A Proposed Interim Check for Field Testing a Laser Tracker's 3-D Length Measurement Capability Using a Calibrated Scale Bar as a Reference Artifact

Published

October 1, 2014

Author(s)

Vincent Lee, Christopher J. Blackburn, Balasubramanian Muralikrishnan, Daniel Sawyer, Mark Meuret, Aaron Hudlemeyer

Abstract

This paper describes a proposed interim check for field testing a laser tracker's 3-D length measurement capability using a calibrated scale bar as a reference artifact. The tests described here are constructed to be sensitive to uncompensated errors in length measurement caused by the imperfect geometry and optical misalignments in the laser tracker's construction. The collection of tests described in this paper was specifically selected to be sensitive to all of the error sources described in the NIST, and Loser and Kyle's laser tracker error models. Consequently, successful field test results obtained using the methods described here should provide operators with confidence that the instrument will perform within the required specification in the field. These tests are not a test of the tracker's ranging system, which is assumed to be individually calibrated and is used to establish metrological traceability per ASME B89.7.5 of the reference lengths described in this paper. To be of practical use to laser tracker users, the tests are constructed to be quick (less than 30 minutes) and easy to perform in the field while still providing a thorough evaluation of the instrument's length measurement performance. This paper describes an analytic method for selecting specific field tests, proposes a collection of field tests, and presents a method for displaying and analyzing the measurement data.

Citation

NIST Interagency/Internal Report (NISTIR) - 8016

Report Number

8016

NIST Pub Series

NIST Interagency/Internal Report (NISTIR)

Pub Type

NIST Pubs

Download Paper

https://doi.org/10.6028/NIST.IR.8016

Local Download

Keywords

dimensional, metrology, laser tracker, scale bar, manufacturing, inspection, quality, aerospace, ship building, large scale dimensional metrology, large volume metrology, large scale coordniate metrology, coordinate metrology

Citation

Lee, V. , Blackburn, C. , Muralikrishnan, B. , Sawyer, D. , Meuret, M. and Hudlemeyer, A. (2014), A Proposed Interim Check for Field Testing a Laser Tracker’s 3-D Length Measurement Capability Using a Calibrated Scale Bar as a Reference Artifact, NIST Interagency/Internal Report (NISTIR), National Institute of Standards and Technology, Gaithersburg, MD, [online], https://doi.org/10.6028/NIST.IR.8016, https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=916126 (Accessed May 9, 2026)

Additional citation formats