IACET CEUs Offered: 4.5
Class Number: 5515
Class size Min/Max: 9 / 12
Cancellation: We reserve the right to cancel any workshops if we do not receive sufficient registrations. Please register early and do not make any confirmed travel bookings until the course has been confirmed.
Event Time: 8:30 a.m. to 5:00 p.m. Eastern Time
Registration Deadline: Wednesday, January 10, 2018
Before you request training, you must first establish an account in the Office of Weights and Measures Contacts System. The following is a list of helpful instructions.
- Quick Guide for OWM Contacts System
- How to Reset Password Using the Contacts System
- How to Request Training & Transcript Using the Contacts System-PDF
- How to Request Publications using OWM Contacts System
PLEASE NOTE, your request to establish an account will be processed within one business day. At that time, you will be sent a password, which will enable you to register for training in the Contacts System. If you have any questions, contact Isabel Chavez at 301-975-2128
The Fundamentals of Metrology seminar introduces participants to the concepts of measurement systems, units, measurement uncertainty, measurement assurance, traceability, basic statistics and how they fit into a laboratory Quality Management System. Additional topics covered will include overall Laboratory Management and Laboratory Quality Management Systems as well as specific discussions of the requirements for proficiency testing, calibration certificate generation, software verification and validation and management reviews. Topics will be covered using a variety of measurement disciplines and case studies so that the participants will be able to apply the concepts to any measurement discipline upon completion. Topics are covered in a mixture of training styles including lecture, hands-on exercises, case studies and discussion.
At the end of this seminar, participants will be able to:
- IDENTIFY and USE reference materials to ensure good quality, accurate, traceable measurement results;
- EXPLAIN highlights and key concepts of each topic (noted on the Table of Contents and the detailed learning objectives ) to each other and to your managers and show how these topics fit in to a management system using ISO/IEC 17025 as the basis.
- Have and know how to IMPLEMENT several simple tools, job aids, and references to use and improve your laboratory operations.
Materials & Supplies:
A number of notebooks and course materials will be provided.
Required prerequisites include having a demonstrated knowledge of basic mathematics (pre-test) and completion of a number of reading assignments.
In addition to completing and submitting the Math Exercises, please read:
- NPL Beginner’s Guide to Measurement (link is external)
- Beginner's Guide to Measurement in Mechanical Engineering (link is external)
- ISO/IEC 17025 (either the standard itself, or versions available in NIST Handbook 143 - Program Handbook)
- For reference, download NIST Special Publication 811 “Guide for the Use of the International System of Units (SI)”
Submit the math exercises (pre-work) according to instructions by COB on Monday, January 22, 2017.
Fundamentals of Metrology, Laboratory Auditing Program (LAP) Problems – required for State Weights and Measures Laboratories (not applicable for other participants.)
Successful completion requires that participants fully participate in all classroom and laboratory exercises, turn in or present accurate work assignments, and be present for the entire course. There will also be a Final Exam on the last day of the class. The Final Exam and Final Calibration Certificate each contribute equal value to the final grade; the final grade also includes class participation and laboratory exercises. A passing grade on all portions is required to obtain a training certificate that indicates “successful completion” (e.g., getting a 100 percent on the final will not be an excuse to participate minimally in classroom and laboratory.) Successful completion qualifies the participant to participate in the Mass, Volume and Length seminars, though those may have additional prerequisites.
*Homework note: students generally report taking one to two hours for homework each night.
State laboratory personnel who have responsibilities for developing, implementing, and/or improving the quality management system in their laboratory as well as those who are seeking OWM recognition and/or accreditation or improvements to support recognition/accreditation. This course is also available for non-weights and measures participants.
The current fee for this seminar is $2,200 and confirmed participants will be sent payment instructions. This fee does not cover travel, lodging or meal expenses. Payment is due Monday, February 12, 2018. Registration fees for State weights and measures regulatory officials and metrologists are funded by NIST OWM.
Office of Weights and Measures
Phone: (301) 975 - 4014
You will need to bring a 10-digit scientific calculator to use during this seminar. Participants MUST be familiar with the use of the hand-held scientific calculator. Additionally, use of a laptop or tablet PC is required to succeed in the seminar. Participants must have access to Microsoft Word and Excel (version 2010 or newer are acceptable) and be able to open and use template Excel workbooks that will be provided on either CD-ROM or USB media. You must also be able to save/store files to USB media devices or CD-RW to facilitate printing. Internet access is not provided during the seminar.
NIST Office of Weights and Measures
You will need a government-issued photo ID (e.g., passport or driver's license) when you check into the Visitors Center at the entrance of NIST on Monday morning. If you will be driving, please bring your Vehicle Registration card also.
PLEASE NOTE: Effective July 21, 2014, under the REAL ID Act of 2005 (http://www.dhs.gov/real-id-public-faqs (link is external)), agencies, including NIST, can only accept a state-issued driver's license or identification card for access to federal facilities if issued by states that are REAL ID compliant or have an extension. NIST currently accepts other forms of federally issued identification in lieu of a state-issued driver's license, such as a valid passport, passport card, DOD's Common Access Card (CAC), Veterans ID, Federal Agency HSPD-12 IDs, Military Dependents ID, Transportation Workers Identification Credential (TWIC), and TSA Trusted Traveler ID. See Visitor Information for the latest information.