Perez-murano, F.
, Birkelund, K.
, Morimoto, K.
and Dagata, J.
(1999),
Voltage Modulation Scanned Probe Oxidation, Applied Physics Letters
(Accessed May 9, 2025)
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
Voltage Modulation Scanned Probe Oxidation
Published
Author(s)
F Perez-murano, K Birkelund, K Morimoto,
Abstract
Scanned probe microscope (SPM) oxidation with voltage modulation leads to a significant enhancement of the oxide growth rate, improvement of the aspect ratio of oxide features, and control of the structural and electrical properties of the SPM oxide. Variation of the voltage-pulse parameters confirms that the oxide dimensions can be controlled sensitively over a wide range of pulse parameters and that voltage modulation overcomes the self-limiting character of SPM oxidation by reducing the buildup of space charge within the oxide during growth. The enhancement can be used to increase the writing speed or lower the voltage, both beneficial for practical nanoelectronics fabrication.Citation
Applied Physics Letters
Volume
75(2)
Pub Type
Journals
Keywords
elemental semiconductors, nanotechnology, oxidation, scanning probe microscopy, silicon, space charge
Citation
Issues
If you have any questions about this publication or are having problems accessing it, please contact reflib@nist.gov.
Created June 30, 1999, Updated October 12, 2021