NOTICE: Due to a lapse in annual appropriations, most of this website is not being updated. Learn more.
Form submissions will still be accepted but will not receive responses at this time. Sections of this site for programs using non-appropriated funds (such as NVLAP) or those that are excepted from the shutdown (such as CHIPS and NVD) will continue to be updated.
An official website of the United States government
Here’s how you know
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
We analyze several pulse-height analysis schemes aimed at realizing maximum precision with TES (transition-edge sensor) microcalorimeter x-ray detectors. Issues of concern are nonstationary noise when the pulse takes the TES element into a higher
Benedikt Hampel, Daniel Slichter, Dietrich Leibfried, Richard Mirin, Sae Woo Nam, Varun Verma
State readout of trapped-ion qubits with trap-integrated detectors can address important challenges for scalable quantum computing, but the strong radio frequency (rf) electric fields used for trapping can impact detector performance. Here, we report on
Malcolm Durkin, Scott Backhaus, Simon Bandler, James Chervenak, Ed Denison, W.Bertrand (Randy) Doriese, Johnathon Gard, Gene C. Hilton, Richard Lew, Tammy Lucas, Carl D. Reintsema, Dan Schmidt, Stephen Smith, Joel Ullom, Leila R. Vale, Michael Vissers, Nicholas Wakeham
Time-division multiplexing (TDM) of transition-edge-sensor (TES) microcalorimeters is being developed as the readout tech-nology for the Athena X-ray integral field unit (X-IFU) and is under consideration for future TES-bolometer missions like CMB-S4. We
David Olaya, John Biesecker, Manuel Castellanos Beltran, Adam Sirois, Paul Dresselhaus, Samuel P. Benz, Pete Hopkins, Logan Howe
We demonstrate Josephson arbitrary waveform synthesizers (JAWS) with increased operating temperature range for temperatures below 4 K. These JAWS synthesizers were fabricated with externally-shunted Nb/a-Si/Nb junctions whose critical current exhibits
Elyse McEntee Wei, Richard Chamberlin, Nate Kilmer, Joshua Kast, Jake A. Connors, Dylan Williams
We describe a system for performing on-wafer vector-network-analyzer measurements from 100 MHz to 15 GHz at mK temperatures (i.e., less than 20 mK). We first demonstrate a camera-less probe positioning system and calibrate this system at 4.4 K. We then use
Dimitrios Georgakopoulos, Ilya Budovsky, Samuel P. Benz
Josephson voltage standards (JVSs) provide a primary realization of the volt, the unit of electromotive force. They generate direct (dc) voltages up to 10 V and show agreement better than 1 nV/V at 10 V. For JVSs based on the sinusoidal [or continuous-wave
Saeed Khan, Bryce Primavera, Jeff Chiles, Adam McCaughan, Sonia Buckley, Alexander Tait, Adriana Lita, John Biesecker, Anna Fox, David Olaya, Richard Mirin, Sae Woo Nam, Jeff Shainline
Superconducting optoelectronic hardware is being explored as a path towards artificial spiking neural networks with unprecedented scales of complexity and computational ability. Such hardware combines integrated-photonic components for few-photon, light
Ryan DeCrescent, Zixuan Wang, Poolad Imany, Robert Boutelle, Corey McDonald, Travis Autry, John Teufel, Sae Woo Nam, Richard Mirin
Surface acoustic waves (SAWs) coupled to quantum dots (QDs), trapped atoms and ions, and point defects have been proposed as quantum transduction platforms, yet the requisite coupling rates and cavity lifetimes have not been experimentally established
Siyuan Zhang, Hsun-Jen Chuang, SON LE, Curt A. Richter, Kathleen McCreary, Berend Jonker, Angela R. Hight Walker, Christina Hacker
The development of processes to controllably dope two-dimensional semiconductors is critical to achieving next generation electronic and optoelectronic devices. Understanding the nature of the contacts is a critical step for realizing efficient charge
Adriana Lita, Dileep Reddy, Varun Verma, Richard Mirin, Sae Woo Nam
Single-photon detectors based on superconducting thin films have become a viable class of technologies for widespread usage in quantum optics. In this tutorial paper we introduce the key performance metrics required of them for quantum information
Near the end of the 20th century, there was renewed excitement about the potential appli- cations of a type of superconducting detector known as the transition-edge sensor (TES). In the intervening decades there has been a paradigm shift from TESs as a
In recent years, interesting materials have emerged which are only available as µm-scale flakes, and whose novel physics might be better understood through broadband microwave spectroscopy; examples include twisted bilayer graphene [1], 2D materials in
Michael Schneider, Emily Toomey, Graham Rowlands, Jeff Shainline, Paul Tschirhart, Ken Segall
Neuromorphic computing is a broad eld that uses biological inspiration to address computing design. It is being pursued in many hardware technologies both novel and conventional. Here we discuss the use of superconductive electronics for neuromorphic
