U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Search Publications

NIST Authors in Bold

Displaying 101 - 125 of 1837

Effect of network connectivity on behavior of synthetic Broborg Hillfort glasses

September 2, 2022
Author(s)
Jose Marcial, Maria Cicconi, Carolyn Pearce, Jaroslav Klouzek, James Neeway, Richard Pokorny, Miroslava Vernerova, John McCloy, Emily Nienhuis, Rolf Sjoblom, Jamie Weaver, Russell Hand, Pavel Hrma, Albert Kruger
There is wide industrial interest in developing robust models of long-term (>100years) glass durability. Archeological glass analogs, glasses of similar composition, and alteration conditions to those being tested for durability can be used to evaluate and

ALD deposited amorphous alumina coatings can slow glass alteration

August 31, 2022
Author(s)
Miriam Hiebert, Jamie Weaver, Thomas Lam, Nicole Little, Ethan Hyde, Edward Vicenzi, Ray A. Phaneuf
Atomic layer deposited (ALD) amorphous aluminum oxide and titanium oxide coatings have been investigated for use in reducing the rate of silicate glass alteration. Mass spectrometric analysis of leachate from elevated temperature aqueous immersion

Connecting entropy scaling and density scaling

August 17, 2022
Author(s)
Ian Bell, Robin Fingerhut, Jadran Vrabec, Lorenzo Costigliola
It is shown that the residual entropy (entropy minus that of the ideal gas at the same temperature and density) is mostly synonymous with the independent variable of density scaling, identifying a direct link between these two approaches. The residual

Relative effects of polymer composition and sample preparation on glass dynamics

August 17, 2022
Author(s)
Christopher Soles, Amanda L. Forster, Katherine Evans, Madhusudan (Madhu) Tyagi, Robert M. Elder, Timothy Sirk, Joseph Dennis, Kanae Ito, Osama Yamamuro, Hiroshi Akiba
Modern design of common adhesives, composites and polymeric parts makes use of polymer glasses that are stiff enough to maintain their shape under a high stress while still maintaining a ductile behavior after the yield point. Typically, material

Effect of Tribologically-Induced Changes in Surface Termination of Silicon-Containing Diamond-Like Carbon Coatings on the Resistance to Biomolecule Adsorption

August 1, 2022
Author(s)
Cherno Jaye, Daniel A. Fischer, Zixuan Li, Jennings Z. Ye, Jieming Yan, Nicolas Molina, Hsu-Ming Lien, Robert Chrostowksi, Jianliang Lin, Mangolini Mangolini
Silicon-containing diamond-like carbon (DLC) is a class of thin-film materials with excellent mechanical properties, high thermal stability, and good tribological performance over a wide range of environmental conditions. While non-alloyed/non-doped DLCs

Levels and profiles of perfluorinated alkyl acids in liver tissues of birds with different habitat types and trophic levels from an urbanized coastal region of South Korea

August 1, 2022
Author(s)
Sang Hee Hong, Jessica L. Reiner, Mi Jang, Stacy Schuur, Gi Myung Han, John Kucklick, Won Joon Shim
Contamination status and characteristics of perfluorinated alkyl acids (PFAAs) including perfluorinated carboxylic acids (PFCAs) and perfluorinated sulfonic acids (PFSAs) was examined using liver tissue of birds - blacktailed gulls (Larus crassirostris)

Thermal Conductivity of Binary Mixtures of 1,1,1,2-Tetrafluoroethane(R-134a), 2,3,3,3-Tetrafluoropropene (R-1234yf), and trans-1,3,3,3-Tetrafluoropropene (R-1234ze(E)) Refrigerants

July 28, 2022
Author(s)
Aaron Rowane, Ian Bell, Marcia L. Huber, Richard A. Perkins
A total of 2160 thermal conductivity data points, measured using a transient hot-wire instrument, are reported for binary mixtures of R-134a, R-1234yf, and R-1234ze(E) refrigerants from 200 to 340 K to pressures of 12 MPa for mixtures containing R-1234yf

