NOTICE: Due to a lapse in annual appropriations, most of this website is not being updated. Learn more.

Form submissions will still be accepted but will not receive responses at this time. Sections of this site for programs using non-appropriated funds (such as NVLAP) or those that are excepted from the shutdown (such as CHIPS and NVD) will continue to be updated.

U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Material Measurement Laboratory / Materials Science and Engineering Division

Mechanical Performance Group

Tools and Instruments

Displaying 1 - 9 of 9
2 meter diameter horizontal mechanical test machine with control computers

NCAL: Cruciform Test Machine

A cruciform test machine is available in the NIST Center for Automotive Lightweighting. This machine deforms a cross-shaped specimen with four specimen end tabs
Marciniak Schematic

NCAL: Forming Limit Press

A forming limit press is available in the NIST Center for Automotive Lightweighting. This machine has been designed based on a modified Marciniak punch

NCAL: Octostrain Test Machine

An octostrain (8 tensile arms) test machine is available in the NIST Center for Automotive Lightweighting. By increasing the number of arms from the four used
Tension compresion fixturing with upper and lower loadcells and grips and lateral anti-buckling guides with pneumatic actuators

NCAL: Tension-Compression Test Machine

A uniaxial sheet tension-compression test machine is available in the NIST Center for Automotive Lightweighting. This machine provides additional constraints to

NCAL: Thermal Imaging Systems

Thermal imaging systems are available in the NIST Center for Automotive Lightweighting. These cameras can be used to measure adiabatic heating during mechanical

NCAL: Uniaxial Test Machines

A variety of uniaxial test machines are available in the NIST Center for Automotive Lightweighting. These include servo-hydraulic and screw-driven test frames
Was this page helpful?