NOTICE: Due to a lapse in annual appropriations, most of this website is not being updated. Learn more.
Form submissions will still be accepted but will not receive responses at this time. Sections of this site for programs using non-appropriated funds (such as NVLAP) or those that are excepted from the shutdown (such as CHIPS and NVD) will continue to be updated.
An official website of the United States government
Here’s how you know
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Simulation and Analysis Plan to Evaluate the Impact of CO Mitigation Requirements for Portable Generators
Published
Author(s)
Steven J. Emmerich, Brian J. Polidoro, Matthew J. Brookman, Janet Buyer, Matthew Hnatov
Abstract
This report was written by staff of the National Institute of Standards and Technology (NIST) and the U.S. Consumer Product Safety Commission (CPSC, the Commission) under an interagency agreement1 in support of the Commissions effort to address the carbon monoxide (CO) poisoning hazard associated with consumer use of portable generators. This report presents staffs plan for evaluating the effectiveness of CO mitigation requirements that were adopted in two voluntary standards in 2018. These two standards are ANSI/PGMA G300-2018, Safety and Performance of Portable Generators (referred to as PGMA G300) and ANSI/UL 2201-2018, Carbon Monoxide (CO) Emission Rate of Portable Generators (referred to as UL 2201). Both voluntary standards have requirements for a system that will shut the generator off when specific CO concentrations are present near the generator. PGMA G300 also has notification requirements to alert the user of the presence of CO after the generator has shut off. UL 2201 does not have a notification requirement but has a reduced CO emission rate requirement. PGMA G300 does not have a reduced CO emission requirement.
Emmerich, S.
, Polidoro, B.
, Brookman, M.
, Buyer, J.
and Hnatov, M.
(2019),
Simulation and Analysis Plan to Evaluate the Impact of CO Mitigation Requirements for Portable Generators, Technical Note (NIST TN), National Institute of Standards and Technology, Gaithersburg, MD, [online], https://doi.org/10.6028/NIST.TN.2048
(Accessed October 6, 2025)