U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Search Publications

NIST Authors in Bold

Displaying 6726 - 6750 of 73829

UE-to-Network Relay Model B Discovery in ProSe-Enabled LTE Networks

April 6, 2021
Author(s)
Alexandre C. Moreaux, Samantha Gamboa Quintiliani, David W. Griffith, Richard A. Rouil
In this paper, we expand previous analytical models to offer a more complete representation of Model B ProSe direct discovery. Using these models, we can obtain performance metrics such as the average time a given Remote User Equipment (UE) takes to

Accurate Gain Measurement Technique for Limited Antenna Separations

April 5, 2021
Author(s)
Ben Jamroz, Antonius van den Biggelaar, S J. Geluk, Dylan Williams, A. B. Smolders, U. Johannsen, Laurens A. Bronckers
The Friis equation is often used to determine the gain of antennas but assumes that far-field (FF) conditions are met. For limited antenna separations on the order of the Fraunhofer distance, its use requires a precise estimate of the amplitude centers of

CCM pilot study overview: geometrical measurement of the Rockwell diamond indenter

April 5, 2021
Author(s)
Renato R. Machado, Samuel Low, Alessandro Germak
This paper describes an overview of the capability of the NMIs that participated on the CCM Pilot Study measurement systems, conducted by the CIPM/CCM/Working Group on Hardness, to characterize the Rockwell hardness diamond indenter geometry, by measuring

Estimations of the effective Young's modulus of specimens prepared by fused filament fabrication

April 5, 2021
Author(s)
Lichen Fang, Yishu Yan, Ojaswi Agarwal, Jonathan Seppala, Kalman D. Migler, Thao D. Nguyen, Kevin Hemker, Sung Hoon Kang
The elastic response of homogeneous isotropic materials is most commonly represented by their Young's modulus (E), but geometric variability associated with additive manufacturing results in materials that are neither homogeneous nor isotropic. Here we

2p x-ray absorption spectroscopy of 3d transition metal systems

April 3, 2021
Author(s)
Eric L. Shirley, John Vinson, Frank de Groot, Hebatalla Elnaggar, Federica Frati, Ru-pan Wang, Mario Delgado, Michel van Veenendaal, Maurits Haverkort, Robert Green, Yaroslav Kvashnin, Atsushi Hariki, Harry Ramanantoanina, Claude Daul, Bernard Delley, Michael Odelius, Marcus Lundberg, Oliver Kuhn, Sergey Bokarev, Keith Gilmore, Mauro Stener, Giovanni Fronzoni, Piero Decleva, Peter Kruger, Marius Retegan, Javier Fernandez-Rodriguez, Gerritt van der Laan, Yves Joly, Christian Vorwerk, Claudia Draxl, John Rehr, Arata Tanaka, Hidekazu Ikeno
A variety of methods are presented that are presently used to treat x-ray absorption spectra of transition-metal 2p edges in a wide range of compounds. Different methods include different methods of chemical realism versus featuring the simplifications of

Recovering the Key from the Internal State of Grain-128AEAD

April 3, 2021
Author(s)
Donghoon Chang, Meltem Sonmez Turan
Grain-128AEAD is one of the second-round candidates of the NIST lightweight cryptography standardization process. There is an existing body of third-party analysis on the earlier versions of the Grain family that provide insights on the security of Grain

Data Reduction Tool for Spherical Constant Volume Flame Experiments

April 2, 2021
Author(s)
Michael Hegetschweiler, Gregory T. Linteris
A data reduction tool was developed to conveniently post-process spherical constant volume flame experiments. Such experiments are employed to obtain laminar flame velocities in a premixed gas mixture. The setup is relatively simple and the only recorded

Improving Automated Insertion Task in Robotics by Reducing Registration Error

April 2, 2021
Author(s)
Geraldine S. Cheok, Marek Franaszek, Karl Van Wyk, Jeremy Marvel
A peg-in-hole operation is representative of common tasks performed in assembly lines by robots. It requires registration of the coordinate frame where a part resides to the robot frame. Poor registration causes misalignment of the peg and the hole which

NIST Test Personal Identity Verification (PIV) Cards Version 2

April 2, 2021
Author(s)
David Cooper
In order to facilitate the development of applications and middleware that support the Personal Identity Verification (PIV) Card, NIST has developed a set of test PIV Cards and a supporting public key infrastructure (PKI). This set of test cards includes

Recalibration Intervals for Radiation Detection Instruments

April 2, 2021
Author(s)
Leticia Pibida, Ben Estes, Manuel Mejias, Gladys Klemic
In this work we provide a summary of the National Conference of Standards Laboratories (NCSL) Recommended Practice RP-1 calibration interval analysis method, and examples of the method applied to three sets of available NIST data (two models of radiation

A Spin Hamiltonian for BaCdVO(PO 4 ) 2

April 1, 2021
Author(s)
V. K. Bhartiya, S. Hayashida, K. Yu. Povarov, Z. Yan, Yiming Qiu, S. Raymond, A. Zheludev
Single crystal inelastic neutron scattering is used to study spin wave excitations in the fully polarized state of the frustrated quantum ferro-antiferromagnet BaCdVO(PO 4) 2. The data analysis is based on a Heisenberg spin Hamiltonian that includes as

Development of an LC-MS/MS Reference Method for the Standardization of Analytical Methods to Measure Lipoprotein(a) in Plasma

April 1, 2021
Author(s)
Santica Marcovina, Noemie Clouet-Foraison, Marlys Koschinsky, Mark Lowenthal, Michael Boffa, Andrew Hoofnagle, Tomas Vaisar
Background: Use of Lipoprotein(a) levels for identification of individuals at high risk for cardiovascular disease is hampered by the high size polymorphism of apolipoprotein(a) which strongly impacts immunochemical methods resulting in discordant values

Evidence Against Carbonization of the Thin-Film Filters of the Extreme Ultraviolet Variability Experiment onboard the Solar Dynamics Observatory

April 1, 2021
Author(s)
Charles Tarrio, Robert F. Berg, Thomas B. Lucatorto, Andrew Jones, Frank Eparvier, Brian Templeman, Donald Woodraska, Marie Dominique
In spite of strict limits on outgassing from organic materials, some spacecraft instruments making long-term measurements of solar extreme ultraviolet (EUV) radiation still suff er signi cant degradation. While such measures have reduced the rate of

Experimental study of shear and tensile properties of LIGA Ni-Fe and Ni-Co alloys at quasi-static and intermediate strain rates

April 1, 2021
Author(s)
Li-Anne Liew, David T. Read, May Martin, Todd R. Christenson, Peter E. Bradley, Nicholas Barbosa, Frank W. DelRio, John T. Geaney, Jeffrey Smyth
We report the in-plane shear properties, to fracture, of 200 um-thick LIGA nanocrystalline Ni- 10%Fe and micrograined Ni-10%Co. Planar simple shear specimens were designed, fabricated and pulled to fracture using a miniature commercial tension test stage

Facile fabrication and characterization of kraft lignin@Fe3O4 nanocomposites using pH driven precipitation: effects on increasing lignin content

April 1, 2021
Author(s)
Frankie A. Petrie, Justin Gorham, Robert T. Busch, Serhiy O. Leontsev, Esteban E. Urena-Benavides, Erick S. Vasquez
Kraft lignin@Fe3O4 multicore nanocomposites fabrication proceeded using a simple pH-driven precipitation technique. An alkaline solution for kraft lignin (pH 12) was rapidly injected into an aqueous-based magnetite (Fe3O4) nanoparticle colloidal suspension
Displaying 6726 - 6750 of 73829
Was this page helpful?