Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

High Temperature Materials for Thin-Film Thermocouples on Silicon Wafers

Published

Author(s)

Kenneth G. Kreider, John G. Gillen

Abstract

We Have developed an instrumented calibration wafer for radiometric temperature measurements in rapid thermal processing (RPT) tools for semiconductor processing. The instrumented wafers have sputter deposited thin-film thermocouples to minimize the thermal disturbance of the wafer by the sensors. The National Institute of Standards and Technology (NIST) calibration wafer also employs platinum-palladium wire thermocouples to achive a combined standard uncertainty of 0.4 C in the temperature measurement of the thin-film thermocouples junction at 900 C. The high temperatures of the wafer has required the development of new thin-film material systems. We have reported the results of our testing and characterization of sputtered platinum, palladium, rhodium, and iridium thin films using titanium bond coats on thermally oxidized silicon wafers. Depth profiling with secondary ion mass spectrometry was used to determine the diffusion profiles from the metal film to the silicon after heat treatments as high as 100 C. Electron microscopy and optical microscopy were used to follow the reactions and the deterioration of the thermoelectric films. In addition, performance tests up to 1000 C in the NIST RTP test bed were used to determine the stability of the material systems. Failure mechanisms and limitations of the thin-film thermocouple materials have been discussed with data on hysteresis and drift in thermometry performance. The results of our evaluations indicated that Rh/Ir thin-film thermocouples have the best properties for wafer temperatures above 900 C.
Citation
Thin Solid Films
Volume
376
Issue
No. 1-2

Keywords

iridium, palladium, platinum, rapid thermal processing, sputtered thin-films, temperature calibration, thin-film thermocouples

Citation

Kreider, K. and Gillen, J. (2000), High Temperature Materials for Thin-Film Thermocouples on Silicon Wafers, Thin Solid Films, [online], https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=830660 (Accessed April 26, 2024)
Created November 1, 2000, Updated February 17, 2017