Radiometrically Deducing Aperture Sizes

Published

February 1, 2003

Author(s)

Allan W. Smith, Adriaan C. Carter, Steven R. Lorentz, Timothy M. Jung, Raju V. Datla

Abstract

The desire for high-accuracy infrared sources suitable for low-background seeker/tracker calibrations pushes the limits of absolute cryogenic radiometry and blackbody design. It remains difficult to calibrate a blackbody at flux levels below 1 nW/cm2 using electrical substitution radiometry. Ideally, the blackbody temperature should be chosen so that most of the emitted power lies int he spectral range of interest. This constraint frequently necessitates the use of small apertures (less than 1 mm diameter) to achieve the require reduction in power. However, the dimensions of small apertures are difficult to determine accurately. Also, the effects of diffraction and systematic problems such as aperture heating and light leaks become amplified. To diagnose these problems and to calculate diffractin effects, aperture dimensions must be known accurately. We described a technique of radiometrically deducing the diameter of small apertures in the blackbody in-situ utilizing the cryogencic blackbody calibration.

Citation

Metrologia

Volume

40

Issue

No. 1

Pub Type

Journals

Keywords

aperture, blackbody, cryogenic, infrared, radiometric

Citation

Smith, A. , Carter, A. , Lorentz, S. , Jung, T. and Datla, R. (2003), Radiometrically Deducing Aperture Sizes, Metrologia (Accessed April 27, 2026)

Additional citation formats