Report on the May 2016 ASTM E57.02 instrument runoff at NIST, Part 2 - NIST realization of test procedures and uncertainties in the reference lengths

Published

October 19, 2016

Author(s)

Balasubramanian Muralikrishnan, Prem K. Rachakonda, Katharine M. Shilling, Vincent D. Lee, Christopher J. Blackburn, Daniel S. Sawyer, Geraldine S. Cheok, Luc Cournoyer

Abstract

There is ongoing activity within ASTM E57.02 working group WK43218 [1] to develop a documentary standard for point-to-point distance performance evaluation of 3D imaging systems. The Dimensional Metrology Group (DMG) at the National Institute of Standards and Technology (NIST) has established facilities to realize all of the test procedures in the current draft. Part 1 [2] of this two-part report presented background information and key findings from an instrument runoff hosted by the DMG in support of this effort. This report (Part 2) describes test facilities established by the DMG, calibration procedures, validation data, and uncertainty budgets.

Citation

NIST Interagency/Internal Report (NISTIR) - 8153

Report Number

8153

NIST Pub Series

NIST Interagency/Internal Report (NISTIR)

Pub Type

NIST Pubs

Download Paper

DOI Link

Keywords

3D imaging system, ASTM E57, dimensional metrology, performance evaluation

Citation

Muralikrishnan, B. , Rachakonda, P. , Shilling, K. , Lee, V. , Blackburn, C. , Sawyer, D. , Cheok, G. and Cournoyer, L. (2016), Report on the May 2016 ASTM E57.02 instrument runoff at NIST, Part 2 - NIST realization of test procedures and uncertainties in the reference lengths, NIST Interagency/Internal Report (NISTIR), National Institute of Standards and Technology, Gaithersburg, MD, [online], https://doi.org/10.6028/NIST.IR.8153 (Accessed February 14, 2025)