U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Search Publications

NIST Authors in Bold

Displaying 101 - 125 of 423

Measuring the Leakage Current to Ground in Programmable Josephson Voltage Standards

July 7, 2018
Author(s)
Alain Rufenacht, Charles J. Burroughs, Paul Dresselhaus, Samuel P. Benz
The voltage error associated with the leakage current of programmable Josephson voltage standards (PJVS) is one of the largest contributions to the uncertainty in direct comparison of voltage standards. Due to the parallel biasing scheme of the PJVS and

Radiofrequency Waveform Synthesis with the Josephson Arbitrary Waveform Synthesizer

July 7, 2018
Author(s)
Justus Brevik, Christine A. Donnelly, Nathan Flowers-Jacobs, Anna Fox, Pete Hopkins, Paul Dresselhaus, Samuel P. Benz
We have measured the frequency-dependent voltage output up to 100 MHz of a modified version of the Josephson Arbitrary Waveform Synthesizer. An impedance-matching resistor was integrated within the Josephson junction array circuit to match the nominally

Three Volt Pulse-Driven Josephson Arbitrary Waveform Synthesizer

July 7, 2018
Author(s)
Nathan Flowers-Jacobs, Alain Rufenacht, Anna Fox, Steven B. Waltman, Justus Brevik, Paul Dresselhaus, Samuel P. Benz
This paper describes a new generation of Josephson Arbitrary Waveform Synthesizers which generate ac waveforms with a root-mean-squared (rms) amplitude of 3 V over a quantum-accurate operating range greater than 1 mA at 1 kHz. This system is composed of

Resonator Stabilization Architecture to Suppress Switching Transient Crosstalk in I-CDM

May 30, 2018
Author(s)
Malcolm S. Durkin, Joel C. Weber, William B. Doriese, Gene C. Hilton, Daniel S. Swetz, Joel N. Ullom
The ever-increasing sizes of transition-edge sensor (TES) microcalorimeter arrays motivates improved multiplexed readout with large multiplexing factors, low power dissipation, and low levels of crosstalk. Current-summed code division multiplexing (I-CDM)

Anomalous Supercurrent Modulation in Josephson Junctions With Ni-Based Barriers

May 15, 2018
Author(s)
Burm Baek, Michael L. Schneider, Matthew R. Pufall, William H. Rippard
We investigate the supercurrent transport characteristics of Ni-barrier Josephson junctions with various barrier multilayer structures. Our device fabrication and magneto-electrical measurement methods provide high enough statistics and rigor necessary for

Direct DC 10 V comparison between two Programmable Josephson Voltage Standards made of Niobium Nitride (NbN)-based and amorphous niobium silicon (NbxSi1-x)-based Josephson Junctions

March 15, 2018
Author(s)
Alain Rufenacht, Stephane Solve, M Maruyama, Chiharu Urano, Nobu Kaneko
For the first time, the BIPM’s new transportable programmable Josephson voltage standard (PJVS) has been used for an on-site comparison at the National Metrology Institute of Japan (NMIJ), the National Institute of Advanced Industrial Science and

Approaches to the Optimal Nonlinear Analysis of Microcalorimeter Pulses

March 8, 2018
Author(s)
Joseph W. Fowler, Christine G. Pappas, Bradley K. Alpert, William B. Doriese, Galen C. O'Neil, Joel N. Ullom, Daniel S. Swetz
We consider how to analyze microcalorimeter pulses for quantities that are nonlinear in the data, while preserving the signal-to-noise advantages of linear optimal filtering. We apply the approach to compute the electrothermal feedback energy deficit (the

The Boltzmann Project

February 5, 2018
Author(s)
Samuel P. Benz, Joachim Fischer, Bernd Fellmuth, Christof Gaiser, Laurent Pitre, Fernando Sparasci, Lara Risegari, Roberto M. Gavioso, D M. Rippa, Bengt Hallstedt, Jifeng Qu, XiaoJuan Feng, Jianqiang Zhang, David R. White, L Gianfrani, A Castrillo, L Moretti, B Darquie, C Daussy, S Briaudeau, O Kozlova, J J. Segovia, M C. Martin, D del Campo, Michael R. Moldover
The International Committee for Weights and Measures (CIPM), at its meeting in October 2017 followed the recommendation of the Consultative Committee for Units (CCU) on the redefinition of the kilogram, ampere, kelvin and mole. For the redefinition of the

The NIST Johnson noise thermometry system for the determination of the Boltzmann constant

December 29, 2017
Author(s)
Nathan Flowers-Jacobs, Alessio Pollarolo, Kevin Coakley, Adam C. Weis, Anna Fox, Horst Rogalla, Weston L. Tew, Samuel Benz
In preparation for the redefinition of the International System of Units (SI), five different electronic measurements of the Boltzmann constant have been performed using different Johnson noise thermometry (JNT) systems over the past seven years. In this

Dependence of transition width on current and critical current in transition-edge sensors

December 7, 2017
Author(s)
Kelsey M. Morgan, Christine G. Pappas, Douglas A. Bennett, Johnathon D. Gard, James P. Hays-Wehle, Gene C. Hilton, Carl D. Reintsema, Daniel R. Schmidt, Joel N. Ullom, Daniel S. Swetz
If transition-edge sensor (TES) X-ray detectors are to be useful in photon-rich environments,they must maintain high resolving power when pulse durations are engineered to be short, which is usually accomplished by increasing the thermal conductance (G)to