Selective C-terminal Conjugation of Trypsin-Digested Peptides for Proteomic Measurements

July 20, 2022
Author(s)
Tian Xie, Alexandria Brady, Cecilia Velarde, David Vaccarello, Nicholas Callahan, John Marino, Sara Orski
Bottom-up proteomic experiments often require selective conjugation or labeling of the N- and/or C-termini of peptides either through bottom up approaches or selective post-cleavage functionalization of specific residues after proteolytic digestion . For

The Expanding Role of National Metrology Institutes in the Quantum Era

July 12, 2022
Author(s)
Alexander Tzalenchuk, Nicolas Spethmann, Tim Prior, Jay H. Hendricks, Yijie Pan, Vladimir Bubanja, Guilherme Temporao, Dai-Hyuk Yu, Damir Ilic, Barbara L. Goldstein
Now that all base units are defined in terms of fundamental constants and can thus — at least in principle — be realized anytime and anywhere, rather than through a measurement chain leading back to unique physical artefacts, who holds the traceability

New Thermodynamic Mixture Models for HFO-containing Blends

July 11, 2022
Author(s)
Ian Bell
With the modern use of fluorinated olefins as refrigerants, there is a pressing need for reference thermodynamic models to design components and cycles. Recent activities at NIST are summarized, including a survey of existing literature data and results

The need for multicomponent gas standards for breath biomarker analysis

July 7, 2022
Author(s)
Kavita Jeerage, Jennifer Berry, Jacolin Murray, Cassie Goodman, Paulina Piotrowski, Christina Jones, Christina Cecelski, Jennifer Carney, Katrice Lippa, Tara Lovestead
Exhaled breath is a non-invasive, information-rich matrix with the potential to diagnose or monitor disease, including infectious disease. Despite significant effort dedicated to biomarker identification in case control studies, very few breath tests are

Unraveling the Stable Cathode Electrolyte Interface in all Solid-State Thin-Film Battery Operating at 5 V

July 4, 2022
Author(s)
Ryosuke Shimizu, Diyi Cheng, Jamie Weaver, Minghao Zhang, Bingyu Lu, Thomas Wynn, Randall Burger, Min-cheol Kim, Guomin Zhu, Ying Shirley Meng
Spinel-type LiNi0.5Mn1.5O4 (LNMO) is one of the most promising 5 V-class cathode materials for Li-ion batteries that can achieve high energy density and low production costs. However, in liquid electrolyte cells, the high voltage causes continuous cell

Heat Capacity Measurements of Conventional Aviation Fuels

June 29, 2022
Author(s)
Tara Fortin, Thomas Bruno
Isobaric specific heat capacities were measured for six conventional petroleum-derived aviation fuel samples: JP-10, JP-7, JP-4, JP-TS, TS-1, and Avgas. All measurements were made using modulated differential scanning calorimetry over the combined

Speed of Sound Measurements of Binary Mixtures of Hydrofluorocarbons [Pentafluoroethane (R-125), 1,1-Difluoroethane (R-152a), or 1,1,1,2,3,3,3-Heptafluoropropane (R-227ea)] with Hydrofluoroolefins [2,3,3,3-Tetrafluoropropene (R-1234yf) or trans-1,3,3,3-Te

June 28, 2022
Author(s)
Aaron Rowane, Richard A. Perkins
Speed of sound data measured using a dual-path pulse-echo instrument are reported for three binary refrigerant mixtures, R-125/1234yf, R-1234yf/152a, and R-1234ze(E)/227ea, at compositions of (0.33/0.67) and (0.67/0.33) mole fraction. The speed of sound

Properties of Refrigerants

June 22, 2022
Author(s)
Marcia L. Huber, Mark O. McLinden
This table gives physical properties, safe exposure limits, GWP and ODP for compounds that have been used as working fluids in traditional refrigeration systems or are under consideration as replacements in newer systems. Some are also used as solvents
Displaying 101 - 125 of 1837