Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

X-ray Computed Tomography Data of Additive Manufacturing Metrology Testbed (AMMT) Parts: "Overhang Part X4"

Published

Author(s)

Maxwell Praniewicz, Brandon Lane, Felix Kim, Christopher Saldana

Abstract

This document provides details on the data and files generated from post-build X-ray computed tomography (XCT) measurements of the four parts built as part of the "Overhang Part X4" dataset. The "Overhang Part X4" dataset was a three-dimensional (3D) additive manufacturing (AM) build performed on the Additive Manufacturing Metrology Testbed (AMMT) by Ho Yeung and Brandon Lane on June 28, 2019. The files discussed in this document include image sequences for each part, stereolithography-files (.STL) of the surface data extracted from XCT. This data is one of a set of "AMMT Process Monitoring Datasets," as part of the Metrology for Real- Time Monitoring of Additive Manufacturing project at the National Institute of Standards and Technology (NIST).
Citation
Journal of Research (NIST JRES) -
Volume
125

Keywords

Additive Manufacturing, Laser Powder Bed Fusion, X-ray Computed Tomography

Citation

Praniewicz, M. , Lane, B. , Kim, F. and Saldana, C. (2020), X-ray Computed Tomography Data of Additive Manufacturing Metrology Testbed (AMMT) Parts: “Overhang Part X4”, Journal of Research (NIST JRES), National Institute of Standards and Technology, Gaithersburg, MD, [online], https://doi.org/10.6028/jres.125.031, https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=930955 (Accessed October 13, 2024)

Issues

If you have any questions about this publication or are having problems accessing it, please contact reflib@nist.gov.

Created September 30, 2020, Updated October 12, 2021