Quinn, G.
, Ives, L.
and Jahanmir, S.
(2003),
On the Nature of Machining Cracks in Ground Ceramics: Part II, Comparison to Other Silicon Nitrides and Damage Maps, Machining Science and Technology (Accessed June 16, 2026)
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
Secure .gov websites use HTTPS
A lock (
) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.
On the Nature of Machining Cracks in Ground Ceramics: Part II, Comparison to Other Silicon Nitrides and Damage Maps
Published
Author(s)
, L K. Ives,
Abstract
The size and severity of grinding machining cracks in a sintered reaction bonded silicon nitride from part I are compared to data for other silicon nitrides. Crack sizes follow a similar trend with grinding wheel grit size despite differences in microstructures, strengths, and fracture toughnesses. Silicon nitrides with enhanced fracture toughness actually develop deeper machining cracks than cracks in less tough silicon nitrides. Machining damage maps for silicon nitride are devised.Citation
Machining Science and Technology
Volume
9
Pub Type
Journals
Keywords
fractography, fracture toughness, grinding wheel, machining cracks, silicon nitride
Citation
Issues
If you have any questions about this publication or are having problems accessing it, please contact [email protected].
Created May 19, 2003, Updated February 19, 2017