Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Fiber Deflection Probe for Small Hole Metrology

Published

Author(s)

Balasubramanian Muralikrishnan, Jack A. Stone Jr., John R. Stoup

Abstract

This paper presents the development of a new probing method for Coordinate Measuring Machines (CMM) to inspect diameter and form of small holes. The technique, referred to as fiber deflection probing, can be used for holes of approximately 100 mm nominal diameter. The expanded uncertainty obtained using this method is 0.07 mm (k = 2) on diameter. The probing system consists of a transversely illuminated fiber (with a ball mounted on the end) whose shadows are imaged using a camera. This method of shadow imaging provides the magnitude of fiber deflection which is then used to correct final machine coordinates to obtain coordinates on the surface. In this paper, we describe the measurement principle and provide an analysis of the imaging process. Subsequently we discuss data obtained from characterization and validation experiments. Finally we present results from small hole measurements and provide an uncertainty budget for diameter measurements.
Citation
J. International Societies for Precision Engineering and Nanotechnology
Volume
30
Issue
2

Keywords

coordinate metrology, fiber probe, microfeature metrology, small hole

Citation

Muralikrishnan, B. , Stone, J. and Stoup, J. (2006), Fiber Deflection Probe for Small Hole Metrology, J. International Societies for Precision Engineering and Nanotechnology, [online], https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=822250 (Accessed March 29, 2024)
Created January 1, 2006, Updated February 19, 2017