Search Publications

NIST Authors in Bold

Displaying 1501 - 1525 of 1910

A Reference Material for Evaluation of Cs-137 Radiochronometric Measurements

August 16, 2018

Author(s)

Kevin B. Lavelle, Richard Essex, Jeffrey T. Cessna, Kevin P. Carney, Cole R. Hexel

… counting) and the evaluated half-life of 137Cs, (30.05 ± 0.08) a. The 137Ba* molality of (1.546 ± 0.024) nmol …

In Situ Nanoscale Characterization of Water Penetration through Plasma Polymerized Coatings

August 1, 2018

Author(s)

Yang Zhou, Brian Patrick Josey, Emmanuel Anim-Danso, Brian B. Maranville, Jenia Karapetrova, Zhang Jiang, Qixin Zhou, Ali Dhinojwala, Mark D. Foster

… after one day in salt spray, while a similarly thin (30 nm) pp-HMDSO coating protects an Al panel for a period on …

Characteristics of Firebrands Collected from Actual Urban Fires

July 9, 2018

Author(s)

Samuel L. Manzello, Sayaka Suzuki

… 120 of 147 destroyed. The fire was extinguished more than 30 h later. During the fire, firebrands were observed and 10 …

Machine learning modeling of superconducting critical temperature

June 28, 2018

Author(s)

Aaron Gilad Kusne, Valentin Stanev, Ichiro Takeuchi

… (ICSD) for potential new superconductors. We identify > 30 non-cuprate and non-iron-based oxides as candidate …

Beta-Bond Scission and the Yields of H and CH3 in the Decomposition of i-Butyl Radicals

May 8, 2018

Author(s)

Laura A. Mertens, Jeffrey A. Manion

… respectively. Propene was the main product, approximately 30 times more abundant than i-butene, indicating that C-C β- …

MMSE-based analytical estimator for uncertain power system with limited number of measurements

February 2, 2018

Author(s)

Hamid Gharavi, Hasnae Bilil

… guaranteed convergence. MSE has been tested using IEEE 14, 30, 39 and 118 bus models for different measurement …

Ion-Gel-Gating-Induced Oxygen Vacancy Formation in Epitaxial La 0.5Sr d0.5^CoO^d3-d Films from in operando X-ray and Neutron Scattering

December 19, 2017

Author(s)

Jeff Walter, Guichuan Yu, Biqiong Yu, Alexander Grutter, Brian Kirby, Julie Borchers, Zhan Zhang, Hua Zhou, Turan Birol, Martin Greven, Chris Leighton

… vacancies proliferate through the entire thickness of 30-40-unit-cell-thick films, quantitatively accounting for …

A measurement technique for infrared emissivity of epoxy-based microwave absorbing materials

December 4, 2017

Author(s)

Derek A. Houtz, Dazhen Gu

… carbonyl iron powder concentrations of 0%, 5%, 10%, 20%, 30%, and 50% by tap volume. We use a commercial infrared …

Evaluation of Wind Pressure Coefficients on Low-Rise Building Enclosures Using Modern Wind Tunnel Data

December 1, 2017

Author(s)

Dat Duthinh, Matthew L. Gierson, Philip N. Bryan, Bilal Ayyub

… are developed from wind tunnel test data that date back 30 to 50 years. In recent decades, advances in pressure …

In-operando Multi-scale X-ray Characterization of the Microstructural and Structural Changes in Na- and Ca-Montmorillonite on Heating to 1150 degC

May 15, 2017

Author(s)

Greeshma Gadikota, Fan Zhang, Andrew J. Allen

… changes in Na- and Ca-montmorillonite on heating from 30 °C to 1150 °C. Larger cations such as Ca2+ confer more …

Conformational Changes in Active and Inactive States of Human PP2C? characterized by Hydrogen/Deuterium Exchange-Mass Spectrometry

May 8, 2017

Author(s)

Sharlyn Mazur, Elyssia S. Gallagher, Subrata Debnath, Stewart R. Durell, Kyle Anderson, Lisa M. Jenkins, Ettore Appella, Jeffrey W. Hudgens

… rigid state over the catalytically relevant time scale of 30-300 s. Submillimolar Mg2+ concentrations or introduction …

DART-MS analysis of inorganic explosives using high temperature thermal desorption

May 4, 2017

Author(s)

Thomas P. Forbes, Edward R. Sisco, Matthew E. Staymates, John G. Gillen

… corresponding to signal-to-noise ratios in the range of 30 to 40. DOE also identified JHTD filament current and …

In Situ Nanoscale Observations of Gypsum Dissolution by Digital Holographic Microscopy

April 17, 2017

Author(s)

Pan Feng, Alexander Brand, Lei Chen, Jeffrey W. Bullard

Recent studies of topographical changes during dissolution at gypsum crystal surfaces focus on the formation and growth of etch pits because dissolution both parallel and normal to the surface is much faster at etch pits than at defect-free portions of the

Application of computational thermodynamics to the design of a Co-Ni-based ?-strengthened superalloy

March 13, 2017

Author(s)

