Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

Overview of the Manufacture and Certification of Electrodeposited Coating Thickness Standard Reference Materials

Published

Author(s)

Carlos R. Beauchamp, Hilary B. Gates, David R. Kelley, Stefan D. Leigh

Abstract

This paper documents major changes in the production of Electrodeposited Coating Thickness Standard Reference Materials. These standards consist of pre-configured sets of electrodeposited copper on steel substrate coupons with thicknesses ranging from 2.5 m to 2000 m. The coatings are overplated with chromium and the total coating thickness is certified. These standards are primarily intended for use in calibrating coating thickness measurement instruments based on magnetic induction principles. These instruments are used by the coating industry for the nondestructive measurement of nonmagnetic coatings over magnetic substrates. Technical aspects of the manufacture and certification process of these standards are covered. Uncertainties for these certifications were improved to 2 % maximum for mean thickness over previous releases.
Proceedings Title
Proceedings of the NCSL Conference, Charlotte, NC
Conference Dates
July 11-15, 1999
Conference Title
National Conference of Standards Laboratories International

Keywords

coating thickness, magnetic induction, nondestructive measurements, standard reference materials

Citation

Beauchamp, C. , Gates, H. , Kelley, D. and Leigh, S. (1999), Overview of the Manufacture and Certification of Electrodeposited Coating Thickness Standard Reference Materials, Proceedings of the NCSL Conference, Charlotte, NC (Accessed March 29, 2024)
Created May 1, 1999, Updated February 17, 2017