News and Updates

Displaying 1 - 25 of 68

An In-Depth Look into Intellectual Property: Part Two

January 21, 2020

Identify NIST Intellectual Property A foundational step in the NIST intellectual property (IP) strategy is to identify

NIST Requesting Information to Upgrade the iEdison System

January 15, 2020

The National Institute of Standards and Technology (NIST) plans to begin modernizing the Interagency Edison System

An old-fashioned Edison lightbulb hangs from a wire.

NIST to Revamp iEdison Tool for Reporting Federally Funded Inventions

January 13, 2020

GAITHERSBURG, Md. — As part of its efforts to improve the transfer of federally funded technologies from lab to market

An In-Depth Look into Intellectual Property: Part One

January 10, 2020

Introduction NIST has a broad mission to promote U.S. innovation and industrial competitiveness by advancing measurement

NIST Publishes 2018 Department of Commerce Laboratories Technology Transfer Report

December 31, 2019

The National Institute of Standards and Technology (NIST) has issued the U.S. Department of Commerce’s (DOC) 2018 Annual

Maryland Department of Commerce’s inaugural Maryland Innovation & Technology (MINT) Series

December 23, 2019

BETHESDA, Md. – More than 200 personnel from the federal government, industry, academia and economic development

NIST Scientists and Engineers Pitch Innovations to Venture Capitalists

December 18, 2019

The Technology Partnerships Office (TPO) at the National Institute of Standards and Technology (NIST), on December 02

Winners of the 2019 Galvanize Boulder Lab Venture Challenge

November 20, 2019

On November 12-13, 2019, Galvanize Boulder hosted the 2019 Lab Venture Challenge. Think Shark Tank! Eleven entrepreneurs

Image of Fortzaleza Street in San Juan Puerto Rico

NIST Takes T2 to Puerto Rico to Help Drive Economic Development

November 20, 2019

SAN JUAN, Puerto Rico – Members of the National Institute of Standards and Technology’s (NIST) Technology Partnerships

Something new from the Technology Partnerships Office

November 19, 2019

Patenting NIST technologies serves as a gateway to the commercialization of NIST innovations. Patents promote NIST’s

Upcoming “Accelerate R2 Network Challenge” to Award $1 Million

November 7, 2019

The Economic Development Agency, the National Institute of Standards and Technology and First Responder Network

SBIR funds internationally marketable quality audit instrument

November 1, 2019

En’Urga Inc., an advanced diagnostic equipment company, recently found success with a Small Business Innovation Research

Venture Capitalists Share Their Insights With NIST

October 30, 2019

GAITHERSBURG, Maryland – The Technology Partnerships Office (TPO) hosted a NIST-wide discussion with experienced venture

Exploring AI Algorithms to Support Federal T2

October 15, 2019

A collaborative effort of the Federal Laboratory Consortium Mid-Atlantic (FLC-MA) Region, Carnegie Mellon University

Image of Kyle Clark-Sutton (RTI), Alan O’Connor (RTI), and Dr. Chris Oates (NIST Boulder Group Leader, Optical Frequency Measurements Group), at NIST Boulder, after viewing the Ytterbium (Yb) Lattice Clock.

Economic Benefits of the Global Positioning System to the U.S. Private Sector Study

October 2, 2019

On a recent bright and sunny morning at the NIST Boulder campus, the Technology Partnerships Office (TPO) hosted the

Take a short course in technology transfer (T2) 101

September 25, 2019

Say the term, “Technology Transfer,” to practicing scientists, engineers, and other technical professionals, and one

An electron micrograph showing many blue-colored nanoscale (billionth of a meter) particles of varying sizes and shapes scattered atop a silicon wafer.

NIST Awards Nearly $4 Million to 19 Small Businesses for Technology Development

September 13, 2019

GAITHERSBURG, Md. — The U.S. Department of Commerce’s National Institute of Standards and Technology (NIST) has awarded

Dr. Nicole L. Ritzert is pictured in her ADA lab.

NIST Continues 1920s CRADA Partnership with the American Dental Association

August 1, 2019

The interagency research, which has led to dental products such as tooth-colored composites, the front surface dental

The Congressional Tech Transfer Caucus Announcement for the Academic Research Commercialization

July 2, 2019

By, Robin Bunch, Technical Program ManagerTechnology Discovery Office The NIST Summer Undergraduate Research

Photograph of Sarayu Srinivasan leaning against a wall

NIST Welcomes its 2019 PIF

June 12, 2019

This year’s National Institute of Standards and Technology (NIST) Presidential Innovation Fellow (PIF) is taking on a

The cover of the report is green and black, with the title "Return on Investment Initiative, Final Green Paper, April 2019"

NIST Releases Findings on Increasing the Innovation Impacts of Federally Funded R&D

April 24, 2019

GAITHERSBURG, Md.—Today, the U.S. Department of Commerce’s National Institute of Standards and Technology announced 15

NIST Announces 2019 Opportunities for Small Businesses

March 14, 2019

The U.S. Department of Commerce’s National Institute of Standards and Technology (NIST) has announced the fiscal year

Commerce’s NIST Announces Actions to Stimulate Commercialization of Federally Funded R&D

December 6, 2018

GAITHERSBURG, Md.— The United States spends more than any other nation on research and development (R&D) each year

Close up of the NIST chip-scale atomic clock

NIST Awards Funds for Cloud-Based Tool Connecting Private-Sector Investment and Federal Innovation

October 24, 2018

GAITHERSBURG, Md.—The U.S. Department of Commerce’s National Institute of Standards and Technology (NIST) and National

Two graphics of stylized keys facing opposite directions float in front of a background of blue 1s and 0s

NIST’s Encryption Standard Has Minimum $250 Billion Economic Benefit, According to New Study