Eric Lass

A currently available commercial Calphad thermodynamic database was utilized to investigate its applicability to alloy design in the new class of Co-Ni-based -strengthened high temperature alloys. A simple primary design criterion was chosen: maximize

High Performance Tribology Systems: Design Consideration

February 19, 2017

Author(s)

Stephen M. Hsu

… 15 years life, yet because of longer life span we enjoy, a 30 years joint replacement technology is needed. In all these …

Fast Formation of Low-Defect-Density Tethered Bilayers by Fusion of Multilamellar Vesicles

January 10, 2017

Author(s)

Tadas Ragaliauskas, Mindaugas Mickevicius, Bozena Rakovska, Tadas Penkauskas, Frank Heinrich, Gintaras Valincius

… removed by a single rinse of the tethered construct with 30% ethanol solution. Fast assembly and low residual defect …

Robust evaluation of statistical surface topography parameters using focus-variation microscopy

September 19, 2016

Author(s)

Erich N. Grossman, Martin Gould, Natalie P. Mujica-Schwahn

… errors without applying the protocol are a minimum of 30% even at the absolute optimum autocorrelation length. …

Code-division-multiplexed readout of large arrays of TES microcalorimeters

September 15, 2016

Author(s)

Kelsey M. Morgan, Bradley K. Alpert, Douglas A. Bennett, William B. Doriese, Joseph W. Fowler, Johnathon D. Gard, Gene C. Hilton, Kent D. Irwin, Young Il Joe, Galen C. O'Neil, Carl D. Reintsema, Edward V. Denison, Daniel R. Schmidt, Joel N. Ullom, Daniel S. Swetz

… array has mean energy resolution of 2.77 +/- 0.02 eV over 30 working sensors. The readout channels are sampled …

Raman analysis of bond conformations in the rotator and premelting states of normal alkanes

May 9, 2016

Author(s)

Anthony P. Kotula, Angela R. Hight Walker, Kalman D. Migler

… the Raman determined amorphous mass fraction of (10 to 30)% in the rotator phase greatly exceeds the IR determined …

The importance of exposure dose in communicating the ecotoxicology of engineered nanomaterials

November 20, 2015

Author(s)

Thomas A. Duster

… use similarly low exposure doses. In fact, a survey of 30 well-cited nTiO2 ecotoxicology papers found that only 22 …

Long Term Air Quality Monitoring in a Net-Zero Energy Residence Designed with Low Emitting Interior Products

August 21, 2015

Author(s)

Dustin G. Poppendieck, Lisa C. Ng, Andrew K. Persily, Al Hodgson

… Indoor and outdoor concentrations of formaldehyde and 30 other VOCs were measured approximately monthly during the …

Free Space Microwave Non Destructive Characterization of Composite Materials

May 4, 2015

Author(s)

Jan Obrzut, Ahmed M. Hassan, Edward J. Garboczi

… materials. The system operates in the Q- frequency band of 30 GHz to 50 GHz with fixed wave propagation distance between …

Mapping Monoclonal Antibody Structure by 2D 13C NMR at Natural Abundance

March 1, 2015

Author(s)

Luke Arbogast, Robert G. Brinson, John Marino

… can be rapidly acquired in as short as approximately 30 min. …

Electrodeposition of Al-W Alloys in the Lewis Acidic Aluminum Chloride-1-Ethyl-3-Methylimidazolium Chloride Ionic Liquid

April 24, 2014

Author(s)

Tetsuya Tsuda , Yuichi Ikeda , Takashi Arimura, Masaki Hirogaki, Akinito Imanishi, Susumu Kuwabata, Gery R. Stafford, Charles Hussey

… However, as the W content of these alloys increased above 30 a/o, the deposits became powdery and friable and were …

Acoustic and electrical properties of Ca3TaGa3Si2O14 piezoelectric resonators at elevated temperatures

November 3, 2013

Author(s)

Ward L. Johnson, Michal Schulz, Holger Fritze

… acoustic resonators with a crystal orientation of (YXl) -30° are investigated at the fundamental mode of 5 MHz and …

