Projects/Programs

Displaying 1 - 18 of 18

Additive Manufacturing Part Qualification

Completed

Objective To develop and deploy test methods and protocols, standard test artifacts, exemplar data, data processing tools, and automation tools that create robust post-process measurements and non-destructive testing to enable qualification of AM parts by manufacturers. What is the Problem? To

Audit of EPA Protocol Gas Suppliers

Ongoing

Protocol gas standards are employed in measurements made for compliance purposes; one of the major uses is for measurements of regulated gaseous species from stationary source emitters, i.e., stack gases. Many of these stationary sources are regulated through the Cap and Trade program; therefore

Bioprocess Modeling for Expansion of Cell Culture

Ongoing

One of the most critical steps in bioprocessing is the controlled expansion of frozen cell cultures to generate sufficient cell quantities for manufacturing cell-based products or assay systems. This project focuses on building a scalable model for cell expansion processes that can support the

Consistency Analysis and Uncertainty in ‘omic Data

Ongoing

‘Omics is increasingly moving out of the laboratory and towards use in industrial and commercial applications. For instance, in biomanufacturing, there is a need for quality control when developing biotherapeutics, which will almost certainly require a machine-learning classifier to separate

Cyber-Physical Systems and Internet of Things Foundations

Ongoing

Objective - To provide a common technical and conceptual foundation for CPS and IoT that enables conceptualization, realization and assurance across all domains, including a comprehensive and traceable methodology for meeting all stakeholder concerns throughout any systems engineering process and

Data Driven Decision Support for Additive Manufacturing

Completed

Objective To develop and deploy the metrics, models, and best practices for using product definition, advanced analytics, and machine learning methods in additive manufacturing design and process planning to reduce lead times and support first-part-correct goals. Technical Idea Future advancements

Data Integration and Management for Additive Manufacturing

Completed

Objective Data plays the most critical role in linking AM lifecycle and value chain activities and streamlining the AM development process. While the AM data from a single build is essential for establishing part traceability, when methodically collected, the full processing history of thousands of

Digital Thread for Manufacturing

Ongoing

Purpose and Goals This project will provide research advances in product-definition standardization, conformance testing, and cybersecurity of data assets. Digital thread standards capabilities and infrastructure - Smart connected manufacturing requires the effective communication of the product

Electronic Material Characterization

Ongoing

Manufacturing optimized devices that incorporate newly-emerging materials requires predictable performance throughout device lifetimes. Unexpected degradation in device performance, sometimes leading to failure, is often traceable to poor material reliability. Reliability is rooted in the stability

AM Machine and Process Control Methods for Additive Manufacturing

Completed

Objective Develop algorithms, methods and standard protocols for Additive Manufacturing (AM) process control, and implement it with software and hardware tools for open control of AM systems to enable more flexible process optimization by manufacturers. What is the Technical Idea? Additively

Material Qualification

Ongoing

Objective To develop, utilize, and analyze methods of characterizing the precursor materials in additive manufacturing in both virgin and recycled states with the goal of advancing measurement science to benefit the AM community. The components of principal interest will include the rheological

Metrology for Multi-Physics AM Model Validation

Completed

Objective To provide reference data for the validation of multi-physics models of metal additive manufacturing processes to enable improvement of AM process models and more rapid and predictable process development for AM production by manufacturers. What is the Technical Idea? The Metrology for

Metrology for Real-Time Monitoring of Additive Manufacturing

Completed

Objective To develop and disseminate metrology methods, tools, data, and standards applied to in-situ monitoring of AM processes, such that manufacturers and their customers can accurately and precisely determine the quality of the fabrication process and resulting parts. What is the Technical Idea

NIST PS1 Primary Standard for quantitative NMR (Benzoic Acid)

Completed

With explicit SI linkage, the overall impact of this apical reference material is profound—this primary standard, as well as forthcoming members of its class, provides technology transfer of chemical purity realization to the commercial sector for characterization of many thousands of organic

