U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Search Publications

NIST Authors in Bold

Displaying 5526 - 5550 of 73871

Low Temperature Compaction of Nanosize Powders

October 12, 2021
Author(s)
E J. Gonzalez, Gasper J. Piermarini
In recent years there has been a strong interest in the processing of nanosize ceramic powders because of the potential of sintering them at low temperatures and also because ceramic pieces made of nanosize gram structures may exhibit superior mechanical

Low-energy electron collisions with sodium: Scattering of spin-polarized electrons

October 12, 2021
Author(s)
H L. Zhou, B L. Whitten, W K. Trail, M A. Morrison, K B. MacAdam, K Bartschat, D W. Norcross
The electron-sodium system is an excellent prototype of non-relativistic electron scattering from a quasi-one-electron atomic target, and is tractable both experimentally and theoretically. Recently, this system has been studied in a series of

Low-Temperature Kinetics of the Reaction of the OH Radical With Hydrogen Peroxide

October 12, 2021
Author(s)
A B. Vakhtin, D C. McCabe, A R. Ravishankara, S R. Leone
The kinetics of the reaction of the OH radical with hydrogen peroxide. H 2O 2 are studied over a temperature range of 96-296 K. The low-temperature environment is provided by a pulsed Laval nozzle supersonic expansion of nitrogen with admixed H 2O 2

Magnetic depth profiling Co/Cu multilayers to investigate magnetoresistance

October 12, 2021
Author(s)
John Unguris, D. Tulchinsky, Michael H. Kelley, Julie Borchers, Joseph Dura, Charles Majkrzak, S. Y. Hsu, R. Loloee, W. P. Pratt, J. Bass
The magnetic microstructure responsible for the metastable high resistance state of weakly coupled, as-prepared [Co(6nm)/Cu(6nm)] 20 multilayers was analyzed using polarized neutron reflectivity and scanning electron microscopy with polarization analysis

Magnetoelectric Nanocomposite Thin Films Designed by Composition Spreads

October 12, 2021
Author(s)
Makoto Murakami, C Gao, K S. Chang, B Hu, M A. Aronova, C L. Lin, Jason Hattrick-Simpers, S E. Lofland, L Knauss, Leonid A. Bendersky, M. Wuttig, Ichiro Takeuchi
Multiferroic materials Superscript (1,2) can exhibit magnetoelectric (ME) effects Superscript (3-5), which are of great interest for novel device applications including inexpensive ultrasensitive magnetometer approaching the sensitivity of SQUID

MALDI TOF MS Analysis of Chan End Functonalized Polymers

October 12, 2021
Author(s)
Kathleen M. Flynn, Barry J. Bauer, Kathryn Beers, S Bencherif, H M. Byrd, Sheng Lin-Gibson
Recently, we and other research laboratories have developed methods whereby an organic species is covalently attached to the polymer forming an organic salt to analyze by matrix assisted laser desorption ionization time of flight mass spectrometry (MALDI

Manganese-Enhanced Magnetic Resonance Microscopy of Mineralization

October 12, 2021
Author(s)
I Chesnick, T Todorov, J M. Centeno, Dale Newbury, John A. Small, K Potter
Paramagnetic manganese (II) can be employed as a calcium surrogate to enhance the sensitivity of the magnetic resonance microscopy (MRM) technique to the processing of calcium during the bone formation process. At high doses, osteoblasts can take up

Manufacture of Al/SiC Metal Matrix Composites by the Press and Sinter Route

October 12, 2021
Author(s)
G T. Campbell, R Raman, Richard J. Fields
Aluminum based Metal Matrix Composites (MMC's) are being considered for many different high volume applications. The most common manufacturing rout for aluminum based MMC's is a blend/can/extrude route. This route is considered high cost and not

Manufacture of Extremely Flat 300 mm Silicon Wafers

October 12, 2021
Author(s)
Marc Tricard, Paul Dumas, Christopher Hall, Ulf Griesmann, Quandou (. Wang
The flatness requirement for silicon wafers at the exposure site will be lower than 50 nm by 2010 and may be as low as 25nm by 2015 (TRS 2005). This creates new challenges for both wafer polishing and metrology tools capable of meeting the specifications

Margin Failures in Brittle Dome Structures: Relevance to Failure of Dental Crowns

October 12, 2021
Author(s)
T Qasim, Chris Ford, M T. Bush, X Z. Hu, Kenneth Malament, Brian R. Lawn
Margin cracks in loaded brittle dome structures are investigated. Dome structures consisting of glass shells filled with polymer resin, simulating the essential features of brittle crowns on tooth dentin, provide model test specimens. Disk indenters of

Materials Data in the Internet Era - A Workshop on the Future

October 12, 2021
Author(s)
C P. Sturrock, J R. Rumble
In May 1999, ASTM E49 and the National Institute of Standards and Technology hosted a workshop in which over 100 international experts on materials data, materials databases and the Internet considered how ASTM can best serve the materials community with

MatML: XML for Information Exchange With Materials Property Data

October 12, 2021
Author(s)
A S. Varde, E F. Begley, S Fahrenholz-Mann
This paper describes the development and use of MatML, the Materials Markup Language. MatML is an emerging XML standard intended primarily for the exchange of materials property information. It provides a medium of communication for users in materials

Measurement of Nonlinear Phase Generated in Air-Silica Microstructure Fiber

October 12, 2021
Author(s)
T M. Fortier, Jun Ye, Steven T. Cundiff, R S. Windler
We present measurementsof the nonlinear phase noise generated in air-silica microstructure fiber, which is used in carrier envelope phase stabilization schemes for ultrafast lasers. The extreme nonlinearity exhibited by these fibers may result in amplitude

Measuring Tip Shape for Instrumented Indentation Using Atomic Force Microscopy

October 12, 2021
Author(s)
Mark R. VanLandingham, John S. Villarrubia, R M. Camara
Atomic Force Microscopy (AFM) was used to determine the three-dimensional shape of probe tips used for instrumented indentation. AFM images were taken for three probe tips with several different image sizes. The geometry obtained directly from the images

Mechanical Strength of Various Types of Calcium Phosphate Cements

October 12, 2021
Author(s)
Y Matsuya, S Matsuya, Joseph M. Antonucci, S. Takagi, Laurence Chow, A Akashi, A Akamine
It has been reported that organic or polymeric calcium phosphate cements can be made from reactive calcium phosphates with various organic acids or poly(alkenoic acids). Some of these cements are already commercially available for use as bioactive liners

Medical Implant Information, Performance, and Policies Workshop

October 12, 2021
Author(s)
A A. Ciarkowski, G Devey, H Heffernan, C A. Kelley, B Liebler, W F. Regnault, W L. Shinowara, M D. Sourwine, John A. Tesk, J R. Watson
The BMIS Coordinating Committee organized a workshop on September 19 and 20, 2002, in Gaithersburg, MD, to evaluate the role of the Federal Government in extracting and disseminating information gained from explanted medical implants to provide information
Displaying 5526 - 5550 of 73871
Was this page helpful?