U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

PUBLICATIONS

CCM pilot study overview: geometrical measurement of the Rockwell diamond indenter

Published

Author(s)

Renato R. Machado, Samuel Low, Alessandro Germak

Abstract

This paper describes an overview of the capability of the NMIs that participated on the CCM Pilot Study measurement systems, conducted by the CIPM/CCM/Working Group on Hardness, to characterize the Rockwell hardness diamond indenter geometry, by measuring the included cone angle, the straightness of the generatrix, the spherical tip radius, the deviation of the local radius and the tilt angle. Nine NMIs took part in this study: INMETRO (Brazil); INRiM (Italy); KRISS (South Korea); NIM/PR (China); NIMT (Thailand); NIST (USA); PTB (Germany); TUBITAK UME (Turkey); VNIIFTRI (Russia), where INMETRO (Brazil) served as pilot laboratory.
Citation
ACTA IMEKO
Volume
9
Issue
5
Pub Type
Journals

Download Paper

DOI Link

Keywords

hardness, diamond indenter, geometry indenter, pilot study, CIPM/CCM/WGH
Calibration services

Citation

Machado, R. , Low, S. and Germak, A. (2021), CCM pilot study overview: geometrical measurement of the Rockwell diamond indenter, ACTA IMEKO, [online], https://doi.org/10.21014/acta_imeko.v9i5.979 (Accessed December 13, 2024)

Issues

If you have any questions about this publication or are having problems accessing it, please contact reflib@nist.gov.

Created April 5, 2021, Updated March 31, 2022