Photonic Dosimetry

Ongoing

With this effort, NIST is responding to industry needs for traceable, measurement solutions that can resolve spatial variations of absorbed dose at the level of individual components on a silicon wafer or bacteria on surgical instruments. Presently, there is only limited traceability to national

Precursor Material Qualification

Completed

To develop, utilize, and analyze methods of characterizing the precursor materials in additive manufacturing in both virgin and recycled states with the goal of advancing measurement science to benefit the AM community. The components of principal interest will include the rheological, size

Pushing the Limits of Measurement Accuracy in Atom Probe Mass Spectrometry

Ongoing

Isotopic Analysis for Isotopic Geochemistry, Nuclear Safety, and Materials Science : Atom probe tomography has a significant advantage over other forms of mass spectrometry, which typically have a combined efficiency < 5%, in terms of ionization and detection efficiency. Commercial atom probe

Qualification for AM Feedstocks, Machines and Processes

Completed

Objective - To develop, utilize, and analyze test methods and protocols for characterizing the feedstocks, machines, and processes in metal-based additive manufacturing to enable optimum usage and to reduce the cost and time needed for qualification. What is the Technical Idea? Qualification of AM

NIST Headquarters
-Creating Helpful Incentives to Produce Semiconductors for America (CHIPS)
--CHIPS Program Office
---CHIPS Program Headquarters
----CHIPS Program Headquarters - HQ
----Opportunity & Inclusion Group
---External & Government Affairs Division
----External & Government Affairs – HQ
---Investments Division
----Investments Division – HQ
---Operations Office
----Operations Office – HQ
---Risk Management Division
----Risk Management – HQ
---Strategy, Technology & Policy Division
----Strategy, Technology & Policy – HQ
--CHIPS Research & Development Program Office
---CHIPS Research & Development Program Headquarters Division
----CHIPS Research & Development Program Headquarters – HQ
----Integration & Policy Office
----Outreach & Partnerships Office
---External R&D Partnerships Division
----External R&D Partnerships – HQ
----National Advanced Packaging Manufacturing Program Group
----National Semiconductor Technology Center Group
---Industrial Advisory Committee
----Industrial Advisory Committee – HQ
---Semiconductor Manufacturing Institute Division
----Semiconductor Manufacturing Institute – HQ
---Semiconductor Metrology & Characterization Office
----Semiconductor Metrology & Characterization Office – HQ
-Management Resources
--Management Resources
---Associate Director for Management Resources
----Associate Director for Management Resources - HQ
---Business Operations Office
----Business Analytics Group
----Business Operations Office - HQ
----Customer Relationship Management Group
----Process Engineering Office
----Project Management Office
---Emergency Services Office
----Emergency Management, Preparedness and Coordination Group
----Emergency Services - HQ
----Fire Protection Group
----Security Systems and Access Control Group
---Equal Employment Opportunity and Accessibility Office
----Equal Employment Opportunity and Accessibility - HQ
---NIST Research Library and Museum
----NIST Research Library and Museum - HQ
---Fabrication Technology Office
----Fabrication Technology Office - HQ
--Office of Facilities and Property Management
---Boulder Design and Construction Division
----Boulder Design and Construction - HQ
----Facilities Improvement (Boulder) Group
----Reimbursable Work Group
----Facilities Modernization (Boulder) Group
---Gaithersburg Design and Construction Division
----Facilities Improvement (Gaithersburg) Group
----Reimbursable Work (Gaithersburg) Group
----Facilities Modernization (Gaithersburg) Group
----Gaithersburg Design and Construction - HQ
---Gaithersburg Facility Maintenance Division
----Building Management (Gaithersburg) Group
----Operations Engineering Group
----Gaithersburg Facility Maintenance - HQ
----Operations and Maintenance (Gaithersburg) Group
---Facilities Services Division
----Logistics Group
----Materials Management (Gaithersburg) Group
----Site Services Group