Advanced communications
-Open Radio Access Network (Open-RAN)
-Quantum communications
-Spectrum sharing
-Wireless (RF)
Artificial intelligence
-AI measurement and evaluation
-Autonomous systems
--Automated vehicles
--Autonomous laboratories
-Applied AI
-Fundamental AI
-Hardware for AI
-Machine learning
-Trustworthy and responsible AI
Bioscience
-Bioeconomy
--Biological data
-Bioimaging
-Bioinformatics
-Biomanufacturing
-Biomaterials
-Biometrology
-Biosecurity
--Biosurveillance
--Genomic cybersecurity
--Nucleic acid sequence screening
-Cell measurements
-Engineering / synthetic biology
--Biofabrication
--Cell-free systems
--Genome engineering
--Protein engineering
-Gene delivery systems
-Genome editing
-Genomics
-Glycomics
-Metabolomics
-Microbial measurements
-Proteomics
Buildings and Construction
-Building codes and standards
-Building control systems
-Building damage and repair
-Building economics
-Building materials
-Energy efficiency
-Heating, ventilation and air conditioning equipment
-Indoor air quality
-Structural engineering
-Thermal comfort
Chemistry
-Analytical chemistry
-Chemical engineering and processing
-Chemical thermodynamics and chemical properties
-Molecular characterization
-Theoretical chemistry and modeling
-Thermochemical properties
Electronics
-Electromagnetics
-Flexible electronics
-Magnetoelectronics
-Optoelectronics
-Organic electronics
-Semiconductors
-Sensors
-Superconducting electronics
Energy
-Alternative energy
-Conventional energy
-Electric power / smart grid
-Fuels
Environment
-Air / water / soil quality
-Climate Measurements
-Environmental health
-Greenhouse gas measurements
-Marine science
-Sustainability
Fire
-Fire detection
-Fire dynamics and science
-Fire fighting
-Fire modeling
-Fire risk reduction
-Materials flammability
-Structural fire resistance
-Wildland urban interface fire
Forensic Science
-Digital evidence
-Drugs and toxicology
-Firearms and toolmarks
-Forensic biometrics
-Forensic genetics
-Trace evidence
Health
-Biopharmaceuticals
-Cell and gene therapy
-Clinical diagnostics
--Cancer
--Medical imaging
-Food and nutrition
-Human microbiome
-Precision medicine
-Regenerative medicine and advanced therapy
--Flow cytometry
Information technology
-Biometrics
-Cloud computing and virtualization
-Complex systems
-Computational science
-Conformance testing
-Cyber-physical systems
--Smart cities
-Cybersecurity and privacy
--Cryptography
--Cybersecurity education and workforce development
--Cybersecurity measurement
--Identity and access management
--Privacy engineering
--Risk management
--Securing emerging technologies
--Trustworthy networks
--Trustworthy platforms
-Data and informatics
--Human language technology
--Information retrieval
--Natural language processing
-Digital twins
-Federal information processing standards (FIPS)
-Health IT
-Internet of Things (IoT)
-Interoperability testing
-Location based services
-Mobile
-Networking
--Mobile and wireless networking
--Network management and monitoring
--Network modeling and analysis
--Network security and robustness
--Network test and measurement
--Next generation networks
--Protocol design and standardization
--Software defined and virtual networks
-Software research
--Software testing
-Usability and human factors
--Accessibility
-Video analytics
-Virtual / augmented reality
-Visualization research
-Voting systems
Infrastructure
Manufacturing
-Additive manufacturing
-Factory communications
-Factory operations planning and control
-Interoperability in manufacturing
-Machining
-Manufacturing economics
-Manufacturing quality assurance
-Manufacturing systems design and analysis
-Monitoring, diagnostics and prognostics
-Process improvement
-Process measurement and control
-Product data
-Robotics
--Agility and adaptability
--Collaborative robots
--Dexterous grasping
--Manipulation
--Mobility and industrial autonomous vehicles
--Navigation / actuation / control
--Sensing and perception
-Supply chain
-Sustainable manufacturing
-Systems engineering
-Systems integration
-Technology commercialization
Materials
-Ceramics
-Composites
-Concrete / cement
-Materials characterization
--Composition and structure
--Mechanical properties
--Thermal properties
-Metals
-Modeling and computational material science
-Polymers
-Superconductors
Mathematics and statistics
-Experiment design
-Image and signal processing
-Modeling and simulation research
-Numerical methods and software
-Statistical analysis
-Uncertainty quantification
Metrology
-Amount of substance
-Dimensional metrology
-Electrical / electromagnetic metrology
-Flow metrology and rheology
-Force metrology
-Humidity metrology
-Ionizing radiation metrology
-Mass metrology
-Metric
-Optical / photometry / laser metrology
-Pressure and vacuum metrology
-Thermometry metrology
-Time and frequency metrology
-Weights and measures
Nanotechnology
-Nanobiotechnology
-Nanochemistry
-Nanoelectronics
-Nanofabrication / manufacturing
--Lithography
--Self-assembly
-Nanofluidics
-Nanomagnetics
-Nanomaterials
-Nanomechanics
-Nanometrology
-Nanophotonics
-Nanophysics
-Nanoplasmonics
Neutron research
Performance excellence
-Assessment tools and services
-Baldrige award
-Baldrige examiners
-Baldrige Framework and Criteria
-Best practices
-Leadership development
Physics
-Atomic / molecular / quantum
-Biological physics
-Condensed matter
-Electron physics
-Magnetics
-Nuclear physics
-Optical physics and communications
-Quantum information science
-Radiation
-Spectroscopy
-Thermodynamics
-Time and frequency
Public safety
-Chemical / Biological / Radiological / Nuclear / Explosives (CBRNE)
-First responder preparedness
-Law enforcement
-Public safety communications research
-Response robots
Resilience
-Community resilience
--Recovery
--Resilience metrics
-Disaster and failure studies
-Earthquake risk reduction
-Resilience economics
-Resilient materials
-Windstorm impact reduction
Standards
-Accreditation
-Calibration services
-Conformity assessment
-Documentary standards
-Frameworks
-Quality assurance
-Reference data
-Reference instruments
-Reference materials
-Standards education
Technology transfer
Transportation
-Aerospace
-Automotive