The Applied Physics Division currently provides calibration services (NIST Store) or instruments used with the lasers, wavelengths, and power ranges shown in the following table. These are not limiting but are presented to demonstrate the wide scope of capability offered—if you need it we can figure out a way to make it happen or can advise on other options and opportunities. Other laser wavelengths, power, and energy levels are available upon request and we can readily accommodate your source along with your instrument. Custom configurations are routine for our laboratories. We would like to encourage you to reach out to our technical staff Matthew.Spidell [at] nist.gov (Matthew[dot]Spidell[at]nist[dot]gov), Kyle.Rogers [at] nist.gov (Kyle[dot]Rogers[at]nist[dot]gov), Sonia.Buckley [at] nist.gov (Sonia[dot]Buckley[at]nist[dot]gov), and Brian.Simonds [at] nist.gov (Brian[dot]Simonds[at]nist[dot]gov) for additional information and see the services and fees on the Calibrations Storefront.
Type | Description | Wavelength | Range | Documentation | Contact |
---|---|---|---|---|---|
Optical Fiber Power | Absolute Power Calibration | 633, 670, 780, 850, 980, 1310, 1480, 1550, and 1625 nm | 10 - 100 µW | SP250-54 | kyle.rogers [at] nist.gov (Kyle Rogers) |
980 nm | 0.1 - 200 mW | ||||
Optical Fiber Power Meter Linearity | 850, 980, 1300, 1480, and 1550 nm | -90 to 0 dBm | SP250-56 | ||
980 and 1480 nm | 0 to 30 dBm | ||||
Spectral Responsivity of Laser and Optical Fiber Power Meters | 400 - 1700 nm | 10 - 100 µW | SP250-53 | kyle.rogers [at] nist.gov (Kyle Rogers) | |
CW | HeCd laser | 325 nm | 1 µW - 8 mW | SP250-75 |
matthew.spidell [at] nist.gov (Matt Spidell) |
DPSS | 375 nm | 1 µW - 1 W | |||
Diode laser | 405 nm | 1 µW - 20 mW | |||
Argon laser | 351 and 364 nm | 1 µW - 1 W | |||
488 nm | 1 µW - 1 W | ||||
514 nm | 1 µW - 1 W | ||||
HeNe laser | 543 nm | 1 µW - .5 mW | |||
633 nm | 1 µW - 20 mW | ||||
Diode laser | 830 nm | 1 µW - 20 mW | |||
Nd:YAG laser | 532 nm | 1 µW - 2 W | |||
1064 nm | 1 µW - 5 W | ||||
Ti:Sapphire laser | 700 - 1300 nm | 1 µW - 1 W | |||
DPSS laser | 1045 nm | 1 µW - 1 W | |||
1319 nm | 1 µW - 25 mW | ||||
Erbium laser | 1550 nm | 1 µW - 100 mW | |||
Tunable DPSS laser | 1700 - 2100nm | 1 µW - 1 W | |||
DPSS laser | 1920 nm | 1 µW - 1 W | |||
CO2 laser | 10.6 µm |
1 W - 1.5 kW (6 kW off-site) |
SP250-77 | kyle.rogers [at] nist.gov (Kyle Rogers) | |
Yterrbium fiber laser | 1070 nm | 1 W - 10 kW | |||
Dye laser | Contact matthew.spidell [at] nist.gov (Matt Spidell) for details. | ||||
Pulsed | Q-Switched Nd:YAG laser (OPO) |
1574 nm | 11 mJ per-pulse 200 mW Maximum average power |
matthew.spidell [at] nist.gov (Matt Spidell) | |
Q-Switched Nd:YAG laser |
1064 nm | 1 - 300 mJ/pulse energy 1 mW to 6 W average power 1 - 20 Hz laser repetition rate 10 W long pulse |
|||
Q-Switched Nd:YAG laser (doubled) |
532 nm | 30 mJ per-pulse | |||
Q-Switched Nd:YAG laser (Third Harmonic) |
355 nm | 10 mJ per-pulse | |||
Q-Switched Nd:YAG laser (Fourth Harmonic) |
266 nm | 5 mJ per-pulse | |||
KrF excimer laser | 248 nm |
5 µJ/Pulse - 250 mJ/pulse energy |
ULSI 1998 | matthew.spidell [at] nist.gov (Matt Spidell) | |
ArF excimer laser | 193 nm |
5 µJ/Pulse - 5 mJ/pulse energy |
ULSI 2000 |