----Facilities Services Division - HQ
---Boulder Facilities Maintenance Division
----Site Support Group
----Boulder Facilities Maintenance- HQ
---Office of Facilities and Property Management
----Capital Asset Management and Facilities Planning Group
----OFPM Program Management Office
----Office of Facilities and Property Management - HQ
----Administrative Operations Group
----Safety, Health and Compliance Group
--Office of Acquisition and Agreements Management
---Office of Acquisition and Agreements Management
----Office of Acquisition and Agreements Management - HQ
---Financial Assistance Agreements Management Office
----Financial Assistance Agreements Management Office – HQ
---Acquisition Management Division
----Acquisition Management - HQ
----Acquisition Operations
----Acquisition Operations
----Acquisition Policy and Reimbursable Agreements
--Office of Information Systems Management
---Applications Systems Division
----Applications Systems - HQ
----Business Systems Group
----Custom Applications Development Group
----Data Management & Business Intelligence Group
----Database & Applications Infrastructure Group
----Drupal Development Group
----Identity & Access Management (IDAM) Group
----Institutional Systems Support Group
----OSHE Web Development Group
----Salesforce Development Group
----ServiceNow Development Group
---Research Services Office
----Lab Automation Group
----Research Services Office - HQ
----Scientific Systems Group
---Information Technology Security & Networking Division
----A&A Assessment Group
----A&A Infrastructure Group
----Assessment & Accreditation (A&A) Program
----Embedded IT Security Officer Group
----Information Technology Security & Networking - HQ
----Network Security Group
----Networking Group
----Privacy Group
----Security Implementation & Incident Response Group
----Telecommunications Group
---Customer Access and Support Division
----CASD Boulder Site Support Group
----Customer Access and Support - HQ
----Desktop Support Group
----Embedded Support Group A
----Embedded Support Group B
----Managed Endpoint for MAC & Mobile Group
----Managed Endpoint Windows Group
----Service Desk Operations Group
---Infrastructure Services Division
----Compute & Storage Group
----Computer Facilities Group
----Infrastructure Services Division - HQ
----Security & Monitoring Group
----Unix Hosting Group
----Windows Hosting Group
---Office of Information Systems Management
----Office of Information Systems Management - HQ
----Service & Project Management Group
---Platform Services Division
----Authentication & Directory Services Group
----Collaboration Services Group
----Enterprise Cloud Communications Group
----Enterprise Continuous Diagnostics and Monitoring Group
----Platform Management Group
----Platform Services Division - HQ
--Office of Human Resources Management
---Learning and Organizational Development Division
----Learning and Organizational Development – HQ
---Talent Acquisition Division
----Talent Acquisition – HQ
---Workforce Analytics and Technology Division
----Workforce Analytics and Technology – HQ
---Human Resources Management Office
----Human Resources Management Office - HQ
---Workforce Programs Division
----Workforce Programs – HQ
--Office of Safety, Health and Environment
---Office of Safety, Health and Environment
----Office of Safety, Health and Environment - HQ
---Gaithersburg Safety, Health and Environment Division
----Safety and Health Group
----Gaithersburg Safety, Health and Environment - HQ
----Fire and Facilities Safety Group
----Environmental Management Group
---Radiation Safety Division
----Radiation Facilities Group
----Program Development and Compliance Group
----Radiation Safety - HQ
---Boulder Safety, Health and Environment Division
----Boulder Safety, Health and Environment - HQ
--Office of Financial Resource Management
---Financial Systems and Reporting Division
----CBS Core Support Group
----CBS Feeder System Support Group
----Financial Systems and Reporting Division - HQ
----Financial Statements Group
----Data Control Group
----Reconciliations Group
---Office of Financial Resource Management
----Office of Financial Resource Management - HQ
----Internal Controls Management & Evaluation Office
----Enterprise Risk Management Office
---Financial Operations Division
