The Journal of Research of NIST and its predecessors report NIST research and development in metrology and related fields of: physical science, engineering, applied mathematics, statistics, biotechnology, information technology.
For additional information see: About the Journal
Volume 66C | ISSN: 0022-4316 |
Issue 1 | Issue 2 |
Issue 3 | Issue 4 |
Reference tables for 40 percent iridium-60 percent rhodium versus iridium thermocouples, p. 1
Blackburn, G. F.; Caldwell, F. R.
http://dx.doi.org/10.6028/jres.066C.001
A method for the self-calibration of attenuation-measuring systems, p. 13
Peck, Robert L.
http://dx.doi.org/10.6028/jres.066C.002
Special shielded resistor for high-voltage d-c measurements, p. 19
Park, J.H.
http://dx.doi.org/10.6028/jres.066C.003
Voltage ratio measurements with a transformer capacitance bridge, p. 25
Zapf, Thomas L.
http://dx.doi.org/10.6028/jres.066C.004
Weight calibration schemes for two knife-edge direct-reading balances, p. 33
Almer, H.E.; Macurdy, L.B.; Peiser, H.S.; Weck, E.A.
http://dx.doi.org/10.6028/jres.066C.005
Tunnel diode large-signal equivalent circuit study and the solutions of its nonlinear differential equations, p. 45
Geller, Sidney B.; Mantek, Paul A.
http://dx.doi.org/10.6028/jres.066C.006
A missile technique for the study of detonation waves, p. 51
Ruegg, F. W.; Dorsey, W. W.
http://dx.doi.org/10.6028/jres.066C.007
Creep of cold-drawn nickel, copper, 70 percent nickel-30 percent copper, and 30 percent nickel-70 percent copper alloys, p. 59
Jenkins, William D.; Willard, William A.
http://dx.doi.org/10.6028/jres.066C.008
Effect of vibration and shock on unsaturated standard cells, p. 85
Brodd, Ralph J.; Eicke, Jr., Woodward G.
http://dx.doi.org/10.6028/jres.066C.009
Experiments on the burning of cross piles of wood, p. 99
Gross, D.
http://dx.doi.org/10.6028/jres.066C.010
Transfer of NBS X-ray beam calibrations, p. 107
Pruitt, J.S.; Allisy, A.; Joyet, G.; Pohlit, W.; Tubiana, M.; Zupancic, C.
http://dx.doi.org/10.6028/jres.066C.011
Identification of metallurgical reactions and their effect on the mechanical properties of 17-7 PH stainless steel, p. 113
Burnett, H.C.; Duff, R.H.; Vacher, H.C.
http://dx.doi.org/10.6028/jres.066C.012
The ideal Lovibond color system, p. 121
Judd, Deane B.; Chamberlin, G.J.; Haupt, Geraldine W.
http://dx.doi.org/10.6028/jres.066C.013
Systems of electrical units, p. 137
Silsbee, Francis B.
http://dx.doi.org/10.6028/jres.066C.014
Measurement of longitudinal spherical aberration in the extra-axial region of lenses, p. 185
Washer, Francis E.; Darling, Walter R.
http://dx.doi.org/10.6028/jres.066C.015
Spark-gap flashover measurements for steeply rising voltage impulses, p. 197
Park, J.H.; Cones, H.N.
http://dx.doi.org/10.6028/jres.066C.016
Evaporated-film electric hygrometer elements, p. 209
Jones, Frank E.
http://dx.doi.org/10.6028/jres.066C.017
Methods of measuring the resistivities of anisotropic conducting media in situ, p. 217
Rush, Stanley
http://dx.doi.org/10.6028/jres.066C.018
Corrosion of steel pilings in soils, p. 223
Romanoff, Melvin
http://dx.doi.org/10.6028/jres.066C.019
Corrosion rates of ferrous alloys (Fe-Cr and Fe-Cr Si) measured by polarization technique, p. 245
Schwerdtfeger, W. J.
http://dx.doi.org/10.6028/jres.066C.020
Furnace for thermocouple calibrations to 2200°, p. 255
Thomas, Douglas B.
http://dx.doi.org/10.6028/jres.066C.021
Total hemispherical emittance of coated and uncoated Inconel and types 321 and 430 stainless steel, p. 261
Richmond, Joseph C.; Harrison, William N.
http://dx.doi.org/10.6028/jres.066C.022
Mail Separator control computer preliminary logical design, p. 271
Henig, Seymour; Palasky, Ervin C.
http://dx.doi.org/10.6028/jres.066C.023
Method of measuring emissivities of metals m the infrared, p. 283
Maki, Arthur G.; Pyler, Earle K.
http://dx.doi.org/10.6028/jres.066C.024
An ultra-high speed image dissecting camera for photographing strong shock waves, p. 297
Earnshaw, Kenneth B.; Benedict, Charles M.
http://dx.doi.org/10.6028/jres.066C.025
Biprism method of determining the equivalent focal length of flat field lenses, p. 313
Darling, Walter R.
http://dx.doi.org/10.6028/jres.066C.026
Effect of air drag on the motion of a filament struck transversely by a high-speed projectile, p. 317
McCrackin, Frank L.
http://dx.doi.org/10.6028/jres.066C.027
A precision noise spectral density comparator, p. 323
Allred, C.M.
http://dx.doi.org/10.6028/jres.066C.028
Stresses in a plate uniformly compressed over portions of its two opposite edges, p. 331
Chi, M.; Kroll, W. D.
http://dx.doi.org/10.6028/jres.066C.029
Studies of the stress -corrosion cracking of low-carbon steels, p. 347
Logan, Hugh L.
http://dx.doi.org/10.6028/jres.066C.030
A dual centrifuge for generating low-frequency sinusoidal accelerations, p. 357
Smith, R.O.; Willis, E.A.; Hilten, J.S.
http://dx.doi.org/10.6028/jres.066C.031
Rotational micromanometers, p. 363
Lofquist, Karl
http://dx.doi.org/10.6028/jres.066C.032
Study of gypsum plasters exposed to fire, p. 373
Ryan, J.V.
http://dx.doi.org/10.6028/jres.066C.033