Sanders, A.
, Schumann, T.
, Gu, D.
, Forsyth, M.
and Lu, X.
(2026),
Noise Based Power Calibration Techniques for Mid-band Radio Frequency Sensors, Technical Note (NIST TN), National Institute of Standards and Technology, Gaithersburg, MD, [online], https://doi.org/10.6028/NIST.TN.2391, https://nps-ext.nist.gov/nps/nps_public_api/api/Publication/file/962894 (Accessed November 3, 2026)
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Noise Based Power Calibration Techniques for Mid-band Radio Frequency Sensors
Published
Author(s)
, Todd Schumann, , ,
Abstract
This technical report details approaches to the amplitude calibration and noise character- ization of frequency dependent power detection in the 1-6 GHz range using noise with a known power spectral density. The noise is generated by a commercial off the shelf noise diode or a programmable noise source. The construction and characterization of the programmable noise source is covered. In addition, results from an extended large scale sensor deployment monitoring the electromagnetic environment in the 3550 - 3700 MHz range are presented.Citation
Technical Note (NIST TN) - 2391
Report Number
2391
NIST Pub Series
Pub Type
NIST Pubs
Download Paper
Keywords
Advanced Communications,CBRS,CBSD,DPA,ESC,GAA,NASCTN,PALS,RADAR,SAS,Sharing Ecosystem Assessment
Citation
Issues
If you have any questions about this publication or are having problems accessing it, please contact [email protected].
Created October 13, 2026