Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Metrology of Scattering with Angular Limitation Projection Electron Lithography Masks

Published

Author(s)

J E. Liddle, M Blakey, T Saunders, R Farrow, L Fetter, C Kneurek, R Kasica, et al, M Peabody, Shannon L. Takach, D L. Windt, Michael T. Postek

Abstract

Mask metrology is a vital part of any lithographic technology, both for control of the mask patterning process and also for ensuring that the contribution of the mask to the system error budget is within acceptable limits. For design rules of 0.13 ?m and below, errors arising from metrology must be kept to less than 1 nm. We have examined the potential for achieving this, in the case of scattering with angular limitation projection electron lithography (SCALPEL) masks, by using high-energy (100 keV) electron transmission measurements. We have also performed extensive metrology using conventional scanning electron microscope techniques. These results show that the SCALPEL mask has the potential to meet the specifications necessary for lithography at the 0.13 ?m generation and beyond.
Citation
Journal of Vacuum Science and Technology B
Volume
15(6)

Keywords

lithographic technology, mask metrology, mask patterning process

Citation

Liddle, J. , Blakey, M. , Saunders, T. , Farrow, R. , Fetter, L. , Kneurek, C. , Kasica, R. , al, E. , Peabody, M. , Takach, S. , Windt, D. and Postek, M. (1997), Metrology of Scattering with Angular Limitation Projection Electron Lithography Masks, Journal of Vacuum Science and Technology B (Accessed March 28, 2024)
Created November 1, 1997, Updated January 27, 2020