Skip to main content
U.S. flag

An official website of the United States government

Effects of the Incorporation of Municipal Solid Waste Incineration Fly Ash in Cement Pastes and Mortars. II: Modeling

Published

Author(s)

S Remond, Dale P. Bentz, M. Pimpinella

Abstract

This work falls within the scope of a general problem of the assessment of concretes manufactured from waste materials. The main objective is to study the long-term evolution of these materials during leaching using the cellular automata- based hydration model developed at the National Institute of Standards and Technology (NIST). The work is based on the analysis of mortars and cement pastes containing an experimental waste: Municipal Solid Waste Incineration fly ash (MSWI fly ash). After having determined the mineralogical composition of the MSWI fly ash and its interactions with cement during hydration, presented previously as Part 1, the phases comprising the fly ash have been incorporated into the hydration model. The increase in porosity of cement pastes containing MSWI fly ash during leaching has then been simulated. Finally, a simplified leaching model has been developed to study the influence of the changes in microstructure on the release of calcium and sodium.
Citation
Cement and Concrete Research
Volume
32
Issue
No. 4

Keywords

blended cements, building technology, durability, fly ash, hydration, microstructure, modelling, waste materials

Citation

Remond, S. , Bentz, D. and Pimpinella, M. (2002), Effects of the Incorporation of Municipal Solid Waste Incineration Fly Ash in Cement Pastes and Mortars. II: Modeling, Cement and Concrete Research, [online], https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=860294 (Accessed December 14, 2024)

Issues

If you have any questions about this publication or are having problems accessing it, please contact reflib@nist.gov.

Created March 31, 2002, Updated October 12, 2021