----Travel Group
----Agreements Group
----Accounts Receivable Group
----Financial Operations - HQ
----Accounts Payable Group
---Budget Division
----Technical and Extramural Programs Group
----Institutional Support and Facilities Group
----Budget - HQ
----Formulation and Financial Management Group
-Laboratory Programs
--Communications Technology Laboratory
---RF Technology Division
----High-Speed Waveform Metrology Group
----Superconductive Electronics Group
----Guided Wave Electromagnetics Group
----Electromagnetic Fields Group
----RF Technology Division - HQ
---Smart Connected Systems Division
----IoT Devices and Infrastructures Group
----Networked Control Systems Group
----Smart Connected Manufacturing Systems Group
----Smart Grid Group
----Transformational Networks and Services Group
---Spectrum Technology and Research Division
----Applied Systems Metrology Group
----Fiber Sources and Applications Group
----Shared Spectrum Metrology Group
----Spectrum Technology and Research – HQ
---Wireless Networks Division
----Internet Technologies Research Group
----Radio Access and Propagation Metrology Group
----Wireless Networks Division - HQ
----Wireless Systems Innovation and Performance Group
---Public Safety Communications Research Division
----Public Safety Communications Research Division - HQ
----Advanced Communications Research Group
----Network Operations Group
---Communications Technology Laboratory HQ
----Communications Technology Laboratory HQ Gp
----Boulder Laboratory Director Office
--Engineering Laboratory
---Building Energy and Environment Division
----Building Energy and Environment - HQ
----Mechanical Systems and Controls Group
----Indoor Air Quality and Ventilation Group
----HVAC&R Equipment Performance Group
----Heat Transfer and Alternative Energy Systems Group
---Intelligent Systems Division
----Intelligent Systems - HQ
----Manipulation and Mobility Systems Group
----Cognition and Collaboration Systems Group
----Production Systems Group
----Sensing and Perception Systems Group
---Materials and Structural Systems Division
----Earthquake Engineering Group
----Engineering Research Support Group
----Infrastructure Materials Group
----Community Resilience Group
----Materials and Structural Systems - HQ
----Structures Group
---Engineering Laboratory Office
----Applied Economics Office
----Disaster Impact Reduction Office
----Engineering Laboratory - HQ
----Engineering Laboratory Data, Security, Technology Group
---Fire Research Division
----National Fire Research Laboratory Group
----Wildland Urban Interface Fire Group
----Flammability Reduction Group
----Fire Research - HQ
----Engineered Fire Safety Group
----Fire Fighting Technology Group
---Systems Integration Division
----Life Cycle Engineering Group
----Process Engineering Group
----Information Modeling and Testing Group
----Systems Integration - HQ
--Information Technology Laboratory
---Applied Cybersecurity Division
----Applied Cybersecurity - HQ
----Cybersecurity and Privacy Applications Group
----National Cybersecurity Center of Excellence
----NICE
---Computer Security Division
----Computer Security - HQ
----Cryptographic Technology Group
----Secure Systems and Applications Group
----Security Components and Mechanisms Group
----Security Test, Validation and Measurement Group
----Security Engineering and Risk Management Group
---Applied and Computational Mathematics Division
----Mathematical Software Group
----Mathematical Analysis and Modeling Group
----Quantum Information Group
----High Performance Computing and Visualization Group
----Applied and Computational Mathematics - HQ
---Statistical Engineering Division
----Applied and Computational Statistics Group
----Statistical Design, Analysis, and Modeling Group
----Statistical Engineering - HQ
---Software and Systems Division
----Systems Interoperability Group
----Software Quality Group
----Software and Systems - HQ
----Cyber Infrastructure Group
----Information Systems Group
---Information Access Division
----Information Access - HQ
----Image Group
----Multimodal Information Group
----Retrieval Group
----Visualization and Usability Group
---Information Technology Laboratory Office
----Office of Computational Science for Metrology
----Office of Emerging Technologies