Logan Howe, Manuel Castellanos Beltran, Adam Sirois, David Olaya, John Biesecker, Paul Dresselhaus, Samuel P. Benz, Pete Hopkins
Scaling of quantum computers to fault-tolerant levels relies critically on the integration of energy-efficient, stable, and reproducible qubit control and readout electronics. In comparison to traditional semiconductor-control electronics (TSCE) located at
Maximilian Protte, Varun Verma, Jan Philipp Hopker, Richard Mirin, Sae Woo Nam, Tim Bartley
In this paper, we demonstrate our results on micron-wide tungsten silicide superconducting nanowire single-photon detectors fabricated by laser lithography. Laser-lithographically written devices allow for fast and easy structuring of large areas while
Jordan Wheeler, Michael Vissers, Maxime Malnou, Johannes Hubmayr, Joel Ullom, Jiansong Gao
The design, implementation, and sensitivity of a new microwave multiplexable superconducting resonator thermometer based on two-level-systems are presented. The thermometer operates from 1 K to 50 mK and has the potential to measure down to 5 mK. The
Alirio De Jesus Soares Boaventura, Justus Brevik, Dylan Williams, Nathan Flowers-Jacobs, Manuel Castellanos Beltran, Anna Fox, Pete Hopkins, Paul Dresselhaus, Samuel P. Benz
We are developing a new instrument, the RF Josephson arbitrary waveform synthesizer (RF-JAWS), for communications metrology and quantum information applications. An important aspect of the RF-JAWS design is the accurate and traceable characterization of
Paul Szypryt, Douglas Bennett, William J. Boone, Amber L. Dagel, G Dalton, William Doriese, Malcolm Durkin, Joseph Fowler, Edward Garboczi, Jonathon D. Gard, Gene Hilton, Jozsef Imrek, E S. Jimenez, Vincent Y. Kotsubo, K Larson, Zachary H. Levine, John Mates, D McArthur, Kelsey Morgan, Nathan J. Nakamura, Galen O'Neil, Nathan Ortiz, Christine G. Pappas, Carl Reintsema, Dan Schmidt, Daniel Swetz, K R. Thompson, Joel Ullom, C Walker, Joel C. Weber, Abigail Wessels, J W. Wheeler
Feature sizes in integrated circuits have decreased substantially over time, and it has become increasingly difficult to three-dimensionally image these complex circuits after fabrication. This can be important for process development, defect analysis, and
Varun Verma, Richard Mirin, Sae Woo Nam, Jan P. Hoepker, Maximilian Protte, Raimund Ricken, Victor Quiring, Christof Eigner, Christine Silberhorn, Tim J. Bartley
We demonstrate the integration of amorphous tungsten silicide superconducting nanowire single- photon detectors on titanium in-diffused lithium niobate waveguides. We show proof-of-principle detection of evanescently-coupled photons of wavelength 1550nm
Haozhi Wang, Suren Singh, Corey Rae McRae, Joseph C. Bardin, S.-X. Lin, A. R. Castelli, Y. J. Rosen, David P. Pappas, J. Y. Mutus
Superconducting circuit testing and materials loss characterization requires robust and reliable methods for the extraction of internal and coupling quality factors of microwave resonators. A common method, imposed by limitations on the device design or
Abigail Wessels, Kelsey Morgan, Daniel Becker, Johnathon Gard, Gene C. Hilton, John Mates, Carl Reintsema, Daniel Schmidt, Daniel Swetz, Joel Ullom, Leila Vale, Douglas Bennett
Transition-Edge Sensors (TESs) are two-dimensional superconducting films used to detect energy or power. These detectors are voltage biased in the superconducting transition where the film resistance is both finite and a strong function of temperature
To design and construct hardware for general intelligence, we must consider principles of both neuroscience and very-large-scale integration. For large neural systems capable of general intelligence, the attributes of photonics for communication and
Florent Lecocq, Franklyn Quinlan, Katarina Cicak, Joe Aumentado, Scott Diddams, John Teufel
Delivering on the revolutionary promise of a universal quantum computer will require processors with millions of quantum bits (qubits). In superconducting quantum processors, each qubit is individually addressed with microwave signal lines that connect
Malcolm Durkin, Joseph S. Adams, Simon Bandler, James A. Chervenak, Ed Denison, William Doriese, Shannon Duff, Fred M. Finkbeiner, Joseph Fowler, Johnathon Gard, Gene C. Hilton, Ruslan Hummatov, Kent Irwin, Young I. Joe, Richard L. Kelley, Caroline A. Kilbourne, Antoine R. Miniussi, Kelsey Morgan, Galen O'Neil, Christine Pappas, Frederick S. Porter, Carl Reintsema, Kazuhiro Sakai, Stephen J. Smith, Robert W. Stevens, Daniel Swetz, Paul Szypryt, Joel Ullom, Leila Vale, Nicholas A. Wakeham
Time division multiplexing (TDM) is being developed as the readout technology of the X-ray integral field unit (X-IFU), a 3,168-pixel X-ray transition-edge sensor (TES) imaging spectrometer that is part of the European Space Agency's Athena satellite