September 19, 2018

GAITHERSBURG, Md.—The U.S. Department of Commerce’s National Institute of Standards and Technology (NIST) has released a

Advanced communications
-Optical communications
-Quantum communications
-Wireless (RF)
Bioscience
-Biomaterials
-Bioprocessing
-Cell biology
-Engineering / synthetic biology
-Genomic measurements
-Glycomics
-Lipidomics
-Microbial measurements
-Proteomics
Buildings and Construction
-Air conditioning and heating equipment
-Building codes and standards
-Building control systems
-Building damage and repair
-Building economics
-Building materials
-Indoor air quality
-Structural engineering
Chemistry
-Analytical chemistry
-Chemical engineering and processing
-Chemical thermodynamics and chemical properties
-Molecular characterization
-Theoretical chemistry and modeling
-Thermochemical properties
Electronics
-Electromagnetics
-Magnetoelectronics
-Optoelectronics
-Organic electronics
-Semiconductors
-Sensors
-Superconducting electronics
-Thin-film electronics
Energy
-Alternative energy
-Conventional energy
-Electric power / smart grid
-Energy efficiency
-Fuels
-Sustainability
Environment
-Air / water / soil quality
-Environmental health
-Greenhouse gas measurements
-Marine science
Fire
-Emergency building evacuation
-Fire detection
-Fire dynamics and science
-Fire fighting
-Fire modeling
-Fire risk reduction
-Materials flammability
-Structural fire resistance
-Wildland urban interface fire
Forensic Science
-Ballistics
-Digital evidence
-DNA and biological evidence
-Drugs and toxicology
-Fingerprints and pattern evidence
-Trace evidence
Health
-Cell therapies
-Clinical diagnostics
-Dentistry
-Food and nutrition
-Medical imaging
-Pharmaceuticals
-Precision medicine
-Radiation therapies
Information technology
-Artificial intelligence
-Biometrics
-Cloud computing and virtualization
-Complex systems
-Computational science
-Conformance testing
-Cyber-physical systems
--Smart cities
-Cybersecurity
--Configuration and vulnerability management
--Cryptography
--Cybersecurity education and workforce development
--Identity and access management
--Risk management
-Data and informatics
--Human language technology
--Information retrieval
--Natural language processing
--Video analytics
-Federal information standards (FIPS)
-Health IT
-Identity management
-Internet of Things (IoT)
-Interoperability testing
-Mobile
-Networking
--Mobile and wireless networking
--Network management and monitoring
--Network modeling and analysis
--Network security and robustness
--Network test and measurement
--Next generation networks
--Protocol design and standardization
--Software defined and virtual networks
-Privacy
-Software research
--Software assurance
--Software performance
--Software testing
-Usability and human factors
--Accessibility
-Visualization research
-Voting systems
Infrastructure
Manufacturing
-Additive manufacturing
-Biomanufacturing
-Exports
-Factory communications
-Factory operations planning and control
-Interoperability in manufacturing
-Lean manufacturing
-Machining
-Manufacturing systems design and analysis
-Manufacturing workforce
-Process improvement
-Process measurement and control
-Product data
-Quality assurance
-Robotics in manufacturing
--Agility and adaptability
--Collaborative robots
--Dexterous grasping
--Industrial autonomous vehicles
--Mobile manipulators
--Navigation / actuation / control
--Sensing and perception
-Supply chain
-Sustainable manufacturing
-Systems engineering
-Systems integration
-Technology commercialization
Materials
-Ceramics
-Composites
-Concrete / cement
-Materials characterization
--Composition and structure
--Magnetic properties
--Mechanical properties
--Thermal properties
-Metals
-Modeling and computational material science
-Polymers
-Superconductors
Mathematics and Statistics
-Experiment design
-Image and signal processing
-Mathematical knowledge management
-Modeling and simulation research
-Numerical methods and software
-Statistical analysis
-Uncertainty quantification
Metrology
-Acoustic / vibration metrology
-Amount of substance
-Dimensional metrology
-Electrical / electromagnetic metrology
-Environmental metrology
-Flow metrology and rheology
-Force metrology
-Humidity metrology
-Ionizing radiation metrology
-Mass metrology
-Metric
-Optical / photometry / laser metrology
-Pressure and vacuum metrology
-Thermometry metrology
-Time and frequency metrology
-Weights and measures
Nanotechnology
-Nanobiotechnology
-Nanochemistry
-Nanoelectronics
-Nanofabrication / manufacturing
--Lithography
--Self-assembly
-Nanofluidics
-Nanomagnetics
-Nanomaterials
-Nanomechanics
-Nanometrology
-Nanophotonics
-Nanophysics
-Nanoplasmonics
Neutron research
Performance excellence
-Assessment tools and services
-Baldrige award
-Baldrige examiners
-Baldrige Framework and Criteria
-Best practices
-Leadership development
Physics
-Atomic / molecular / quantum
-Biological physics
-Condensed matter
-Electron physics
-Magnetics
-Nuclear physics
-Optical physics
-Quantum information science
-Radiation
-Spectroscopy
-Thermodynamics
-Time and frequency
Public safety
-Chemical / Biological / Radiological / Nuclear / Explosives (CBRNE)
-First responder preparedness
-Law enforcement
-Physical security
-Public safety communications research
-Response robots
--Aerial
--Aquatic and underwater
--Ground
Resilience
-Community resilience
-Disaster and failure studies
-Earthquake risk reduction
-Resilient materials
-Windstorm impact reduction
Standards
-Accreditation
-Calibration services
-Certification
-Commercial standards
-Conformity assessment
-Documentary standards
-Frameworks
-Reference data
-Reference instruments
-Reference materials
-Standards education
Transportation
-Aerospace
-Automotive
-Rail