----Office of IT Standardization
----Office of Government and Industrial Liaison
----Information Technology Laboratory Office - HQ
----Office of Chief Cybersecurity Advisor
--Laboratory Programs
---Research Data and Computing Office
----Research Data and Computing Office – HQ
---Research Protections Office
----Research Protections Office - HQ
---Research Security and Safeguarding Science Office
----Research Security and Safeguarding Science - HQ
---Standards Coordination Office
----International Standards Policy and Coordination Group
----Standards and Conformity Assessment Services Group
----Standards Coordination Office - HQ
----National Voluntary Laboratory Accreditation Program (NVLAP)
---Special Programs Office
----Special Programs Office-HQ
---Associate Director for Laboratory Programs
----Associate Director for Laboratory Programs - HQ
--Material Measurement Laboratory
---Office of Reference Materials
----Business and Quality Management Group
----Business Application Development, Support, and Security Group
----Sales and Customer Services Group
----Publication and Web Services Group
----Office of Reference Materials - HQ
----Materials and Physical Services Group
---Office of Data and Informatics
----Office of Data and Informatics - HQ
----Data Services Group
----Data Sciences Group
---Biosystems and Biomaterials Division
----Biomarker and Genomic Sciences Group
----Cellular Engineering Group
----Biomaterials Group
----Complex Microbial Systems Group
----Cell Systems Science Group
----Biosystems and Biomaterials Division - HQ
---Chemical Sciences Division
----Biochemical and Exposure Science Group
----Chemical Informatics Group
----Optical Measurements Group
----Chemical Process and Nuclear Measurements Group
----Gas Sensing Metrology Group
----Inorganic Chemical Metrology Group
----Biospecimen Science Group
----Chemical Sciences Division - HQ
----Organic Chemical Metrology Group
---Biomolecular Measurement Division
----Biomolecular Structure and Function Group
----Mass Spectrometry Data Center Group
----Bioprocess Measurements Group
----Bioanalytical Science Group
----Biomolecular Measurement Division - HQ
----Applied Genetics Group
---Applied Chemicals and Materials Division
----Applied Chemicals and Materials Division - HQ
----Thermodynamics Research Center Group
----Thermophysical Properties of Fluids Group
----Nanoscale Reliability Group
----Fluid Characterization Group
----Fatigue and Fracture Group
---Materials Science and Engineering Division
----Thermodynamics and Kinetics Group
----Polymers Processing Group
----Mechanical Performance Group
----Polymers and Complex Fluids Group
----Materials Science and Engineering Division - HQ
----Functional Polymers Group
----Functional Nanostructured Materials Group
---Materials Measurement Science Division
----Security Technologies Group
----Surface and Trace Chemical Analysis Group
----Nanomechanical Properties Group
----Nano Materials Research Group
----Materials Structure and Data Group
----Microscopy and Microanalysis Research Group
----Synchrotron Science Group
----Materials Measurement Science Division - HQ
----Data and AI-Driven Materials Science Group
---Material Measurement Laboratory Office
----The Material Measurement Laboratory Office of Operations Group
----Material Measurement Laboratory - HQ
----Genome-Scale Measurement Group
--NIST Center for Neutron Research
---NIST Center for Neutron Research
----Research Facility Operations Group
----NIST Center for Neutron Research - HQ
----Reactor Operations and Engineering Group
----Neutron-Condensed Matter Science Group
--Physical Measurement Laboratory
---Microsystems and Nanotechnology Division
----Biophysical and Biomedical Measurement Group
----Microsystems and Nanotechnology - HQ
----Nanostructure Fabrication and Measurement Group
---Time and Frequency Division
----Atomic Devices & Instrumentation Group
----Precision Photonic Synthesis Group
----Quantum & Nonlinear Nanophotonics Group
----Ion Storage Group
----Neutral Atom Optical Clocks Group
----Time Realization and Distribution Group
----Phase Noise Metrology Group
----Time and Frequency - HQ
---Quantum Physics Division
----Quantum Physics - HQ
---Radiation Physics Division
----Dosimetry Group
----Radioactivity Group
----Radiation Physics - HQ
