U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Search Publications

NIST Authors in Bold

Displaying 2501 - 2525 of 2755

New NIST-Certified Small Scale Pitch Standard

January 1, 1997
Author(s)
James E. Potzick
The National Institute of Standards and Technology is developing a dimensional pitch standard covering the range 1 ?m to 10 mm, intended for the calibration of microscope magnification and dimensional metrology instrument scales. While NIST has long

On Chip Morphology, Tool Wear and Cutting Mechanics in Finish Hard Turning

January 1, 1997
Author(s)
Matthew A. Davies, Y K. Chou, Christopher J. Evans
Topography of surfaces produced in finish hard turning using cubic boron nitride (CBN) tools is affected by a large number of factors including tool wear and the mechanics of the chip formation process. This paper shows first that tool wear rates are

On the Dynamics of Chip Formation in Machining Hard Metals

January 1, 1997
Author(s)
Matthew A. Davies, Timothy J. Burns, Christopher J. Evans
The results of orthogonal cutting tests on electroplated Nickel-Phosphorus (15% phosphorus) and AISI 52100 bearing steel are presented and compared. For both materials, chips become segmented at relatively low cutting speeds (0.3 m/s to 2 m/s) due to the

Optically Isolated Current to Voltage Converter in an Electron Optics System

January 1, 1997
Author(s)
Alan H. Band, John Unguris
A simple, inexpensive, optically isolated current-to-voltage converter circuit has been developed for the measurement of bipolar currents in the range of 10 pA to 1 %A on the biased elements of an electron optics system at voltages up to 3.5 kV. The design

Pitch and Step Height Measurements Using NIST

January 1, 1997
Author(s)
R Koning, Ronald G. Dixson, Joseph Fu, V W. Tsai, Theodore V. Vorburger, Edwin R. Williams, X Wang
The use of the atomic force microscope (AFM) for step height and pitch measurements in industrial applications is rapidly increasing. To compare the results obtained by different instruments and to achieve high accuracy, the scales of an AFM must be

Results of the NIST National Ball Plate Round Robin

January 1, 1997
Author(s)
Gregory W. Caskey, Steven D. Phillips, Bruce R. Borchardt
This report examines the results of the ball plate round robin administered by NIST. The round robin was part of an effort to assess the current state of industry practices for measurements made using coordinate measuring machines. Measurements of a two

The Calculation of CMM Measurement Uncertainty via The Method of Simulation by Constraints

January 1, 1997
Author(s)
Steven D. Phillips, Bruce R. Borchardt, Daniel S. Sawyer, William T. Estler, David E. Ward, K Eberhardt, M. Levenson, Marjorie A. McClain, B Melvin, Ted Hopp, Y Shen
The calculation of task specific measurement uncertainty when using coordinate measuring machines is an important and challenging task. Current methods to address this issue use simulation techniques (e.g., the virtual CMM) where the propagation of known

The Scanning Electron Microscope

January 1, 1997
Author(s)
Michael T. Postek
The scanning electron microscope (SEM) is an important research and production tool extensively used in many phases of industry throughout the world. The popularity of the instrument results from the need to inspect and obtain information about samples

Tip and Surface Reconstruction in Scanned Probe Microscopy

January 1, 1997
Author(s)
John S. Villarrubia
The non-vanishing size of tips in scanned probe microscopes (e.g., atomic force microscope or scanning tunneling microscope) results in imaging errors. Correction of these errors requires estimation of the tip shape (tip reconstruction) followed by

Is Your Scanning Electron Microscope Hi-Fi?

December 7, 1996
Author(s)
Andras Vladar, Michael T. Postek, S Davilla
The scanning electron microscope (SEM) historically has been used mainly as an image-producing device and, in spite of certain obvious and sometimes serious electronics problems, serves in this function as an acceptable and effective instrument for many

Error Compensation for CMM Touch Trigger Probes

October 1, 1996
Author(s)
William T. Estler, Steven D. Phillips, Bruce R. Borchardt, Ted Hopp, G Witzgall, M Levenson, K Eberhardt, Marjorie A. McClain, Y Shen, X Zhang
We present the analysis of a simple mechanical model of a common type of kinematic seat touch trigger probe widely used on modern coordinate measuring machines (CMMs). The model provides a quantitative description of the pretravel variation or probe-lobing

Stylus-Laser Surface Calibration System

October 1, 1996
Author(s)
Theodore V. Vorburger, Jun-Feng Song, T Giauque, Thomas Brian Renegar, Eric P. Whitenton, M Croarkin
A stylus-laser surface calibration system was developed to calibrate the NIST sinusoidal roughness Standard Reference Materials (SRM) 2071-2075. Step height standards are used to calibrate the stylus instrument in the vertical direction, and a laser

New Certified Length Scale for Microfabrication Metrology

September 1, 1996
Author(s)
James E. Potzick
The National Institute of Standards and Technology is developing a dimensional pitch standard covering the range 1 micrometers to 10 mm, intended for the calibration of microscope magnification and of dimensional metrology instrument scales. Called SRM

Stitching of Equatorial Profiles for Extended Spatial Range Assessment

August 1, 1996
Author(s)
P Sullivan, R E. Parks, Lianzhen Shao
This paper describes a method for stitching multiple overlapping interferometric measurements of the equator of a high quality sphere to produce a single profile representing the roundness of the ball. The resulting optical profile measurement is compared
Displaying 2501 - 2525 of 2755
Was this page helpful?