3D Molecular Imaging SIMS

Published

July 1, 2006

Author(s)

John G. Gillen, Albert J. Fahey, M Wagner, Christine M. Mahoney

Abstract

Thin monolayer and bilayer filsm of spin cast poly(methyl methacrylate) (PMMA), poly(2-hydroxyethyl methacrylate) (PHEMA), poly(lactic) acid (PLA) and PLA doped with several pharmaceuticals have been analyzed by dynamic SIMS using SF₅+ polyatomic primary ion bombardment. Each of these systems exhibited minimal primary beam-induced degradation under cluster bombardment allowing molecular depth profiles to be obtained through the depth of the film. By combing secondary ion imaging with depth profiling, 3-dimensional molecular image depth profiles have been obtained from these systems. In another approach, bevel cross sections are cut in the samples with the SF5+ primary ion beam to produce a laterally magnified cross section of the sample that does not contain the beam-induced damage that would be induced by conventional ion beam FIB cross sectioning. The bevel surface can then be examined using cluster SIMS imaging or other appropriate microanalysis technique.

Citation

Applied Surface Science

Pub Type

Journals

Keywords

beam-induced damage, cluster bombardment, depth profile, secondary ion mass spectrometry

Citation

Gillen, J. , Fahey, A. , Wagner, M. and Mahoney, C. (2006), 3D Molecular Imaging SIMS, Applied Surface Science (Accessed November 14, 2026)

Additional citation formats