U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Search Publications

NIST Authors in Bold

Displaying 5126 - 5150 of 13218

Computational Characterization of Antibody-Excipient Interactions for Rational Excipient Selection Using the Site Identification by Ligand Competitive Saturation-Biologics Approach

November 2, 2020
Author(s)
Sunhwan Jo
… for rational selection of formulation development. In this study, we demonstrate a general workflow based on the … identification by ligand competitive saturation (SILCS) technology, termed SILCS-Biologics that can be applied to … selection. The National Institute of Standards and Technology monoclonal antibody (NISTmAb) reference along with …

Fluid properties needed in supercritical transesterification of triglyceride feedstocks to biodiesel fuels for efficient and clean combustion - A review*

January 27, 2012
Author(s)
George G. Anitescu, Thomas J. Bruno
… diesel fuels (PDDF) due to overall better performance in the aspects of environment, safety, feedstock, and fuel … Alternatively, has recently been reported a noncatalytic technology based on SC-TE processing of any lipid feedstocks. … products. Based on a technical and economic analysis, the manufacturing cost of biodiesel fuels from a one-step SC-TE …

Real-Time I/O Performance Metrics and Tests for Industrial Ethernet

April 28, 2004
Author(s)
James D. Gilsinn
… (I/O) communication over Ethernet is still fairly new in the industrial environment. There are many questions about … before industrial Ethernet can be utilized in most manufacturing plants. Similar questions are being asked in the information technology (IT) environment now that real-time communications …

Benchmarking of Advanced CD-SEMs Against the New Unified Specification for Sub-0.18 Micrometer Lithography

June 2, 2000
Author(s)
A Deleporte, J Allgair, C Archie, G Banke, Michael T. Postek, J Schlesinger, Andras Vladar, A Yanof
… companies and the National Institute of Standards and Technology have joined to develop a new unified specification … specified to be consistent with the International Technology Roadmap for Semiconductors (ITRS, 1999). Other … have already been adopted by some of the manufacturers in their newer metrology instruments. International SEMATECH …

Fiscal Year 2024 Annual Report for NIST Cybersecurity and Privacy Program

April 28, 2025
Author(s)
Patrick O'Reilly, Kristina Rigopoulos
… 1, 2023, through September 30, 2024 — the NIST Information Technology Laboratory (ITL) Cybersecurity and Privacy Program … responded to numerous challenges and opportunities in security and privacy. This Annual Report highlights the … standards, research and practical applications in several key priority areas (e.g., post-quantum …

Optimality Conditions for Constrained Least Squares Fitting of Circles, Cylinders, and Spheres to Establish Datums

October 10, 2018
Author(s)
Craig M. Shakarji, Vijay Srinivasan
… contacting only two input points. These problems arise in digital manufacturing, where one is confronted with the task of … on manufactured parts. The optimality conditions reported in this paper provide the necessary conditions to verify if a … ASME Journal of Computing and Information Science in Engineering …

Optimality Conditions for Constrained Least-Squares Fitting of Circles, Cylinders, and Spheres to Establish Datums

August 9, 2017
Author(s)
Craig M. Shakarji, Vijay Srinivasan
… contacting only two input points. These problems arise in digital manufacturing, where one is confronted with the task of … on manufactured parts. The optimality conditions reported in this paper provide the necessary conditions to verify if a … Technical Conferences & Computers and Information in Engineering Conference …

Nanomanufacturing: a perspective

February 10, 2016
Author(s)
James A. Liddle, Gregg M. Gallatin
… nanotechnology revolution. Nanomanufacturing processes, in contrast to those used in nanofabrication for research purposes, must satisfy the … time to market. Here, taking silicon integrated circuit manufacturing as a baseline, we consider the factors involved …

The Dimensional Markup Language Specification for Inspection Results Data

October 1, 2009
Author(s)
William G. Rippey
… inspection results for discrete parts. To support manufacturing quality assurance processes, DML results files … (AIAG), this specification applies to a wide range of manufacturing industries and is not limited to automotive … document expected to be ready for ANSI balloting in the fourth quarter of 2009. …

Interoperability Testing for Shop Floor Measurement

December 28, 2007
Author(s)
Frederick M. Proctor, William G. Rippey, John A. Horst, Joseph Falco, Thomas Kramer
Manufactured parts are typically inspected to ensure quality. Inspection involves equipment and software from many different vendors, and interoperability is a major problem faced by manufacturers. The I++ Dimensional Measuring Equipment (DME)

