Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Design, Measurements and Performance Predictions for a Micromolded Refrigerant Expansion Device



David A. Yashar


The design, fabrication and testing of a thermopneumatic microfabricated valve for controlling refrigerant mass flow rate during expansion is presented in this report. This device was fabricated through nickel electroplating within very thick SU-8 molds, thereby realizing expansion devices useful for small HVAC&R applications through an inexpensive modified UV-LIGA process. This work begins with process development to make meso-scale nickel electroplating within SU8 micromolds a feasible option. Then, two test apparatuses were constructed and used to benchmark the performance of a prototype with compressed air and refrigerant R134a. Next, three dimensional CFD simulations were performed on the flowfield within the device to predict it s ability to control compressed air. A numerical code was also developed to predict the device s temporal response and relationship between actuation level and power input. The assembled prototype was demonstrated on the air flow test bench. The prototype was able to reduce the mass flow rate of the compressed air by 22 % at the conditions used in the CFD analysis. The performance was then demonstrated in a 1.5-2 kW R134a vapor compression system. Steady state data showed that the mass flow rate of refrigerant could be effectively controlled using the valve. The level of refrigerant subcooling defined the magnitude of the response. Steady state data taken at 750 kPa inlet pressure shows the mass flow rate was reduced by 4.2 % at 1 C subcooling and up to 10.8 % at 5 C subcooling for a given level of actuation. Transient system response was characterized using cyclic actuation of the device in the HVAC system. The change in capacity was approximately 5 %, at the conditions used during these tests.
NIST Interagency/Internal Report (NISTIR) - 7327
Report Number


HVAC&R, MEMS, microfabrication, refrigerant expansion, SU8


Yashar, D. (2006), Design, Measurements and Performance Predictions for a Micromolded Refrigerant Expansion Device, NIST Interagency/Internal Report (NISTIR), National Institute of Standards and Technology, Gaithersburg, MD, [online], (Accessed May 26, 2024)


If you have any questions about this publication or are having problems accessing it, please contact

Created April 3, 2006, Updated November 10, 2018