Clarifying the Formation of Equiaxed Grains and Microstructural Refinement in the Additive Manufacturing of Binary Ti-Cu

Published

November 14, 2024

Author(s)

Alec Saville, Adriana Eres-Castellanos, Andrew Kustas, Levi Van Bastian, Donald Susan, Dale Cillessen, Sven Vogel, Natalie Compton, Kester Clarke, Amy Clarke

Abstract

Controlling microstructural evolution in metallic additive manufacturing (AM) is difficult, especially in producing refined as-built grains instead of coarse, directional grains. Traditional solutions involve adding inoculants to AM feedstocks, but titanium (Ti) alloys cannot employ this approach without producing detrimental secondary phases. Ti-Cu (Ti-copper) alloys offer a solution through constitutional supercooling and/or solid state thermal cycling under AM conditions. This work analyzes a compositionally graded directed energy deposition (DED) Ti-Cu build, single-melt laser tracks, and dilatometric heat treatments to evaluate if, when, and by what mechanism(s) microstructural refinement occurs. Refinement by inoculation of unmelted powder particles was also considered. Constitutional supercooling produced no net microstructural refinement as any equiaxed dendrites which form are remelted with new deposition. This finding agreed with solidification modeling of powder bed fusion-laser beam (PBF-LB) and DED builds. Solid state thermal cycling refined microstructures only during ex-situ dilatometric heat treatments, suggesting build parameter optimization is needed to achieve refinement in-situ. Accidental heterogeneous nucleation on unmelted Ti powder, originating from the different thermophysical properties of Ti and Cu, provided the most significant microstructural refinement. This work systematically assesses the microstructural refinement mechanisms of Ti-Cu in AM builds and offers insights into microstructural control in eutectoid alloys.

Citation

Materials & Design

Pub Type

Journals

Download Paper

https://doi.org/10.1016/j.matdes.2024.113440

Local Download

Citation

Saville, A. , Eres-Castellanos, A. , Kustas, A. , Van Bastian, L. , Susan, D. , Cillessen, D. , Vogel, S. , Compton, N. , Clarke, K. and Clarke, A. (2024), Clarifying the Formation of Equiaxed Grains and Microstructural Refinement in the Additive Manufacturing of Binary Ti-Cu, Materials & Design, [online], https://doi.org/10.1016/j.matdes.2024.113440, https://tsapps.nist.gov/publication/get_pdf.cfm?pub_id=957264 (Accessed December 13, 2024)