Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Thermography of Single Line Scans Performed on the Commercial Powder Bed Fusion Machine for the Additive Manufacturing Benchmark Test Series (AM-Bench 2018)

Published

Author(s)

Jarred C. Heigel

Abstract

This document provides details on the files available in the dataset "In situ thermographic measurements of single line scans performed for the Additive Manufacturing Benchmark Test Series (AM-Bench 2018)." These measurements are performed as part of the Additive Manufacturing Benchmark Test Series (AMBench) supporting the melt pool geometry (length) and cooling rate challenges (CHAL-AMB2018-02-MP-Length and CHAL-AMB2018-02-CR). The following sections provided details on the experiments and data files.
Citation
Advanced Manufacturing Series (NIST AMS) - 100-53
Report Number
100-53

Keywords

Additive Manufacturing, Thermography, Melt pool length, Cooling rate, AM Bench, Benchmark data, Dataset

Citation

Heigel, J. (2023), Thermography of Single Line Scans Performed on the Commercial Powder Bed Fusion Machine for the Additive Manufacturing Benchmark Test Series (AM-Bench 2018), Advanced Manufacturing Series (NIST AMS), National Institute of Standards and Technology, Gaithersburg, MD, [online], https://doi.org/10.6028/NIST.AMS.100-53 (Accessed December 6, 2024)

Issues

If you have any questions about this publication or are having problems accessing it, please contact reflib@nist.gov.

Created June 27, 2023