Dzugan, J.
and Lucon, E.
(2024),
ASTM interlaboratory study on tensile testing of AM deposited and wrought steel using miniature specimens, Theoretical and Applied Fracture Mechanics, [online], https://doi.org/10.1016/j.tafmec.2024.104410, https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=957836 (Accessed April 25, 2026)
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
ASTM interlaboratory study on tensile testing of AM deposited and wrought steel using miniature specimens
Published
Author(s)
Jan Dzugan,
Abstract
An interlaboratory study, involving eigth international laboratories and coordinated by COMTES FHT (Czech Republic), was conducted to validate tensile measurements obtained using miniature specimens on additively manufactured (AM) components and artifacts. In addition to AM 316L stainless steel (316L SS), a wrought high-strength steel (34CrNiMo6V, equivalent to AISI 4340) was also used. Based on the results, a precision statement in accordance with ASTM E691 standard practice was developed, intended for inclusion in a proposed annex to the ASTM E8/E8M tension testing method. The primary outcomes of the study highlighted the agreement between yield and tensile strength measured from miniature and standard-sized tensile specimens. Furthermore, most tensile properties exhibited similar standard deviations, offering users insight into the efficacy of miniature specimen applications.Citation
Theoretical and Applied Fracture Mechanics
Volume
131
Pub Type
Journals
Download Paper
Keywords
316L stainless steel, additive manufacturing, high-strength steel, miniature specimens, tensile tests
Citation
Issues
If you have any questions about this publication or are having problems accessing it, please contact [email protected].
Created April 3, 2024, Updated May 1, 2024