Testing at the National Institute of Standards and Technology1

December 31, 2017
Author(s)
David R. Novotny, Josh Gordon, Michael S. Allman, Jeffrey R. Guerrieri, Alexandra Curtin, Kim Hassett, George McAdams, Quang Ton
To address dynamic testing requirements of new communications systems and RF processes that use non-static beam forming, NIST proposed the Large Antenna Positioning System (LAPS). The LAPS consists of two kinematically-linked six axis robotic arms, one of

Hybrid Characterization of Nanolitre Dielectric Fluids in a Single Microfluidic Channel up to 110 GHz Song

December 1, 2017
Author(s)
Nathan D. Orloff, Song Liu, James C. Booth, Dylan F. Williams, Dominec Schreurs, Bart Nauwelaers, Iija Oclet, Charles A. Little
In this work, we present a new “hybrid” method for dielectric measurements of nanolitre fluid samples on-wafer. The first part of the hybrid method is a technique which extracts the 4 complex permittivity of the microfluidic channel wall material. The

Characterization of Transmission Lines with Nonlinear Dielectric Materials

November 28, 2017
Author(s)
Aaron M. Hagerstrom, Christian J. Long, Nathan D. Orloff, James C. Booth, Eric J. Marksz
Nonlinear transmission lines are interesting for two broad reasons: first, they have several direct device applications (i.e. harmonic generation, and phase shifters), and second, they provide a way to characterize nonlinear materials at mm-wave

Establishing Traceability for SOLT Calibration Kits*

November 28, 2017
Author(s)
Ronald A. Ginley
Establishing traceability for a measurement is very important so that the results of the measurement can be used in a common framework for comparisons and understanding. The standard source of traceability for Short-Open-Load-Thru (SOLT) calibrations has

Rydberg Atom Electric-Field Metrology

November 28, 2017
Author(s)
Joshua A. Gordon, Christopher L. Holloway, Matthew T. Simons
We present a technique which shows great promise for realizing an atomic standard measurement of RF fields that is intrinsically calibrated, directly linked to the SI and atomic structural constants. This technique relies on the reponse of Rydberg atoms to

Kicking the Tires of the NIST Microwave Uncertainty Framework Part 2*

November 27, 2017
Author(s)
Ronald A. Ginley
Traceability of a measurement requires two parts. An unbroken chain of measurements and uncertainties for each link of the chain. The NIST Microwave Uncertainty Framework (MUF) can provide both the required parts for a single link in the chain or for

Development of A New Atom-Based SI Traceable Electric-Field Metrology Technique

October 18, 2017
Author(s)
Christopher L. Holloway, Matthew T. Simons, Joshua A. Gordon
We are developing a fundamentally new atom-based approach for Electric (E) metrology. This technique has the capability of becoming a new international standard for E-field measurements and calibrations. Since this new approach is based on atomic

Submillimeter Wavelength Scattering from Random Rough Surfaces

August 9, 2017
Author(s)
Erich N. Grossman, Richard A. Chamberlin, David R. Novotny, Joshua A. Gordon, Nina P. Basta
We describe bistatic scattering measurements on eight reference targets constructed from Al 2O 3 grit of various sizes embedded in an absorptive epoxy matrix. These samples' surface topographies were measured using focus-variation microscopy, and their

Efficient Rectangular Waveguide to Stripline Transition in D Band

August 7, 2017
Author(s)
Dazhen Gu, Xifeng Lu, Ronald A. Ginley
We present a waveguide-to-stripline transition for a full {\it D}-band operation from 110 GHz to 170 GHz. An E-plane probe in parallel with waveguide main axis is configured to effectively couple the signal in the primary $\text{TE}_{10}$ mode from the

3.5 GHz Radar Waveform Capture at Fort Story

August 4, 2017
Author(s)
Paul D. Hale, Jeffrey A. Jargon, Peter J. Jeavons, Michael R. Souryal, Adam J. Wunderlich, Mark Lofquist
We describe measurements to create a library of high-fidelity waveforms of federal incumbent radar signals currently operating in the 3550 MHz – 3650 MHz (“3.5 GHz”) band. In this second phase of assembling the library, measurements were collected at Fort

Atom-based RF electric field metrology above 100 GHz

July 16, 2017
Author(s)
Christopher L. Holloway, Matthew T. Simons, Joshua A. Gordon
While atom-based radio-frequency (RF) electric field probes have the potential to improve electric field measurements for a broad range of frequencies (from a few GHz to 100s of GHz) and field strengths (mV/m to kV/m), extending the measurement

Equivalent Isotropic Response as a Surrogate for Incident Field Strength

July 9, 2017
Author(s)
Dan Kuester, Duncan McGillivray, William F. Young, John M. Ladbury, Ari Feldman, Adam Wunderlich, Sheryl M. Genco
The strength of a radiated field at some location in free space can be described in terms of the equivalent conducted output from an isotropic probe antenna with a specified reference polarization. This metric has already entered use by various standards

A Review of the IEEE 1785 Standards for Rectangular Waveguides above 110 GHz

June 6, 2017
Author(s)
Ronald A. Ginley, Nick M. Ridler
A new series of standards has recently been published by IEEE defining waveguide for use at millimeter-wave and terahertz frequencies. The series comprises three standards covering different aspects of this technology: (i) frequency bands and waveguide

Comprehensive circuit model of auto-limiting superconductor devices and systems

May 31, 2017
Author(s)
Jordi Mateu, C Collado, A Hueltes, D Garcia-Pastor, R Perera, Nikhil M. Joshi, Xifeng Lu, Nate Orloff, Jim Booth
This paper presents a phenomenological equivalent circuit to model the phenomenon occurring when a section of superconducting transmission line transits from the superconductor to the normal state. This phenomenon allows the use of superconductors for the

Electric field metrology for SI traceability: Systematic measurement uncertainties in electromagnetically induced transparency in atomic vapor

May 24, 2017
Author(s)
Christopher L. Holloway, Matthew T. Simons, Joshua A. Gordon, Georg Raithel, dave Anderson
We investigate the relationship between the Rabi frequency ($\Ω_{RF}$, related to the applied electric field) and Autler-Townes (AT) splitting, when performing atom-based radio- frequency (RF) electric (E) field strength measurements using Rydberg states

3-Port Frequency Selective Absorptive Limiter

May 1, 2017
Author(s)
A Hueltes, Eduard Rocas, Carlos Collado, Jordi Mateu, D Garcia-Pastor, James Booth, Rafael P. Robles
This paper proposes a novel 3-port absorptive limiter for frequency selective circuits based on a similar configuration than a conventional 90º hybrid coupler. This circuit uses the switching features existing in common diode devices to changes between the
Displaying 126 - 150 of 1580
Was this page helpful?