U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Search Publications

NIST Authors in Bold

Displaying 1701 - 1725 of 13215

Online Measurement for Parameter Discovery in Fused Filament Fabrication

April 3, 2024
Author(s)
Jake Read, Jonathan Seppala, Filippos Tourlomousis, James Warren, Nicole Bakker, Neil Gershenfeld
… machine and material configurations that we tested, even in materials that we had never printed before. Rather than using direct parameters in FFF printing, which is time-consuming to tune and modify, … Integrating Materials and Manufacturing Innovation … Selection, Parameter Transfer, Process Tuning, Additive Manufacturing …

On the Use of Wireless Network Technologies in Healthcare Environments

June 1, 2005
Author(s)
Nicolas Chevrollier, Nada T. Golmie
… In this article, we investigate the suitability of wireless technologies in healthcare/hospital environments. We focus on Wireless Personal Area Network technologies, namely, Bluetooth and the low-rate … On the Use of Wireless Network Technologies in Healthcare Environments …

BACnet(trademark): A Standard Communication Infrastructure for Intelligent Buildings.

January 1, 1997
Author(s)
Steven T. Bushby
… and hampered the development of intelligent building technology. Even though digital automation and control technology has been widely available for more than a decade … Automation in Construction, … buildings, building automation, control network, building technology, communication protocol, direct digital control, …

Measurement Science for 6DOF object pose ground truth

June 28, 2013
Author(s)
Roger D. Eastman, Jeremy Marvel, Joseph Falco, Tsai H. Hong
… Users of perception systems in industrial manufacturing applications need standardized, third party … perception of object pose to six degrees of freedom (6DOF) in X, Y, Z position with roll, pitch and yaw. A standardized …

Broadband transmission filter 2013 OIC manufacturing problem contest

January 10, 2014
Author(s)
Catherine C. Cooksey, Li Li, J. A. Dobrowolski, Michael Jacobson
… filter from 400nm to 1100nm was selected for the manufacturing problem contest. The premise of the contest is … to test the state of the art of current optical thin film manufacturing capabilities. A total 37 people from 15 teams … Broadband transmission filter 2013 OIC manufacturing problem contest …

Material Challenges in Developing a Sustainable Metal Processing Infrastructure - Workshop Report

September 23, 2025
Author(s)
Andrew Iams, James Zuback, Mark Stoudt, Carelyn Campbell
… As metals and manufacturing industries continue to transition towards … draws upon insights acquired from a NIST workshop held in July 2024 that convened experts from government, academia, … engineering (ICME), and digital data infrastructures in accelerating the development of processing pathways and …

AMRF Composite Fabrication Workstation

July 31, 1990
Author(s)
Richard J. Norcross, Robert Bunch, R Kilmer
… International Symposium on Robotics & Manufacturing (ISRAM) … of the IEEE Third International Symposium on Robotics & Manufacturing (ISRAM) …

Stability of Diamond Turning Processes That Use Round Nosed Tools?

February 12, 2001
Author(s)
David E. Gilsinn, B Balachandran, Matthew A. Davies
… In this article, a multi-mode model is developed for a … depth of cut, and spindle speed. The results are presented in the form of stability charts. For round nosed tools, these … submitted to the ASME Journal of Manufacturing Science and Engineering. … Diamond turning, Manufacturing Processes, Process modeling …

Microstrucutral Effects in Precision Hard Turning

January 1, 1996
Author(s)
Y K. Chou, Christopher J. Evans
… Precision hard turning provides an alternative to grinding in some finishing applications. Rapid tool wear, however, … effects on cubic boron nitride (CBN) tool wear in finish hard turning. Results indicate that; 1) carbide … increases with decreasing CBN grain size; and 3) in finish turning with low CBN content tools, the governing …

Characterization of Feedstock in the Powder Bed Fusion Process: Sources of Variation in Particle Size Distribution and the Factors that Influence them

August 10, 2016
Author(s)
Justin G. Whiting, Jason Fox
… have been placed on characterizing and modeling additive manufacturing (AM) processes. The wide scope of work already … methods used at the National Institute of Standards and Technology (NIST) to better understand metal AM powder. These include the striation/separation in transportation and handling, sampling procedures, and the …

Test Beds for Complex Systems

January 1, 2005
Author(s)
Albert T. Jones, A S. Deshmukh
… they have expanded the outsourcing trends that began in the late 1980s. Now, design, engineering and logistics, as … companies all over the world. This expansion has resulted in a new organizational structure called the value chain. The … is crucial for making good decisions at every level in the chain. Many of these decisions are formulated as …

A Feature-Based Machining System Using STEP

November 30, 1998
Author(s)
Frederick M. Proctor, Thomas Kramer
… Discrete part manufacturing flows from a design phase in which product information is defined to a manufacturing phase in which the processes are planned and executed. Process … manufacturing features, numerical control, process planning, …

The NIST Design/Process Planning Integration Project

September 1, 1998
Author(s)
Walter W. Nederbragt, Robert Allen, Shaw C. Feng, Serge Kaing, Ram D. Sriram, Yuyun Zhang
… a description of the National Institute of Standards and Technology (NIST) Design/Process Planning Integration (DPPI) … to link conceptual design ideas to corresponding ones in process planning. After describing the project goals and … planning ones and show that these issues can be re lated in a meaningful way, even at the conceptual level. We …

Traceable Calibration of a Critical Dimension Atomic Force Microscope

June 6, 2011
Author(s)
Ronald G. Dixson, Ndubuisi G. Orji, Craig D. McGray, Jon C. Geist
… The National Institute of Standards and Technology (NIST) has a multifaceted program in atomic force microscope (AFM) dimensional metrology. One … this sort that are commonly encountered in semiconductor manufacturing and other nanotechnology industries. NIST has …

Dimensional Metrology of Bipolar Fuel Cell Plates Using Laser Spot Triangulation Probes

March 22, 2011
Author(s)
Balasubramanian Muralikrishnan, Wei Ren, Dennis S. Everett, Eric S. Stanfield, Theodore D. Doiron
… As in any engineering component, manufacturing a bipolar fuel cell plate for a polymer … stack to within its stated design tolerances is critical in achieving the intended function. In a bipolar fuel cell … Measurement Science and Technology …

Digital Forensics at the National Institute of Standards and Technology

April 9, 2008
Author(s)
James R. Lyle, Douglas R. White, Richard P. Ayers
… underway at the National Institute of Standards and Technology (NIST) Information Technology Laboratory ¿ Software Diagnostics and Conformance … enforcement, and the National Institute of Standards and Technology Office of Law Enforcement Standards (OLES) to … Forensics at the National Institute of Standards and Technology …

Digital Forensics at the National Institute of Standards and Technology

April 1, 2008
Author(s)
James R. Lyle, Douglas R. White, Richard Ayers
… underway at the National Institute of Standards and Technology (NIST) Information Technology Laboratory Software Diagnostics and Conformance … enforcement, and the National Institute of Standards and Technology Office of Law Enforcement Standards (OLES) to … Forensics at the National Institute of Standards and Technology …
Displaying 1701 - 1725 of 13215
Was this page helpful?