Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

NIST Pubs

November 2010 SRM Spotlight

November 16, 2010

Author(s)

Regina R. Montgomery

The SRM Spotlight is a newsletter published by the Measurement Services Division for users of NIST standard reference materials. The Spotlight announces new

(NISTIR 7742) Customized Common Industry Format Template for Electronic Health Record Usability Testing

November 16, 2010

Author(s)

Robert M. Schumacher, Svetlana Z. Lowry

This document provides a template for the modified version of Software engineering Software product Quality Requirements and Evaluation(SQuaRE) Common Industry

Direct Determination of Phases in Portland Cements by Quantitative X-Ray Powder Diffraction

November 15, 2010

Author(s)

Paul E. Stutzman

The transformation of chemical analyses to phase estimates via the Bogue calculations has been successfully used by industry for the past 70 years. Since its

Evaluation of the FEMA P-695 Methodology for Quantification of Building Seismic Performance Factors

November 15, 2010

Author(s)

Charles Kircher, Gregory Deierlein, John Hooper, Helmut Krawinkler, Steve Mahin, Benson Shing, John Wallace

This work was an extension of work conducted under the ATC-63 Project, funded by the Federal Emergency Management Agency (FEMA), which resulted in the

Numerical Simulation of Along-Wind Loading on Small Structures Using a Simplified Wind Flow Model

November 10, 2010

Author(s)

Dong Hun Yeo

Aerodynamic measurements of wind-induced pressures on structures are required for the codifi-cation of design wind loads. However, the reliable measurement of

2010 Programs of the Manufacturing Engineering Laboratory

November 5, 2010

Author(s)

Lisa J. Fronczek, Bessmarie A. Young

The National Institute of Standards and Technology s Manufacturing Engineering Laboratory (MEL) promotes innovation and the competitiveness of U.S

Alarm Information for Decision Support

November 4, 2010

Author(s)

William D. Davis, Adam M. Barowy, Stephen Kerber

Experiments conducted in a Toledo Ohio school are used to examine the use of signals from simulated heat detectors by incident command. Two approaches are

Workflow and Electronic Health Records in Small Medical Practices

November 4, 2010

Author(s)

Mala Ramaiah, Eswaran Subrahmanian, Ram D. Sriram, Bettijoyce B. Lide

The NIST 66 m Ball Range A One Dimensional Artifact to test Three Dimensional Imaging Systems

November 3, 2010

Author(s)

Bruce R. Borchardt, Craig M. Shakarji

NIST (the National Institute of Standards and Technology) has instituted a 66 m long range for testing of distance-measuring systems. The range consists of

Open Monte Carlo Engine User Manual

November 3, 2010

Author(s)

Ruediger Kessel

An Optical Frequency Comb Tied to GPS for Laser Frequency/Wavelength Calibration

November 1, 2010

Author(s)

Jack A. Stone Jr., Patrick F. Egan

Optical frequency combs can be employed over a broad spectral range to calibrate laser frequency or vacuum wavelength. This article describes procedures and

Optical fiber power meter comparison between NIST and NIM

November 1, 2010

Author(s)

Igor Vayshenker, Jian Li, L. M. Xiong, Z. X. Zhang, David J. Livigni, Xiaoyu X. Li, John H. Lehman

We describe the results of a comparison of reference standards between the National Institute of Standards and Technology (NIST-USA) and National Institute of

A Review of Building Evacuation Models, 2nd Edition

November 1, 2010

Author(s)

Erica D. Kuligowski, Richard D. Peacock, Bryan L. Hoskins

Evacuation calculations are increasingly becoming a part of performance-based analyses to assess the level of life safety provided in buildings. In some cases

Measuring Scale Errors in a Laser Tracker s Horizontal Angle Encoder through Simple Length Measurement and Two-face System Tests

November 1, 2010

Author(s)

Balasubramanian Muralikrishnan, Christopher J. Blackburn, Daniel S. Sawyer, Steven D. Phillips, Robert Bridges, Quan Ma

We describe a method to estimate the scale errors in the horizontal angle encoder of a laser tracker in this paper. The method does not require expensive

An Application of Combinatorial Methods to Conformance Testing for Document Object Model Events

November 1, 2010

Author(s)

Carmelo Montanez-Rivera, D. Richard Kuhn, Mary C. Brady, Richard M. Rivello, Jenise Reyes Rodriguez, Michael K. Powers

This report describes the use of combinatorial test methods to reduce the cost of testing for the Document Object Model Events standard while maintaining an

Evaluation of the Propensity of Niobium to Absorb Hydrogen During Fabrication of Superconducting Radio Frequency Cavities for Particle Accelerators

October 31, 2010

Author(s)

Richard E. Ricker, Ganapati R. Myneni

During the fabrication of niobium superconducting radio frequency (SRF) particle accelerator cavities procedures are used that chemically or mechanically remove

