Larson, D.
and Paulter, N.
(2001),
The Effects of Offset Voltage on the Amplitude and Bandwidth of Kick-Out Pulses Used in the Nose-To-Nose Sampler Impulse Response Characterization Method, IEEE Transactions on Instrumentation and Measurement, [online], https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=32031
(Accessed October 27, 2025)
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
The Effects of Offset Voltage on the Amplitude and Bandwidth of Kick-Out Pulses Used in the Nose-To-Nose Sampler Impulse Response Characterization Method
Published
Author(s)
,
Abstract
The amplitude and bandwidth of kick-out pulses used in the nose-to-nose sampler impulse response characterization method were measured as a function of offset voltage. The measuring instrument was of similar bandwidth and its effects on the measurement were not removed. The amplitude is almost linear for offset voltages from -500 mV to 500 mV, except for values from about -50 mV to 50 mV. Slight changes in bandwidth were observed for offset voltages from -250 mV to 250 mV with significant bandwidth loss observed for offset voltages outside this range.Citation
IEEE Transactions on Instrumentation and Measurement
Volume
50
Issue
4
Pub Type
Journals
Download Paper
Keywords
high-speed samplers , impulse response , sampling , oscilloscopes , waveform spectrum
Citation
Issues
If you have any questions about this publication or are having problems accessing it, please contact [email protected].
Created July 31, 2001, Updated October 12, 2021