U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

PUBLICATIONS

Certification of Standard Reference Material 1473b, Low Density Polyethylene Resin

Published

Author(s)

J R. Maurey, Carl R. Schultesiz, William R. Blair, Kathleen M. Flynn

Abstract

The melt flow rate of Standard Reference Material (SRM) 1473b, a polyethylene resin, was determined to be 1.13 g/10 min at 190 degrees C under a load of 2.16 kg using the ASTM Method D 1238-00. The average results from 48 determinations on samples with a standard deviation of 0.013 g/10 min. The overall uncertainty, including type A and type B uncertainties, is estimated as 0.098 g/10 min.
Citation
Special Publication (NIST SP) - 260-144
Report Number
260-144
NIST Pub Series
Special Publication (NIST SP)
Pub Type
NIST Pubs

Keywords

melt flow, melt flow rate, melt index, polyethylene, SRM, Standrd Reference Material

Citation

Maurey, J. , Schultesiz, C. , Blair, W. and Flynn, K. (2002), Certification of Standard Reference Material 1473b, Low Density Polyethylene Resin, Special Publication (NIST SP), National Institute of Standards and Technology, Gaithersburg, MD (Accessed January 14, 2025)

Issues

If you have any questions about this publication or are having problems accessing it, please contact reflib@nist.gov.

Created October 1, 2002, Updated October 16, 2008