Toward data-driven production simulation modeling: dispatching rule identification by machine learning techniques

June 24, 2019
Author(s)
Satoshi Nagahara, Timothy A. Sprock, Moneer Helu
… managers and some assumptions since those rules are tacit in general. Since operational control rules determine dynamic … systems, it is important to model the rules accurately. In this paper, we consider a data-driven approach for … computational experiments using actual factory data in terms of accuracy and robustness against uncertainty in …

Comparison of Measurements and Simulations for Machining of Aluminum

May 1, 2005
Author(s)
Robert W. Ivester, Eric P. Whitenton, Laurent Deshayes
… been measured using a 3-axis dynamometer. Results reported in this paper are for machining of 7075-T651 Aluminum at a … limitations of experimental measurements and simulations in capturing process behavior. Differences between measurements and simulations are discussed in the context of limitations of simulation fidelity and …

Real-Time Operating System Timing Jitter and its Impact on Motor Control

October 29, 2001
Author(s)
Frederick M. Proctor, William P. Shackleford
… OnTime and RTX for Windows NT. Timing jitter is an issue in these systems, due to hardware effects such as bus … sections, disabled interrupts, and multiple code paths in the scheduler. Jitter is typically on the order of a … operating systems, and ranges from milliseconds to seconds in the worst case for soft real-time operating systems. The …

Dual-beam laser thermal processing of silicon photovoltaic materials

March 14, 2016
Author(s)
Brian J. Simonds, Anthony Teal, Tian Zhang, Joshua A. Hadler, Zibo Zhou, Sergey Varlamov, Ivan Perez-Wurfl
… emitter formation and for drilling holes for drilling in wrap-through style cells. Larger area laser applications are under investigation, for instance in liquid-phase crystallization of thin film Si on glass, … beam power. This readily scalable process is carried out in a matter of tens of seconds for an area around 10 cm2 …

Effect on Flow Stress of a Rapid Phase Transition in AISI 1045 Steel

July 13, 2010
Author(s)
Timothy J. Burns, Steven P. Mates, Richard L. Rhorer, Eric P. Whitenton, Debasis Basak
… model of Jaspers and Dauzenberg for this material in order to obtain improved temperature predictions in finite-element simulations of high-speed machining … ASME 2011 International Manufacturing Science and Engineering Conference … Effect on Flow Stress of a Rapid Phase Transition in AISI 1045 Steel …

Determination of Parametric Uncertainties for Regression-Based Modeling of Turning Operations

May 30, 2006
Author(s)
Robert W. Ivester, Laurent Deshayes, Michael L. McGlauflin, Y Marcon
… of machining performance plays an important role in the application of machining modeling. This paper presents … model development and characterization of the uncertainty in the resulting model parameters. This technique provides a … of machining with an allowance for uncertainty in model-based predictions. The workpiece material, American …

Accreditation Requirements for Quality System Registrars Under Provisions of the Fastener Quality Act

December 1, 1998
Author(s)
S. W. Stiefel, R L. Gladhill
… Act (FQA), P.L. 101-592 (the Act). The Act was amended in 1996 by Section 11 of P.L. 104-113. The Act protects the … by: (1) requiring that certain fasteners which are sold in commerce conform to the specifications to which they are … engaged in fastener testing and registration of manufacturing facilities; and (3) requiring inspection, …

A Preliminary Study of On/Off-Body Propagation Channels for Brain Telemetry Using a Flexible Wearable Antenna

June 20, 2023
Author(s)
Mariella Sarestoniemi, Kamran Sayrafian, Marko Sonkki, Jari Iinatti
… Flexible electronics are envisioned to play a major role in future wearable medical devices. An important component of this technology is flexible antennas. This paper presents a … study of on-body and off-body propagation channels in Body Area Networks (BAN) using a small Ultra WideBand …

Module-Lattice-Based Digital Signature Standard

August 13, 2024
Author(s)
National Institute of Standards and Technology (NIST), Thinh Dang, Jacob Lichtinger, Yi-Kai Liu, Carl Miller, Dustin Moody, Rene Peralta, Ray Perlner, Angela Robinson
… National Institute of Standards and Technology (NIST), Thinh Dang , Jacob Lichtinger , Yi-Kai Liu …
Displaying 5126 - 5150 of 13218
Was this page helpful?