Modeling and Measuring the Effects of Portable Gasoline Powered Generator Exhaust on Indoor Carbon Monoxide Level

Published

March 18, 2013

Author(s)

Steven J. Emmerich, Andrew K. Persily, Wang Liangzhu

Abstract

The U.S. Consumer Product Safety Commission (CPSC) is concerned about the hazard of acute residential carbon monoxide (CO) exposures from portable gasoline powered generators that can result in death or serious and/or lasting adverse health effects in exposed individuals. As an initial approach to characterizing these hazards, CPSC measured the emissions from generators by testing them in a small test chamber (Brown 2006). CPSC subsequently contracted with the University of Alabama (UA) to develop and construct low CO-emission prototype generators using off-the-shelf technologies installed on commercially-available portable generators. Under an interagency agreement with CPSC, NIST conducted a series of tests to characterize the indoor time course profiles of CO concentrations resulting from portable generators operating in the attached garage of a home under various use and environmental conditions, to evaluate the performance of low CO-emission prototype generators, and to provide model validation data. The data was also used as input to a simulation analysis conducted to examine the potential performance of the low CO-emission prototypes under a wider range of operating conditions.

Citation

Technical Note (NIST TN) - 1781

Report Number

1781

NIST Pub Series

Technical Note (NIST TN)

Pub Type

NIST Pubs

Download Paper

DOI Link

Keywords

carbon monoxide, CONTAM, exposure, indoor air quality, health, measurements, multizone airflow model, simulation

Citation

Emmerich, S. , Persily, A. and Liangzhu, W. (2013), Modeling and Measuring the Effects of Portable Gasoline Powered Generator Exhaust on Indoor Carbon Monoxide Level, Technical Note (NIST TN), National Institute of Standards and Technology, Gaithersburg, MD, [online], https://doi.org/10.6028/NIST.TN.1781 (Accessed October 28, 2025)