Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Comparison of the NIST and PTB Standards for Air Kerma and Low-Energy X-rays

Published

Author(s)

C M. O'Brien, L. Buermann

Abstract

A comparison has been made of the air-kerma standards for low-energy x-rays at the National Institute of Standards and Technology (NIST) and the Physikalisch-Technische Bundesanstalt (PTB). The comparison involved a series of measurements at the PTB and the NIST using the air-kerma standards and two NIST reference-class transfer ionization chamber standards. Results are presented for the reference beam qualities in the range from 25 kV to 50 kV for the low energy x-rays, including the techniques used for mammography dose traceability. The tungsten generated reference radiation techniques between 25 kV to 50 kV used for this comparison are new to NIST; therefore this comparison will serve as the preliminary comparison for NIST and a verification of the primary standard correction factors. The mammography comparison will repeat two previously unpublished comparisons between PTB and NIST. The results show the standards to be in reasonable agreement within the standard uncertainty of the comparison of about 0.4 %.
Citation
Journal of Research (NIST JRES) -
Volume
114

Keywords

air kerma, free-air ionizaton chamber, primary standards, reference radiation qualities, x-rays

Citation

O'Brien, C. and Buermann, L. (2009), Comparison of the NIST and PTB Standards for Air Kerma and Low-Energy X-rays, Journal of Research (NIST JRES), National Institute of Standards and Technology, Gaithersburg, MD, [online], https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=903376 (Accessed April 19, 2024)
Created December 31, 2009, Updated February 19, 2017