A Macro-Micro Motion System for a STM

Published

June 13, 2002

Author(s)

Bradley N. Damazo, James D. Gilsinn, Richard M. Silver, Hui Zhou

Abstract

As nano-lithography improves, more companies and research groups have the capability to create nano-scale structures. Scanning Tunneling Microscopes (STMs) are commonly used to create these structures and evaluate them afterward. One difficulty is that these nano-structures are difficult to find on a centimeter size die cut from a silicon wafer without very specialized hardware and post-processing and analysis. NIST is conducting research into developing a macro-micro motion system that would allow these nano-structures to be more easily identified on the die. An XY stage system using linear piezo actuators will perform the macro motion by moving the sample to where the STM tip can scan a particular region of the die to make an analysis. The STM tip would then perform the micro motion by scanning the region for the nano-structure. A vibration isolation system is needed for this macro-micro motion system using single or double springs and eddy current dampers. This vibration isolation system will isolate the entire system from the outside world and the individual components from each other. Along with the motion systems described above, a high-precision interferometer system will be installed to independently monitor a flexure driven stage for the STM tip. A graphical programming system has been developed for controlling the motion of the STM tip. All of these systems - the macro-micro motion system, the vibration isolation system, the interferometer system, and the graphical programming system - combine to form the initial steps toward coordinated closed-loop control of the STM.

Conference Dates

June 9-13, 2002

Conference Location

Orlando, FL, USA

Conference Title

World Automation Congress (WAC) 2002 as Part of the International Symposium on Robotics & Applications (ISORA)

Pub Type

Conferences

Download Paper

Local Download

Keywords

graphical programming, interferometer, macro-micro motion, nano-lithography, nano-manufacturing, STM, vibration isolation

Citation

Damazo, B. , Gilsinn, J. , Silver, R. and Zhou, H. (2002), A Macro-Micro Motion System for a STM, World Automation Congress (WAC) 2002 as Part of the International Symposium on Robotics & Applications (ISORA), Orlando, FL, USA, [online], https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=821683 (Accessed April 24, 2024)