Simultaneous readout of 128 X-ray and Gamma-ray Transition-edge Microcalorimeters using Microwave SQUID Multiplexing

August 8, 2017
Author(s)
John Mates, Dan Becker, Douglas Bennett, Johnathon Gard, James P. Hays-Wehle, Joseph Fowler, Gene C. Hilton, Carl D. Reintsema, Dan Schmidt, Daniel Swetz, Leila R. Vale, Joel Ullom
The number of elements in most cryogenic sensor arrays is limited by the technology available to multiplex signals from the array into a smaller number of wires and readout amplifiers. The largest demonstrated arrays of transition-edge sensor (TES)

An improved electronic measurement of the Boltzmann constant by Johnson noise thermometry

July 18, 2017
Author(s)
Jifeng Qu, Samuel Benz, Kevin Coakley, Horst Rogalla, Weston L. Tew, David R. White, Kunli Zhou, Zhenyu Zhou
Recent measurements using acoustic gas thermometry have determined the value of the Boltzmann constant, k, with a relative uncertainty less than 110-6. These results have been supported by a measurement with a relative uncertainty of 1.910-6 made with

Cryogenic LED pixel-to-frequency mapper for kinetic inductance detector arrays

July 12, 2017
Author(s)
Jiansong Gao, Xiangliang Liu, W Guo, Wei L.F., Christopher M. McKenney, Bradley J. Dober, Tasha Billings, Johannes Hubmayr
We present a cryogenic wafer mapper based on light emitting diodes (LEDs) for mapping a large microwave kinetic inductance detector (MKID) array. In this scheme, an array of LEDs, addressed by DC wires and collimated through horns onto the detectors, are

Demonstration of efficient nonreciprocity in a microwave optomechanical circuit

July 6, 2017
Author(s)
Gabriel A. Peterson, Florent Q. Lecocq, Katarina Cicak, Raymond W. Simmonds, Jose A. Aumentado, John D. Teufel
Abstract The ability to engineer nonreciprocal interactions is an essential tool in modern communication technology as well as a powerful resource for building quantum networks. Aside from large reverse isolation, a nonreciprocal device suitable for

Fabrication of High-Speed and High-Density Single-Flux-Quantum Circuits at NIST

June 11, 2017
Author(s)
David Olaya, Paul Dresselhaus, Pete Hopkins, Samuel P. Benz
The development of a fabrication process for single-flux-quantum (SFQ) digital circuits is a fundamental part of the NIST effort to develop a gigahertz waveform synthesizer with quantum voltage accuracy. This paper describes the current SFQ fabrication

Scalable, High-Speed, Digital Single-Flux-Quantum Circuits at NIST

June 11, 2017
Author(s)
Pete Hopkins, Manuel Castellanos Beltran, Christine A. Donnelly, Paul Dresselhaus, David Olaya, Adam Sirois, Samuel P. Benz
We describe NIST's capabilities for designing and fabricating niobium-based single-flux quantum (SFQ) digital and mixed-signal circuits and show test results of our first circuits. We have assembled a package of software design tools that are readily

Bandwidth-enhanced superconducting nanowire single photon detectors for telecom wavelengths

May 13, 2017
Author(s)
Stephan Krapick, Marina Hesselberg, Varun Verma, Igor Vayshenker, Sae Woo Nam, Richard Mirin
We present a single-photon detector providing system detection efficiencies of at least (86.7 ± 0.9) % from 1450 nm to 1640 nm. It comprises bilayer superconducting WSi nanowires in conjunction with all-dielectric structures for optical impedance matching

Broadband parametric amplifiers based on nonlinear kinetic inductance artificial transmission lines

April 11, 2017
Author(s)
Jiansong Gao, Saptarshi Chaudhuri, Dale Li, Kent D. Irwin, Clint Bockstiegel, Weijie Guo, Xiangliang Liu, Johannes Hubmayr
We present broadband parametric amplifiers based on the kinetic inductance of superconducting NbTiN thin films and an artificial (lumped-element) transmission line architecture. We demonstrate two amplifier designs implementing two different phase matching

Superconducting Optoelectronic Circuits for Neuromorphic Computing

March 23, 2017
Author(s)
Jeffrey M. Shainline, Sonia M. Buckley, Richard P. Mirin, Sae Woo Nam
We propose a hybrid semiconductor-superconductor hardware platform for the implementation of neural networks and large-scale neuromorphic computing. The platform combines semiconducting few-photon light-emitting diodes with superconducting-nanowire single

Advanced Waveform Synthesis with Pulse-driven Josephson Voltage Standards

February 21, 2017
Author(s)
Justus A. Brevik, Nathan E. Flowers-Jacobs, Anna E. Fox, Evan B. Golden, Paul D. Dresselhaus, Samuel P. Benz
We describe the implementation of new commercial pulse-bias electronics that have enabled an improvement in the generation of quantum-accurate waveforms both with and without low-frequency compensation biases. We have used these electronics to apply a

Compact 2.2 K Cooling System for Superconducting Nanowire Single Photon Detectors

January 25, 2017
Author(s)
Vincent Y. Kotsubo, Ray Radebaugh, Sae Woo Nam, Joel N. Ullom, Brandon L. Wilson, Paul Hendershott, Micheal Bonczyski
We are developing a compact, low power, closed cycle cooling system for Superconducting Nanowire Single Photon Detectors. The base temperature of the present prototype, which uses a helium-4 Joule-Thomson stage, is 2.2 K with over 1.2 mW of cooling. This
Displaying 101 - 125 of 423