Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Gaithersburg

Identity and Access Management Projects

EU-U.S. TTC Digital Identity Mapping Exercise Report Collaborative Research on Digital Identity in Public Benefits Delivery NIST Special...

Dynamic Mechanical Metrology Publications and Patents

Optical Characterization of Parasitic Motion in a Long-Stroke Shaker Dynamic Calibration of Instrumented Charpy Strikers Progress Towards...

5628 Balance and Scale Calibration and Uncertainties - IAAO Participants Only - CANCELLED

Mon, Jul 13 - Thu, Jul 16 2020

NIST is closely monitoring guidance from Federal, State, and local health authorities on the outbreak of COVID-19. To

An In-Depth Look into Intellectual Property: Part Two

January 21, 2020

Identify NIST Intellectual Property A foundational step in the NIST intellectual property (IP) strategy is to identify the IP developed from NIST’s research and...

2020 Baldrige Examiner Training Experience (Cancelled)

January 22, 2020

The Baldrige Performance Excellence Program is offering a limited number of seats in its 2020 examiner training course for a fee through its Baldrige Examiner...

ACMD Seminar: Modeling Chemical Separations in All-Silica Zeolite Crystals and Spiral-Wound Membrane Modules

Robert DeJaco Department of Chemistry and Chemical Theory Center, University of Minnesota Friday, February 21, 2020, 3:00–4:00 PM Building...

Seeking Input on the Baldrige Excellence Framework

January 21, 2020

What are the top strategic and competitiveness challenges you are facing in your organization or sector (or seeing in the organizations you work with)? What are...

Applied Category Theory Workshop (POSTPONED)

The focus of this workshop in on fostering the development of tooling and use-cases supporting the applied category

ACMD Seminar: Subspace-based parameter dimension reduction and manifold extensions

Zachary Grey Applied and Computational Mathematics Division, ITL, NIST Tuesday, March 3, 2020, 3:00–4:00 PM Building 101, Lecture Room B...

TGDC Subcommittee Work - Historical Meetings - HFP Meetings - 2007

Technical Guidelines Development Committee (TGDC) Human Factors and Privacy Subcommittee (HFP)* August 10, 2007 Draft Minutes AGENDA 1...

TGDC Subcommittee Work - Historical Meetings - HFP Meetings - 2006

HFP Subcommittee Teleconference Friday, November 17, 2006, 11:00 AM ET Agenda: 0. TGDC and EAC updates from Allan -- John Wack 1. Agenda for...

TGDC Subcommittee Work - Historical Meetings - CRT Meetings - 2006

CRT Teleconference November 30, 2006, 11:00 a.m. EDT Agenda 1) Administrative updates (Allan E.) 2) Proposed agenda for the December 4-5...

Kibble Dynamic Force Standards

The Kibble principle provides SI-traceable force determination from measurements of current, voltage and velocity. We are developing...

Glycan Standard Reference Materials

Impact Force Standard

The NIST Impact force standard performs impact calibration of instrumented hammers and other force transducers. It is based on...

Sinusoidal Force Standard

The NIST 2 kHz force standard provides SI-traceable dynamic force excitation at frequencies up to 2 kHz with expanded uncertainties in the 1...

Dynamic Calibration of Instrumented Charpy Strikers

The Charpy impact test is an experimental test used worldwide for characterizing the notch toughness of metals, and thereby their...

Vibration Calibration of Accelerometers

Calibrations at frequencies from as low as 0.1 Hz to greater than 20 kHz Sensitivity and phase Calibration service currently available from...

Acoustic Anechoic Chamber

Acoustical measurements under free-field conditions; chamber is designed to provide a highly anechoic sound field and a very small ambient...

2020 Advancing Cybersecurity Risk Management Conference FAQs

What are the registration fees for the conference? Will web conferencing be available? Will any of the sessions be recorded and accessible...

Dynamic Mechanical Metrology: Acceleration, Force, and Acoustics

The Dynamic Mechanical Metrology Project develops methods to provide accuracy in, and provides calibration services for, acoustic, vibration, acceleration, and

5631 Fundamentals of Metrology - IAAO Participants Only

Mon, Jul 20 - Fri, Jul 24 2020

The 5 day Fundamentals of Metrology seminar introduces participants to the concepts of measurement systems, units

Facial Recognition Technology (Part III): Ensuring Commercial Transparency & Accuracy

January 15, 2020

Introduction Chairwoman Maloney, Ranking Member Jordan, and Members of the Committee, I am Chuck Romine, Director of the Information Technology Laboratory (ITL)...

Industries of the Future

January 15, 2020

Introduction Chairman Wicker, Ranking Member Cantwell, and members of the Committee thank you for the opportunity to testify today before the Senate Committee...

NIST Requesting Information to Upgrade the iEdison System

January 15, 2020

The National Institute of Standards and Technology (NIST) plans to begin modernizing the Interagency Edison System (iEdison) by using feedback and insights from...

TGDC Subcommittee Work - Historical Meetings - CRT Meetings - 2007

Joint CRT and STS Teleconference Thursday, June 28, 2007 11:00 a.m. EDT Draft Meeting Minutes Agenda: 1) Administrative updates and...

TGDC Subcommittee Work - Historical Meetings - STS Meetings - 2006

Security and Transparency Subcommittee (STS) Conference Call November 28, 2006 Agenda: 1) Administrative Updates 2) Preview/Review of draft...

Better Control Over 3D Printing

What's going on in that printing machine? For surgical repairs to a patient’s hip or skull, surgeons might use a titanium bone implant...

NIST Privacy Framework Webinar: Ready, Set, Adopt Version 1.0

Wed, Jan 29 2020, 1:00 - 3:00pm EST

This webinar provides an in-depth review of the NIST Privacy Framework: A Tool for Improving Privacy through Enterprise

Paul Witherell Receives ASME 2016-2017 Early Career Leadership Intern Program to Serve Engineering

Accepted into the American Society of Mechanical Engineer’s (ASME) 2016-2017 Early Career Leadership Intern Program to Serve Engineering – ECLIPSE – program. ECLIPSE is an exclusive professional development opportunity for early career members who...

Was this page helpful?