Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

5817 Balance and Scale Calibration and Uncertainties

This 4-day seminar will cover the calibration and use of analytical weighing instruments (balances and laboratory/bench-top scales), including sources of weighing errors in analytical environments, methodologies for quantifying the errors, and computation of balance calibration uncertainty and global (user) uncertainty. Attention will be given to error sources, selection of reference standards, and various calibration  procedures used in the weighing industry.  Approximately 50 percent of the time will be spent doing hands-on exercises, calibrating a variety of balances, accumulating data, and developing uncertainty budgets.  The focus will then move to the use of balances in an analytical environment and regulatory environment where compliance with pharmaceutical (FDA/ USP) and international requirements will be discussed and practiced.  Methodologies for process measurement assurance techniques in analytical weighing will also be covered.  Participants will leave with a working skill-set of balance calibration methods, uncertainty estimation, measurement assurance concepts & minimum sample quantity computations that can be applied directly to their calibration and/or use of weighing instruments. This NIST Seminar is designed for beginner to advanced users of balances, metrologists, ISO/IEC 17025 assessors and accreditation bodies, or calibration managers wanting a better understanding of balances and associated uncertainties in organizations where analytical weighing is an integral part of operations. This seminar is limited to 8 participants.  All participants will receive a USB stick with a comprehensive collection of national and international references and documents.

Learning Objectives

At the end of this seminar, using your references and notes, you will be able to:

  • SUMMARIZE the principles and concepts of Measurement Traceability, Measurement Assurance, and Measurement Uncertainty.
  • EXPLAIN the interrelationships between traceability, measurement assurance, and measurement uncertainty.
  • SELECT the appropriate reference standards for the calibration of weighing instruments.
  • SELECT the appropriate international or national method/procedure for the calibration and/or use of weighing instruments in the ISO/IEC 17025 or regulatory environment.
  • DESCRIBE the NIST Eight-Step Process of Measurement Uncertainty Estimation applied to weighing instrument calibration and/or use
  • CONSTRUCT a procedure or outline for a balance calibration.
  • BRAINSTORM, CATEGORIZE, and QUANTIFY potential error sources and uncertainty contributors to weighing devices.
  • DEVELOP a basic uncertainty budget for weighing devices that is validated with the principles of measurement assurance.
  • ESTIMATE the minimum sample quantity for weighing instruments.

Materials & Supplies

All materials and supplies provided by NIST OWM Laboratory Metrology.

Prerequisites

Read Euramet cg-18 before the seminar.

It is also recommended that you complete the Recommended Math Exercises to enhance your participation in the seminar. These topics will be covered during the seminar, however, early review will increase your understanding of the concepts.

Below is a list of video resource's that will be helpful should you need review of the mathematics skills prior to the Balance Calibration & Uncertainty Seminar:

Please make sure you read the NIST Visitor and Contractor Protocols for Mitigating COVID-19 Exposure on NIST Campuses page and complete the Screening Questionnaire before arriving on site.  For more information please visit: www.nist.gov/campus-status

Pre-Work

After reading Euramet cg-18, it will become obvious that knowledge of basic and some advanced mathematics skills are needed to be successful in the Balance Calibration and Uncertainty Seminar. Complete and submit the ‘Required To Know’ math exercises that contain evidence of mathematical skills you must have to be successful in the seminar: There is no planned review of these basic mathematics topics during the seminar.

Submit completed mathematics exercises for which you want feedback to isabel.chavez.baucom [at] nist.gov (isabel[dot]chavez[dot]baucom[at]nist[dot]gov). The provided feedback will let you know which topic areas need some review.

Post-Work

None.

Minimum Requirements

Successful completion requires that participants fully participate in all classroom and laboratory exercises, turn in or present accurate work assignments, and be present for the entire course, in addition to successfully completing the Balance Calibration Mathematical Exercises.

Audience

Successful completion requires that participants fully participate in all classroom and laboratory exercises, turn in or present accurate work assignments, and be present for the entire course, in addition to successfully completing the Balance Calibration Mathematical Exercises.

Cost

The current fee for this seminar is $2,240 and is due by Monday, October 3, 2022. This registration fee does not cover travel, lodging or meal costs. Registration fees for State weights and measures regulatory officials and metrologists are funded by NIST OWM.

Instructors

Micheal Hicks and Mark Ruefenacht
Email: isabel.chavez.baucom [at] nist.gov (isabel[dot]chavez[dot]baucom[at]nist[dot]gov)

Technology Requirements

Laptop with spreadsheet capability and/or scientific calculator strongly encouraged.

Sponsors

NIST Office of Weights and Measures

You will need a government-issued photo ID (e.g., passport or driver's license) when you check into the Visitors Center at the entrance of NIST and, if bringing a vehicle onto the NIST campus, a vehicle registration card.

PLEASE NOTE: Effective July 21, 2014, under the REAL ID Act of 2005, agencies, including NIST, can only accept a state-issued driver's license or identification card for access to federal facilities if issued by states that are REAL ID compliant or have an extension. NIST currently accepts other forms of federally issued identification in lieu of a state-issued driver's license, such as a valid passport, passport card, DOD's Common Access Card (CAC), Veterans ID, Federal Agency HSPD-12 IDs, Military Dependents ID, Transportation Workers Identification Credential (TWIC), and TSA Trusted Traveler ID. See Visitor Information for the latest information.

NIST Visitor and Contractor Protocols for Mitigating COVID-19 Exposure on NIST Campuses page and complete the Screening Questionnaire before arriving on site. 

For more information please visit: https://www.nist.gov/campus-status

Created May 26, 2022, Updated September 21, 2022