U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Materials / Materials characterization

Mechanical properties

Tools and Instruments

Displaying 1 - 12 of 12
Hysitron PI-85 Picoindentor

Hysitron PI-85 Picoindentor

This in-situ indentation system can be integrated into electron microscopes as well as being run in other unusual setups. With a load capacity of 150 mN, this
xform

NCAL: Cruciform Test Machine

A cruciform test machine is available in the NIST Center for Automotive Lightweighting. This machine deforms a cross-shaped specimen with four specimen end tabs
Marciniak Schematic

NCAL: Forming Limit Press

A forming limit press is available in the NIST Center for Automotive Lightweighting. This machine has been designed based on a modified Marciniak punch

NCAL: Octostrain Test Machine

An octostrain (8 tensile arms) test machine is available in the NIST Center for Automotive Lightweighting. By increasing the number of arms from the four used
Tension compresion fixturing with upper and lower loadcells and grips and lateral anti-buckling guides with pneumatic actuators

NCAL: Tension-Compression Test Machine

A uniaxial sheet tension-compression test machine is available in the NIST Center for Automotive Lightweighting. This machine provides additional constraints to

NCAL: Thermal Imaging Systems

Thermal imaging systems are available in the NIST Center for Automotive Lightweighting. These cameras can be used to measure adiabatic heating during mechanical

NCAL: Uniaxial Test Machines

A variety of uniaxial test machines are available in the NIST Center for Automotive Lightweighting. These include servo-hydraulic and screw-driven test frames
Rubber Process Analyzer

Rubber Process Analyzer

The TA Instruments RPA elite rubber process analyzer (RPA) is a strain-controlled rotational shear rheometer for the characterization of polymers, composites
Was this page helpful?