U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Projects/Programs

Topic Area
Displaying 1276 - 1300 of 1662

Quantum Physics Theory

Ongoing
The scope of the work ranges from calculations of QED effects in atoms to detailed studies of photon wave functions.
equipment

Quantum Radiometry

Ongoing
For quantum applications, it is important to generate quantum states of light and detect them with extremely high efficiency. This project explores the metrology challenges associated with precision measurement of single photon sources and detectors. The classical photonic radiometry techniques used

Quantum Simulation and Sensing with Trapped Ions

Ongoing
Entanglement between individual quantum objects exponentially increases the complexity of quantum many-body systems, so systems with more than 30-40 quantum bits cannot be fully studied using conventional techniques and computers. To make progress at this frontier of physics, we are pursuing Feynman

Quantum State-Resolved Spectroscopic Techniques

Ongoing
Terahertz radiation interrogates the lowest frequency vibrational (phonon) modes of biomolecules. These modes characterize the incipient motions for large-scale conformational changes responsible for the backbone flexibility of protein, polynucleotide and polysaccharide. Thus, terahertz spectral
Measuring the quantum value of resistance

Quantum Transport Measurements

Ongoing
It is necessary to isolate, control, and understand the fundamental physics of exotic states of matter to create nanoengineered systems with the requisite quantum properties for quantum information systems and advanced computing applications. We develop measurement capabilities and design test
10 V programmable Josephson voltage standard (PJVS) and (right) PJVS cryopackaged chip, which are disseminated by the NIST standard reference instrument (SRI) program.

Quantum Voltage Project

Ongoing
Researchers in the Quantum Voltage Project develop and disseminate highly accurate instruments that exploit the quantum mechanical properties of superconductive devices known as Josephson junctions (JJs), as well as measurement techniques and best-practices for using these instruments. When a JJ is
modulation

Quantum Waveform Metrology

Ongoing
The 2019 redefinition of the SI was motivated in part by the success of quantum electrical standards, such as those based on the Josephson and quantum Hall effects. Quantum standards enable the direct realization of physical quantities that are traceable to fundamental constants, invariant with
An image of the logo for the Rapid Drug Analysis and Research program.

RaDAR Training Materials

Ongoing
Qualitative Sampling Slides Download the qualitative sample collection training slides. Last Updated: November 2024 Videos Below are a series of videos that demonstrate how to collect samples for qualitative analysis using different collection materials. Quantitative Sampling Slides Download the
dosimeters

Radiation Protection: Support of the Navy Dosimetry Program

Ongoing
Since 2010, the U.S. Navy has adopted a personal dosimeter designated as the model DT-702/PD, which was demonstrated to have an improved accuracy, energy discrimination and a lower detection limit than prior Navy designated models such as the DT-5XX/PD and DT-6XX/PD series. This dosimeter is used to
Thermoluminescent Dosimeter (TLD) Card

Radiation Sensitivity of Thermoluminescent Dosimeter Sensors

Completed
The radiation sensitivity of a Thermoluminescent Dosimeter (TLD) is defined as dosimeter light output per dose unit. TLD light output depends not only on the sensitivity of the TLD elements (Fig.1) but also on the transparency of the Teflon® used for their encapsulation. The effect of encapsulation
radiation thermometry

Radiation Thermometry

Ongoing
Radiation thermometers are calibrated using a range of variable-temperature blackbodies. For heatpipe blackbodies and fluid-stirred blackbodies, the temperatures of these blackbodies are determined using platinum resistance thermometers. These blackbodies can also be assigned temperatures using

Radiative Decay of the Neutron

Ongoing
When a neutron decays by its radiative decay (RDK) mode, it produces a photon with a energy spectrum predicted by Quantum Electrodynamics. These RDK photons deposit energy in scintillators which produce voltage pulses in Avalanche Photo Diodes. We are developing nonlinear calibration models to

Radioanalytical Metrology

Ongoing
The Group engages in a wide range of methods applicable to the detection and characterization of nuclear materials. The work can benefit environmental studies, waste remediation, naturally occurring radioactivity detection and characterization and general radioanalytical metrology. Expertise in

Raman Metrology and Instrumentation

Ongoing
Raman spectroscopy/microscopy is a powerful optical technique for rapid, non-destructive, label-free characterization of materials. It works under ambient conditions, often without requirement of any sample preparation. Applications span microelectronics, pharmaceutical, security and fundamental
A photo of a rapid DNA typing instrument. A screen controls the interface and a chip is loaded into the instrument.

Rapid DNA Typing

Ongoing
The Applied Genetics Group at NIST has been involved in testing integrated rapid DNA instruments since the prototype stage in the fall of 2012 and began robustly testing the maturity of these rapid DNA instruments in 2013. The three maturity assessments conducted by NIST focused on the genotyping
Nanoparticles labeled infographic. Microscopic element vector illustration.

Reactivity of Nanoparticle Catalysts

Ongoing
Goals: Provide mechanisms for various prototypical electrocatalytic reactions on different metallic surfaces an nanoparticles. Validate the results of DFT calculations versus experimental data. Research Activities: Studying the methanol oxidation reaction on Pt and PtRu surfaces. Studying the effect
Photograph of a long pink flame against a black background, emanating from a torch, with small blue cone near the base of the nozzle.

Real Fuels

Ongoing
The variability of the price of oil, the need for energy efficiency and pollution minimization has led to increasing interest in alternative fuels. These fuels are structurally and compositionally different than the conventional fuels presently used.  Past work on conventional fuels have established

Real-time Image Intensity Transformation for Surgical Displays

Ongoing
The goal of the project is to develop multiple approaches to fusing dim fluorescent and vivid bright-field images such that surgery-relevant anatomical features are easily perceived. Our approach is based on transforming image intensities in fluorescent surgical microscopy images and blending them

Real-Time Monitoring and Control of Additive Manufacturing Processes

Completed
Objective: Develop process metrology, in-process sensing methods, and real-time process control approaches to maximize part quality and production throughput in Additive Manufacturing (AM). Technical Idea: Additively manufactured metal parts can have many quality issues, such as undesired pores or
Graphic depicting the complexity of reclaimed and recaptured plastics. Textiles (arm chair, t-shirt, and spool of yarn), plastic containers (jug, rectangular food containers, and bag), and gaoline pump - along with chemical structures surround a globe with the bottom half covered with three buildings and half of a mechanical gear.

Recaptured and Reclaimed Plastic Measurements

Ongoing
Plastics are a complex mixture of various types of polymers with different chemical structures, shapes, and chemical additives. From microscopic nanoplastics (as small as 1 nm) to large megaplastics (over 1 m), plastic poses significant measurement science challenges. By developing accurate methods
Was this page helpful?