The use of filtered photodetectors for radiance measurement

October 31, 2010

Author(s)

Albert C. Parr, B. Carol Johnson

A methodology for using a calibrated filter radiometer to measure and monitor the spectral radiance of calibration sources is described. An example using a

Analysis of Pipeline Steel Corrosion Data From NBS (NIST) Studies Conducted Between 1922-1940 and Relevance to Pipeline Management

October 29, 2010

Author(s)

Richard E. Ricker

Between 1922 and 1940, the National Bureau of Standards (NBS) conducted a study into the corrosion of bare steel and wrought iron pipes buried underground at 47

A Machining and Measurement Process Planning Activity Model for Manufacturing System Interoperability Analysis

October 29, 2010

Author(s)

Fiona Zhao, Frederick M. Proctor, John A. Horst

Manufacturing systems consist of many activities. Each of these activities may include one or more software and hardware. In order to make these software and

Technical Study of the Sofa Super Store Fire- South Carolina, June 18, 2007 Volume I DRAFT FOR PUBLIC COMMENT (for final version, see NIST SP 1118, March 2011)

October 28, 2010

Author(s)

Nelson P. Bryner, Anthony D. Putorti Jr., Stephen P. Fuss, Bryan W. Klein

A fire occurred on the evening of June 18, 2007, in the Sofa Super Store in Charleston, SC. NIST analyzed the fire ground, consulted with other experts, and

Technical Study of the Sofa Super Store Fire-South Carolina, June 18, 2007 Volume II DRAFT FOR PUBLIC COMMENT (for final version, see NIST SP 1119, March 2011)

October 28, 2010

Author(s)

Nelson P. Bryner, Anthony D. Putorti Jr., Stephen P. Fuss, Bryan W. Klein

A fire occurred on the evening of June 18, 2007, in the Sofa Super Store in Charleston, SC. NIST analyzed the fire ground, consulted with other experts, and

Cyber Security Strategies for the Smart Grid: Protecting the Advanced, Digital Infrastructure for Electric Power

October 27, 2010

Author(s)

Shirley M. Radack

This bulletin summarizes the information presented in NISTIR 7628, Guidelines for Smart Grid Cyber Security. The guidelines were developed as a consensus

Graphical User Interface (GUI) for Project 25: Inter-RF Subsystem Interface (ISSI) GUI Version 0.9.6

October 25, 2010

Author(s)

Alan B. Vinh, Richard A. Rouil, Antonio Izquierdo Manzanares, Alexandre Delye

There are two parts to the Project 25: Inter-RF Subsystem Interface (ISSI) model: 1) The server program that models the behavior of the ISSI protocol(s), along

System Builders Manual for Version 2.2.1 of the NIST DMIS Test Suite

October 25, 2010

Author(s)

Thomas R. Kramer, John A. Horst

This manual is a system builders manual for the NIST DMIS Test Suite, version 2.2.1. DMIS (Dimensional Measuring Interface Standard) is a language for writing

Maintainers Manual for Version 2.2.1 of the NIST DMIS Test Suite

October 25, 2010

Author(s)

Thomas R. Kramer, John A. Horst

This manual is a maintainers manual for the NIST DMIS Test Suite, version 2.2.1. DMIS (Dimensional Measuring Interface Standard) is a language for writing

Users Manual for Version 2.2.1 of the NIST DMIS Test Suite

October 25, 2010

Author(s)

Thomas R. Kramer, John A. Horst

This manual is a users manual for the NIST DMIS Test Suite, version 2.2.1. DMIS (Dimensional Measuring Interface Standard) is a language for writing programs

Safety Assessment of Parallel Wire Suspension Bridge Cables Under Thermal Effects

October 25, 2010

Author(s)

Joseph Main, William E. Luecke

This report summarizes a NIST study aimed at assessing the safety of parallel wire suspension bridge cables under thermal effects. Both low temperatures

NIST Handbook 130: Uniform Laws and Regulations in the Areas of Legal Metrology and Engine Fuel Quality (2011 Ed.)

October 24, 2010

Author(s)

Linda D. Crown, Lisa Warfield

This handbook compiles uniform laws and regulations devloped by the Committee on Laws and Regulations of the National Conference on Weights and Measures (NCWM)

Recommendation for Block Cipher Modes of Operation: Three Variants of Ciphertext Stealing for CBC Mode

October 21, 2010

Author(s)

Morris J. Dworkin

A limitation to Cipher Block Chaining (CBC) mode, as specified in NIST Special Publication 800-38A, is that the plaintext input must consist of a sequence of

Security Assurance Levels: A Vector Approach to Describing Security Requirements

October 20, 2010

Author(s)

James D. Gilsinn, Ragnar Schierholz

Safety systems have used the concept of safety integrity levels (SILs) for almost two decades. This allows the safety of a component or system to be represented

Was this page helpful?