----Neutron Physics Group
---Sensor Science Division
----Fundamental Thermodynamics Group
----Sensor Science - HQ
----Temperature & Humidity Group
----Remote Sensing Group
----Optical Radiation Group
----Fluid Metrology Group
---Applied Physics Division
----Advanced Microwave Photonics Group
----Spin Electronics Group
----Applied Physics - HQ
----Faint Photonics Group
----Quantitative Nanostructure Characterization Group
----Magnetic Imaging Group
----Quantum Nanophotonics Group
----Sources and Detectors Group
---Quantum Measurement Division
----Quantum Optics Group
----Mass and Force Group
----Quantum Measurement - HQ
----Laser Cooling and Trapping Group
----Fundamental Electrical Measurements Group
----Applied Electrical Metrology Group
----Atomic Spectroscopy Group
---Quantum Sensors Division
----Device Fabrication Group
----Long Wavelength Sensors and Applications Group
----Quantum Calorimeters Group
----Quantum Electronics Group
----Quantum Sensors – HQ
---Nanoscale Device Characterization Division
----Nanoscale Device Characterization Division - HQ
---Physical Measurement Laboratory Office
----Boulder Microfabrication Facility
----Physical Measurement Laboratory- HQ
----PML Information Office
----Office of Weights and Measures
-Innovation & Industry Services
--Office of Advanced Manufacturing
---Microelectronics Manufacturing Division
----Microelectronics Manufacturing – HQ
----Microelectronics Strategy and Enterprise Group
----Semiconductor Coordination Group
----Semiconductor Operations Group
----Workforce and Equity Development Group
---Office of Advanced Manufacturing
----Office of Advanced Manufacturing - HQ
---Partnerships and Outreach Division
----Communications and Marketing Group
----Education and Workforce Development Group
----Partnership Engagement Group
----Partnerships and Outreach – HQ
----Technology Hubs Development Group
---Program Operations Division
----Competitions Group
----Institute and Program Management Group
----Performance Management Group
----Program Operations - HQ
---Strategy and Planning Division
----Analysis and Benchmarking Group
----Strategic Planning Group
----Strategy and Planning – HQ
--Baldrige Performance Excellence Program
---Baldrige Performance Excellence Program Office
----Award Process Group
----Director's Office, Baldrige Performance Excellence Program
----Administrative Support/Electronic Information Group
----Outreach and Communications Group
----Publications Management Group
----Workforce Development Group
--Innovation & Industry Services
---Associate Director for Innovation & Industry Services
----Associate Director for Innovation & Industry Services - HQ
---Technology Partnerships Office
----Technology Partnerships Office - HQ
--Hollings Manufacturing Extension Partnership Program
---National Platforms Division
----National Platforms – HQ
----Network Knowledge Management Group
----Supply Chain Group
---National Programs Division
----National Programs- HQ
---Outreach and External Affairs Division
----Outreach and External Affairs – HQ
---Performance Evaluation and Economic Impacts Division
----Performance Evaluation and Economic Impacts - HQ
----Performance Metrics and Evaluation Group
---Network Agreements Management Division
----Network Agreements Management - HQ
----Node B Group
----Node A Group
---Internal Operations Division
----Internal Operations – HQ
---Hollings Manufacturing Extension Partnership Program Office
----Hollings Manufacturing Extension Partnership Program - HQ
-Director's Office
--Director's Office
---Ombuds Office
----Ombuds Office - HQ
---Public Affairs Office
----Media Liaison Group
----Video and Digital Media Production Group
----Public Affairs Office - HQ
----Internal Communications and Inquiries Group
----Conference Program and Audiovisual Services Group
----Boulder Meetings Support and Services Group
----Web Content Development Group
---Program Coordination Office
----Program Coordination Office - HQ
---Director's Office
----Director's Office - HQ
---Congressional and Legislative Affairs Office
----Congressional and Legislative Affairs Office - HQ
---Management and Organization Office
----Management and Organization Office- HQ
---International and Academic Affairs Office
----International and Academic Affairs Office - HQ